Archives

Kit and Clowder – Penguin Bauble!

Dec5

Today I’m sharing a Christmas card that I made following a video for the Penguin Bauble Colouring class by Alyce Keegan at Kit and Clowder during the November Summit Class.

The image provided by Alyce was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers. Once I finished colouring the image, it was fussy cut leaving a slim border. The sentiment was stamped onto some white cardstock in my stash using VersaFine – Majestic Blue ink, MISTI and Kraftin’ Kimmie – It’s Penguining To Look A Lot Like Christmas!  stamp. Ranger – Clear Super Fine Detail embossing powder was applied over top of the ink and it was heat embossed with a Marvy Uchida – Embossing Heat Tool. Lastly, I used a Sharpie – Gold Medium Point – Water Based Paint pen to go around the edges.

The base card was created to the size of 6″ x 6″ out of Hammermill – Premium 110 lb. cardstock. Gold cardstock from Chloe’s Crafts Paper Pad was applied directly to the base of the same size using liquid glue. Waffle Flower Crafts – Nesting Squares were used to die-cut Crafter’s Companion – Snowflake Swirls designer paper for the background and Moonstone – Hunkydory – Vintage Filigree Frame die was used to die cut Chloe’s Crafts Paper Pad – Navy Blue paper. I applied both of these directly to the the front of the card using liquid glue and then popped up the finished image and sentiment onto the card using U-Line double-sided foam tape.

Below is the original coloured image before creating the card to go with it.

Card Recipe:

Stamp: Kit and Clowder – Penguin Bauble

Sentiment: Kraftin’ Kimmie – It’s Penguining To Look A Lot Like Christmas!

Inks: HP Printer High Quality Grayscale, VersaFine – Majestic Blue

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Chloe’s Crafts Paper Pad – 02-3129420 (6″ x 6″), Crafter’s Companion – Snowflake Swirls (12″ x 12″)

Die Cuts: Moonstone – Hunkydory – Vintage Filigree Frame, Waffle Flower Crafts – Nesting Squares

Miscellaneous: U-Line Double-Sided Foam Tape, White Gelly Roll Sakura #10 Pen, Ranger – Clear Super Fine Detail embossing powder, Marvy Uchida – Embossing Heat Tool, Sharpie – Gold Medium Point – Water Based Paint pen, U-Line Double-Sided Foam Tape

 

Hope you like it and have a great week!

Penguin and Reindeer Friend!

Dec19

Today I’m sharing a Christmas card that I made using Whimsy Stamps – Penguin and Reindeer Friend and Penny Black Creative Dies – Antique Frame.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers. Once I finished colouring the image, I applied Copic B000 all around it and then fussy cut the image out leaving a slim border.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Stampin’ Up – Snowflake Splendor Designer Series Paper was cut to the same size as the base card. Using a Cuttlebug and Penny Black Creative Dies – Antique Frame, I die cut the centre of the paper, keeping the original size as well. The same dies were also used to cut out a larger rectangle out of Hot Buy – Recollections – Jewel Tones paper. To create the snow, I first die cut the snow drifts with Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper and Spellbinders – Color Block Scenic Scape dies. Next, so that I could keep the same shape as the snowflake die cut, I once again ran both of the snow die cuts through the cutting machine using the Penny Black dies. All of the die cuts were inked around the edges with a finger dauber and Tim Holtz Distress Ink – Salty Ocean. Tim Holtz Distress Inks – Tumbled Glass was applied to the top of the snow banks to give them some contrast.

The whole card was now ready to assemble.

Liquid glue was applied to the larger snowflake border and then applied directly onto the base card. U-Line Double-Sided Foam Tape was applied to the completed image, small snow drift and each of the rectangle die cuts. The larger die cut rectangle was popped up onto the centre of the snowflake base. Liquid glue was applied to the larger snow drift and it was applied directly to the smaller snowflake die cut. Another layer of U-Line Double-Sided Foam Tape and some liquid glue were applied to the smaller snow drift then it was popped up onto the larger snow drift. The penguin and reindeer image was popped up behind the smaller snowdrift. I also applied some liquid glue to the foam tape so that it would adhere better to the sparkle cardstock. Lastly, I fussy cut a sentiment from Creative Expressions – Wordies Sentiment Sheets – Christmas Script and popped it up onto the top of the card.

Card Recipe:

Stamp: Whimsy Stamps – Penguin and Reindeer Friend

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Stampin’ Up – Snowflake Splendor Designer Series Paper, Hot Buy – Recollections – Jewel Tones, Creative Expressions – Wordies Sentiment Sheets – Christmas Script (CEW022)

Die Cuts: Penny Black Creative Dies – Antique Frame 51-937, Spellbinders – Color Block Scenic Scape (S3-418)

Miscellaneous: U-Line Double-Sided Foam Tape, White Gelly Roll Sakura #10 Pen, Sakura Glaze – Black, Pigma Micron 03 black marker

Image coloured with Copic Markers:

Penguin: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, RV00, E43, E42, E41, E40, Colorless Blender, (Eyes – Sakura Glaze – Black, White Gelly Roll Sakura #10 Pen), Pigma Micron 03 black marker

Scarf and Hat: BG09, BG05, BG02, BG01

Reindeer: E35, E33, E31, E18, E15, R02, R01, R00, C1, C00, (Eyes and Nose – Sakura Glaze – Black, White Gelly Roll Sakura #10 Pen), Pigma Micron 03 black marker

Bells and Collars: YR23, Y15, Y11, Y00, R46, R14, R08

Leash: G16, YG25, YG23

Hope you like it and have a great week!

Pre-Colored Snowflake Gnome!

Dec18

Today I’m sharing a Christmas CAS card that I made using KLM Digital Designs – Pre-Colored Snowflake Gnome from the new December 2024 Release. This pre-coloured image makes it very easy to create lots of last minute Christmas cards.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Whimsy Stamps – Blurry Flurries paper was cut to the same size and applied to the base card using double-sided tape.

The image was printed out onto Copic Marker X-Press It Blending Card and fussy cut. Joy Crafts – Merry Christmas Cutting Stencil was die cut using a Cuttlebug and Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper. This was applied along the top of the card using liquid glue. With a spatula, DecoArt Snow-Tex was applied along the bottom of the card and then some glitter was sprinkled onto it while it was still wet. Gentle pressure was used to push the glitter into the DecoArt Snow-Tex. U-Line Double-Sided Foam Tape was applied to the upper part of the image and it was popped up onto the card. Lastly, Stickles – Diamond was applied along the bottom of the feet.

Card Recipe:

Stamp: KLM Digital Designs – Pre-Colored Snowflake Gnome

Sentiment Die: Joy Crafts – Merry Christmas Cutting Stencil (6002/0683)

Inks: HP Printer

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Whimsy Stamps – Blurry Flurries WSDP25 (6″ x 6″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Miscellaneous: U-Line Double-Sided Foam Tape, DecoArt Snow-Tex, Stickles – Diamond

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

NOTE: KLM Designs will be closing as of January 1st, 2025. All physical stamps are now $2.50!
Stock up while supplies last!


Matchbook Nativity!

Dec2

Today I’m sharing another miniature Match Book Christmas card using Art Impressions – MB Nativity – 5443 and MB Template Dies (5317). The closed size is 1.75″ x 2″.

To create the card, I began with the card base using Stampin’ Up! Wood Textures double-sided paper, Cuttlebug die-cutting machine and the Art Impressions – MB Template Dies (5317). From the same die set, the sentiment pop-up and star were cut out using Hammermill – Premium Colour 100 lb. cardstock and Recollections – Matte Gold Foil cardstock.

With Memento – Tuxedo Black ink and my MISTI, I stamped all of the images onto Copic Marker X-Press It Blending Card. I coloured in all of the images and then, using the Cuttlebug again, I die cut all of the inside pop-ups using Art Impressions – MB Nativity – 5443. The windows were done 4 times, 2 for the outside and 2 for the inside of the card. I cut a really small piece of plastic from a clear bag to be the same size as the window and glued it to the card before adding on the outside windows to simulate a window pane. Versafine – Majestic Blue was stamped onto the sentiment pop-up. Lastly, I die cut the envelopes using Craft Smith – Peppermint Twist double-sided paper and Art Impressions – MB Envelope Die (5318). (Not shown in photo.)

Double-sided tape was applied to do the assembly on the tabs. They were then all adhered to the base card. I created a little 1.5″ x 1.5″ white square and attached it to some Recollections – Red cardstock. I then cut around it again to create a slim border. I glued this onto the back of the card in order write my sentiment. The card was then folded up and put into the little match book envelope. Double-side tape was also applied to the flaps of the larger envelope to complete the assembly.

Card Recipe:

Stamps and Sentiment: Art Impressions – MB Nativity – 5443

Inks: Memento – Tuxedo Black, Versafine – Majestic Blue

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Stampin’ Up! Wood Textures 6″ x 6″ (15.2 cm x 15.2 cm), Recollections – Matte Gold Foil cardstock, Craft Smith – Peppermint Twist (6″x6″)

Dies: Art Impressions – MB Nativity – 5443, MB Template Dies (5317), MB Envelope Die (5318)

Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug

Image coloured with Copic Markers:

Baby and Blanket: E21, E11, E00, E000, R20, B37, B34, B32

Cat: C8, C6, C5, C4, R30, R20

Bird: B37, B34, B32, YR15, R20

Sheep: C8, C6, C1, C0, C00, R20, R02, R01, R00, R000

Donkey: W8, W6, W5, W4, W3, W1, W0, R20, R02, R00, C8, C6

Cow: E99, E95, E33, E31, E30, E15, E13, E11, R20, R02, R00, C8, C6

Boards and Crib: E39, E35, E33, E29

Hope you like it and have a great week!

Christmas Wagon Kitty!

Nov20

Today I’m sharing a Christmas card that I made using Dis Digi Stamps – Christmas Wagon Kitty (Retired).

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Craft Smart – Hot Buy – Happy Pawlidays paper was cut to the same size and adhered to the base using double-sided tape. Tim Holtz Distress Ink – Rustic Wilderness was inked around all of the edges of the card using a finger dauber. I chose a sentiment from Photo-Play Santa Paws Cats – Stickers and applied it to some red cardstock from my stash and then fussy cut around it and set it aside. With my Cuttlebug, I die cut Crafter’s Companion Luxury Cardstock – Red matte finish with PinkFresh Studio – Essentials: Folk Edge Squares.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. The image was coloured in with Copic markers. Sakura Glaze – Black Pen was used to colour in the eyes and nose. The eyebrows, mouth, tail and finer details on mouse were enhanced using a PrismaColor Black pencil. The whiskers were also added using the black pencil. Gelly Roll Sakura #5 Pen was applied to create the dots in the eyes and on the nose. To create the snow in the sky, Gelly Roll Sakura #10 Pen was applied to make some snowflakes larger and smaller than others. On the presents, a UNI Posca Pen – Gold was used on the ribbon and dots on the presents. Lastly, Stickles – Diamond was applied to the cuff of the hats, pompoms and snow on the ground.

The card was now ready to assemble. U-Line Double-Sided Foam Tape was applied to the image and it was popped up onto the red square die cut. Once again, it was applied to the die cut and the sentiment. Both items were then popped up onto the card to complete it.

Card Recipe:

Stamp and Sentiment: Dis Digi Stamps – Christmas Wagon Kitty (Edited -2) (Retired)

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Crafter’s Companion Luxury Cardstock – Red, Craft Smart – Hot Buy – Happy Pawlidays (12″ x 12″), Photo-Play Santa Paws Cats – Stickers

Dies: PinkFresh Studio – Essentials: Folk Edge Squares

Miscellaneous: U-Line Double-Sided Foam Tape, Sakura Glaze – Black Pen, UNI Posca Pen – Gold, Stickles – Diamond

Image coloured with Copic Markers:

Kitty Cat: YR68, YR18, YR31, Y38, R02, R01, R00, PrismaColor Premier Pencil – Black, Sakura Glaze – Black Pen (Nose)

Mouse: W3, W1, W0, R02, R01, R00, PrismaColor Premier Pencil – Black, Sakura Glaze – Black Pen (Nose)

Hats and Bows: R59, R37, R35

Presents: BG72, BG57, BG32, BG11, G16, YG25, YG23, Y19, Y17, Y15, UNI Posca Pen – Gold, Gelly Roll Sakura #5 Pen, Gelly Roll Sakura #10 Pen

Wagon and Wheels: E27, E25, E23, E21, C9, C7, C5, CC, C1, C0

Sky: B05, B04, B02, B01, Gelly Roll Sakura #10 Pen (Snow)

Snow and Shadows: BG000, BG0000

Hats and Sparkle on Snow: Stickles – Diamond

Hope you like it and have a great week!

You Got This!!

Jan26

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Lasso Some Snow – TDG021  for the main image and Don’t Worry – FDG021 for the sentiment. We all need a little bit of encouragement every now and then and this little snowman is here to give us some.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Echo Park Paper Co. – My Favorite Winter cardstock cut to the same size as the base card for the background. I attached this to the base using double-sided tape. Using my Cuttlebug, a mixture of square dies from My Creative Time -Stitched Squares Inside and Out and Waffle Flower – Nesting Square dies, I die cut cardstock from Scrapbook.com Neutrals Smooth Cardstock and also Copic Marker X-Press It Blending Card. I applied double-sided tape to the back of the tan square and applied it directly to the background. U-Line double-sided tape was added to the back of the dark brown square and popped up onto the centre of the tan square.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock square and coloured it in with Copic markers. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. Sakura Glaze – Black and Gelly Roll Sakura #5 Pen were used on the eyes of the snowman. I applied U-line douhble-sided tape to the back of the completed image and popped it up onto the centre of the dark brown square.

With my MISTI and Memento – Tuxedo Black ink, I stamped the sentiment onto Recollections – White cardstock and then die cut it out using my Cuttlebug and My Creative Time – Ribbon End Dies. I inked around the edges using Copic – E59 marker to give it a dark brown border. I used my knife to remove the double border from the piece left behind and then traced the shape of the ribbon onto the remaining piece of Scrapbook.com Neutrals Smooth Cardstock. I cut this out with my cutter and scissors. U-Line double-sided tape was applied to both pieces and the completed sentiment was popped up onto the card below the main image to complete the card.

Card Recipe:

Stamp: Lasso Some Snow – TDG021 (High Hopes Rubber Stamps)

Sentiment: Don’t Worry – FDG021 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park Paper Co. – My Favorite Winter (6″ x 6″), Scrapbook.com – Neutrals Smooth Cardstock (5.5″ x 4.25″), Recollections – White cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Waffle Flower – Nesting Square dies, My Creative Time – Ribbon End Dies

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Cuttlebug

Image coloured with Copic Markers:

Snowman: B60, C9, C7, C5, C00, E49, YR18, YR16, YR12, Colorless Blender (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Hats, Mitts and Scarf: B99, B977, B95

Coat: E51, E50, E37, E35, E34, E33, E31

Birds: E59, E37, E35

Fence: E29, E27, E25, E23, E21

Wheel and Rope: E77, E74, E47, E44, E43, Y35, YR31

Sky: B04, B02, B01, B00

Snow: B000, B60, C00, Colorless Blender, Stickles – Diamond

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Beautiful Day!!

Jan18

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Winter Kitty – SDG006  for the main image and Beautiful Day – FDG013 for the sentiment. We just had a major snowfall over the last few days and this little kitty is all bundled up and ready to play!

Growing up we had a lot of snow during the winter and couldn’t wait to put on our mitts and snow boots and go out to play. We had huge snow banks in the schoolyard across the street and would toboggan down them or just slide down in our snow suits! LOL! It was sooooo much fun! Sometimes we even made big snow forts in the backyard with tables and chairs made out of ice and snow. We hardly spent anytime indoors and didn’t usually go back into the house until we had to or we were turning blue because it was so cold out, but even then we still wanted to continue playing outdoors. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Scrapbook.com – Rainbow Smooth Cardstock for the main background paper. It was already the same size as the base, so no cutting had to be done. To get more use out of the same paper, I had cut the oval frame using my Cuttlebug and Hero Arts – Infinity Die Ovals first. Then, I placed the Rainbow cardstock onto the card base using double-sized tape. I die cut the square background using My Creative Time -Stitched Squares Inside and Out and Pebbles – Winter Wonderland paper and the rectangle to the size of 4″ x 4″. The rectangle was cut from from the same paper pack to the size of 1.25″ x 4″. I inked around the edges of both shapes with a sponge dauber and Tim Holtz Distress Ink – Evergreen Bough. Using double-sided tape, I placed both shapes over the pink background and hid where I cut the oval with the square. I cut out a smaller oval using the same Hero Arts – Infinity Die Ovals and Copic Marker X-Press It Blending Card. I also cut out a 1.5″ circle using a circle punch. Lastly, I die cut the scalloped circle using WeR Memory Keepers – Quickutz Nesting Scallops dies and Hot Buy Craft Smart – Holiday Glitz Glitter Paper.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock oval and the sentiment onto the circle. I coloured in the image with Copic markers and then added some Ranger – Emboss It Pen Clear to the bottom of the oval and applied WOW! Sparkling Snow Embossing Glitter. I heat embossed this and added more embossing powder several times to create a thicker layer with my Marvy Uchida – Embossing Heat Tool. Then I added some Cosmic Shimmer Fluffy Stuff and heat embossed it as well to puff it up. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. Sakura Glaze – Black and Gelly Roll Sakura #5 Pen were used on the eyes and nose of the cat.

I inked around the edges of the large pink oval and the circle with Tim Holtz Distress Ink – Picked Raspberry. I applied the coloured image directly to the pink oval and the sentiment circle to the scalloped circle using some liquid glue. Both shapes were then popped up onto the card using U-Line double-sided tape. To completed the card and add in some extra sparkle, I applied some YNS Gumdrops – Winter Wonderland to the background patterned paper.

Card Recipe:

Stamp: Winter Kitty – SDG006 (High Hopes Rubber Stamps)

Sentiment: Beautiful Day – FDG013 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Picked Raspberry, Ranger – Emboss It Pen Clear

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Rainbow Smooth Cardstock (4.25″ x 5.5″), Pebbles Winter Wonderland 6″ x 6″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Hero Arts – Infinity Die Ovals, WeR Memory Keepers – Quickutz Nesting Scallops, 1.5″ Circle Punch

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Cuttlebug, YNS Gumdrops – Winter Wonderland

Image coloured with Copic Markers:

Kitty: N7, N5, N3, R02, R00, RV66, RV63, RV55 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Sky: B05, B04, B02, Gelly Roll Sakura #10 Pen

Snow: WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Good Times!!

Jan11

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Bird Song – TDG016  for the main image and Good Times – FDG014 for the sentiment. These little birdie friends know how to whistle a tune. Unfortunately, I myself never mastered how to whistle! I’ve tried over the years, but just can’t seem to do it. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Scrapbook.com – Brights Smooth Cardstock for the background paper. This paper is great because it’s already cut to size which makes it so easy. I applied it to the base using double-sided tape. Using my Cuttlebug and Your Next Die – Stitched Frame Snowfall Hill die set, I die cut the centre piece from Copic Marker X-Press It Blending Card and the frame from Crafter’s Companion – Luxury Cardstock – Gold.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock and the sentiment onto Recollections – White cardstock. I coloured in the image with Copic markers and then added some Stickles – Diamond and Stickles – Waterfall to the parts of the snow to make it sparkly. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. To make the eyes stand out a little more, I used Sakura Glaze – Black and then added a white dot using Gelly Roll Sakura #5 Pen. Once the stickles were dry, I turned the coloured image and frame over and taped them together on the back with some Scotch tape to keep the 2 pieces together. U-line double-sided tape was then applied and I turned it over again and popped it up onto the card. The sentiment was die cut using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider. I inked around the edges with Sharpie – Gold Medium Point – Water Based Paint pen, added U-Line double-sided tape to the top half of the sentiment and added it on top of the image. Lastly I added some YNS Gumdrops – White Sugar and Sparkle to complete the card.

Card Recipe:

Stamp: Bird Song – TDG016 (High Hopes Rubber Stamps)

Sentiment: Good Times – FDG014 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Brights Smooth Cardstock (4.25″ x 5.5″), Recollections – White, Crafter’s Companion – Luxury Cardstock – Gold

Die Cuts: Your Next Die – Stitched Frame Snowfall Hill, Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Stickles – Diamond, Stickles – Waterfall, Cuttlebug, YNS Gumdrops – White Sugar and Sparkle

Image coloured with Copic Markers:

Bird1 and Scarf: R59, R39, R37, R35, R29, R27, BG09, BG09, BG05, BG02, BG01, BG000 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Bird2 and Scarf: Y17, Y15, Y13, Y11, Y02, Y00, BG72, BG57, BG49, BG32, BG11, Gelly Roll Sakura #5 Pen

Bird3 and Scarf: R56, R46, R37, R24, R22, C9, C7, C5, G16, G14, YG23, YG03

Beaks and Claws: YR18, YR14, YR12, Y19, Y08

Pine Needles: G29

Sky: B05, B04, B02, B01, Gelly Roll Sakura #10 Pen

Snow: C1, Stickles – Diamond, Stickles – Waterfall

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.