Tag Archive | Tim Holtz Distress Ink – Wild Honey

C’mon Baby Light My Fire!


It’s Wednesday, and this week, I used Walker Walter – TLF013 (High Hopes Rubber Stamps) and Walker Winnie – TLF012 (High Hopes Rubber Stamps) for the main images and Light My Fire – F154 (High Hopes Rubber Stamps) for the sentiment. I thought I would create a Senior’s Valentine’s card with these fun images. This could also be used for an Anniversary card too. After all, you’re never too old to be in love!!!

To make my card this week, I used Hammermill – Premium Colour 100 lb. for my base at 4.25″ x 5.5″. I taped down the card onto a glass mat and then used the stencils Flames – Honey Bee Stamps to create the background using various Tim Holtz Distress inks which I have listed below.

I stamped both the images and sentiment using my Misti and Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I coloured in the images using Copic Markers. Then I fussy cut around both images and in between the walkers. The sentiment was also fussy cut and I cut into 2 pieces to fit my design better. I added 2-sided tape to the back of my sentiments and then attached them to a small piece of Martha Stewart Crafts – Enchanted Woodland paper. Ran this through my Xyron Create a Sticker and then fussy cut around the sentiment again. I found the white too bright when I added it to the card, so I used Copic Y11 to give it some colour.

For the main images, once coloured, I ran both of them through my Xyron Creative Station and adhered them directly to the base. I used my Cuttlebug to cut some hearts out of Martha Stewart Crafts – Enchanted Woodland paper using Sizzix Framelets – Hearts Dotted die. Then I ran them through my Xyron Create a Sticker to change them into stickers and placed them directly onto the base. For the few spots on the images that I didn’t fussy cut, I used Copic markers YR23, YR16 and YR15 to fill in the white spaces.

Card Recipe:

Stamp:  Walker Walter – TLF013 (High Hopes Rubber Stamps), Walker Winnie – TLF012 (High Hopes Rubber Stamps)

Sentiment Background: Light My Fire – F154 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Distress Ink – Barn Door, Tim Holtz Distress Ink – Fired Brick, Tim Holtz Distress Ink – Wild Honey, Tim Holtz Distress Ink – Carved Pumpkin

Paper: Copic Marker X-Press It Blending Card, Martha Stewart Crafts – Enchanted Woodland 12″ x 12″, Hammermill – Premium Colour 100 lb.

Die Cuts: Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted

Stencil: Flames – Honey Bee Stamps

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Xyron Creative Station, Xyron Create a Sticker

Images coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Hair: C5, C3, C1, Gelly Roll Sakura #8 Pen

Shirt, Dress, Earring, Lady’s Shoes, Horn: BG72, BG57, BG32, BG11, C3, C1

Pants: B26, B24, B21

Man’s Shoes: E27, E25, E23, E21, C3, C1

Blouse, Flowers and Socks: RV19, RV17, RV14, RV11, RV10, G09, G07, Y17, Y08

Tennis Balls: YG05, YG03, YG01

Walkers, Horns, Wheels and Grips: C9, C7, C5, C3, C1

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Grad Gnome!!


My nephew graduated and I couldn’t resist sharing this adorable little Graduation Gnome With Diploma from KLM Digital Designs that I made for him. The image comes with 3 different sentiments, “Congrats Grad!”, which I’ve used on my card and also, “Congratulations” and “Today is your day!”.

To make the card, I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers.

I used Hammermill paper to create the base shape of the card 8.5″ x 4.25″. I scored the paper at 4.25″. Then I used a mixture of Tim Holtz inks to create the background. Once I was satisfied with the look, I used Hammerill paper, my Cuttlebug and Your Next Stamp – Confetti Panel Die and popped this die cut up over the coloured background using 3M VHB – 2 sided tape. The sentiment was die cut using MFT – Die-namics Pierced Fishtail Flags, inked around the edges with Tim Holtz Distress Ink – Barn Door and then popped up with 3M VHB – 2 sided tape.

The sentiment was popped up the same way to complete the card.

Card Recipe:

Stamp and Sentiment: Graduation Gnome With Diploma (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Barn Door, Carved Pumpkin, Salty Ocean, Blueprint Sketch, Wild Honey, Festive Berries, Wilted Violet and Lucky Clover

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: Your Next Stamp – Confetti Panel Die – YNSD770, MFT – Die-namics Pierced Fishtail Flags

Tools: 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: E49, E47, E44, E42

Hat, Shoes and Gown: C10, C8, C6, T10, T8, Black (100)

Diploma: E41, E40

Tassel: R59, R39, R37, R35

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Three Kings Bringing Joy


It’s Wednesday, and this week I’m sharing a Christmas card featuring the adorable image Three Kings – T201 from (High Hopes Rubber Stamps) with the sentiment Joy To The World – GLL012 (High Hopes Rubber Stamps).  Have you started your Christmas cards yet?

To create the card this week, I stamped the main image and then coloured it in with Copic Markers. I used my Brother Scan and Cut to cut around the image and then used a black marker to go around all of the edges. For the sentiment, I stamped it out and then used My Creative Time: Fun Vertical Greetings to die cut it.

For the base card I used Hammermill – Premium Colour 100 lb. to create my background at 5.5″ x 4.25″ and also the base card.  I used various Tim Holtz inks listed below to create the night sky and earth at the bottom. After the basic blending was done, I layered Kraftin’ Kimmie – Twinkle Little Stars stencil over top of the base and applied Stampin Up – Whisper White using a sponge dauber. I removed the stencil and cleaned it off. Then placed it on top again. This time, I used a sponge dauber and FolkArt – Extreme Glitter Acrylic Paint to give the stars some sparkle. Note: A little dab of this paint goes a long way. Marvy Uchida – Embossing Heat Tool was used to help speed up the drying process.

Once the paint was all dry, the card was ready to be assembled. I cropped the background to 5.25″ x 4″ and placed it directly onto the base. Then the main image and sentiment were added using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Three Kings – T201 (High Hopes Rubber Stamps)

Sentiment: Joy To The World – GLL012 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Chipped Sapphire, Blueprint Sketch, Salty Ocean, Tumbled Glass, Vintage Photo, Gathered Twigs, Tea Dye, Wild Honey, Stampin Up – Whisper White

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time: Fun Vertical Greetings

Stencil: Kraftin’ Kimmie – Twinkle Little Stars

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, FolkArt – Extreme Glitter Acrylic Paint, Brother Scan and Cut

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Hair: Black, C9, C7, C5, C3, C2, C1

Shoes: C5, C3

Left King Clothing and Urn: V28, V25, V22, E15, YR24, Y35, Y08, R39, R37, R35

Centre King Clothing and Bag: B69, B28, B24, B18, B16, B14, B12, E89, E87, E84, E55, E53, E51, E50, E15, YR24, Y35, Y08

Right King Clothing and Bottle: R59, R39, R37, R35, E15, YR24, Y35, Y08, G19, G17, G14, YG09, YG07, YG03

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Happy 30th Anniversary!


Hi There,

Last week, I celebrated my 30th Anniversary with my loving husband. For our wedding our theme was bears, so I when I saw this image from Critter Celebration (Penny Black Stamps), I fell in love with it. My husband loved his card too when I gave it to him!

I am so blessed and so lucky to have met such a kind and loving man to spend my life with. Together, we have accomplished so much together and our love continues to grow each and every day. He became my best friend when I met and he continues to be my best friend. I hope to have many, many more years ahead with him to explore the world and share our hopes and dreams with each other.

Card Recipe:

Stamp: Critter Celebration (Penny Black Stamps)

Sentiment: AI Art Impressions – Perfect Duet 4999

Paper: Copic Marker X-Press It Blending Card, Stampin’ UP! Wood Textures 6″ x 6″ (15.2 x 15.2 cm), black and golden cardstock

Die Cuts: My Creative Time – Ribbon End Dies, Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Wild Honey

Miscellaneous: Cuttlebug, MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Ranger – Clear Super Fine Detail embossing powder.

Coloured with Copic Markers:

Bears: W5, W3, W1, W0, Colorless Blender

Presents: B29, B26, B23, B06, B04, B02, RV23, RV21, RV04, YR24, Y17, Y13

Tag: E53, E51

Dock: E59, E35, E33, E31

Cattails: E79, E77, E25

Weeds: G28, YG99, YG61, G03

Sky: B01, B00, B000, B0000

Clouds: C1, C0, B60

Have a Honey of a Day!


Welcome OCS Fans!

Today is Wednesday and I’m back to share this adorable little bear thoroughly enjoying his honey! The stamp I’m featuring today is called Favourite Honey Bear (High Hopes Rubber Stamps) and the sentiment is Honey of a Day (High Hopes Rubber Stamps)!

He’s having a “Honey of a Day” and I hope you do too!

Card Recipe:

Stamps: Favourite Honey Bear (High Hopes Rubber Stamps) – S500, Honey of a Day (High Hopes Rubber Stamps) – G061

Copic Markers:

Bear: E79, E37, E35, E33, E31, E53, E51, E50, R22, R20, R01

Honey and Jar: Y38, Y18, Y17, Y35, YR21, Y11, R27, RR4

Flowers: BV04, BV01, BV000, Y35, YR21, Y11, G17, G14, G07

Inks: Tim Holtz Ranger Distress Ink – Broken China, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Inks – Ground Espresso, Tim Holtz Distress Ink – Wild Honey, Memento – Tuxedo Black, Versamark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: Lawn Fawn – Grassy Hillside Borders, My Creative Time -Stitched Squares Inside and Out, My Creative Time – Scalloped Stitched Oval Dies

Background Paper: Bee Digital Paper – DigitalDesignsand Art, Pebbles – “Home Grown” 6 x 6 in. (15.2 cm x 15.2 cm), Momenta – Cardstock, Recollections – Brown

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

 

 

Birthday Girl – Fearless!


Hello There! Sharing a card with you today that I made for a very special co-worker who works non-stop to please everyone in our office as she manages everything from booking flights, creating Purchase Orders, setting up meetings, etc. The list goes on forever. She goes above and beyond her position and we all love her dearly for it. She takes our cubicles apart and rebuilds them all when the need arises or adds in new cubicles for new hires, decorated all of the offices for management and at times you can even see her up on a ladder fixes ceiling tiles or changing lightbulbs. LOL!

So for this year, I just had to make birthday card featuring the stamp from Kraftin’ Kimmie called “Fearless Farah“. I used both the image and sentiment from this collection. The sentiment couldn’t have described her any better. LOL!

To create the texture for the brick wall, I ran the Darice – Brick Wall embossing folder through my Cuttlebug using Bristol paper. Then ran Tim Holtz Distress Ink – Rusty Hinge across the top of the paper. Next I used a watercolour brush and a mixture of Tim Holtz Distress Ink – Tea Dye, Tim Holtz Distress Ink – Vintage Photo and Tim Holtz Distress Ink – Rusty Hinge to create the texture.

To make the sign I first embossed the sentiment and then used Craftin Desert Diva’s Fancy Frames die to cut it out. Edged around with Tim Holtz Distress Ink – Wild Honey.

 

Copic Markers Used:

Hair: E51, E35, E29, E25

Skin: E000, E00, E21, E11, E04, R22, R20

Eyes: E35, E15, E37, E29, E49, 100, R00, Colourless Blender, W1, R02, Gelly Roll Sakura #8 Pen

Pants: B06, B04, B02

Shirt / Bandana: BG13, BG11, BG10

Bricks: E97, E19, E08

Drill: C9, C5, C3, C1, R27, R24, Y17, Y08

Embossing Folder: Darice – Brick Wall

Inks: Tim Holtz Distress Ink – Tea Dye, Tim Holtz Distress Ink – Vintage Photo, Tim Holtz Distress Ink – Rusty Hinge, Tim Holtz Distress Ink – Wild Honey, Memento – Tuxedo Black, VersaMark – Black Onyx

Die Cuts: PaperCrafter Today – 15 Die Cut Sentiment Set, Craftin Desert Diva’s Fancy Frames

Paper: Copic Marker X-Press It Blending Card

Tools: Cuttlebug, MISTI – Most Incredible Stamping Tool