Tag Archive | Lawn Fawn – Stitched Hillside Borders

Happy Father’s Day Gnomes


KLM Digital Designs released some brand new stamps this month, and today I’m sharing Dad and Kid Gnomes (KLM Digital Designs)!  This new stamp contains adorable images of a dad, his children and 3 loving sentiments for your father. This stamp allows you to create your card to represent all of your siblings with your dad or just 1 if it is a special card.

For this card, I decided to create a card from a son to his dad.

To put the card together, I printed out the main image onto Copic Marker X-Press It Blending Card and the sentiment onto Hammermill Premium Colour paper.

I die cut the Hammermill paper with Your Next Stamp – Stitched Rectangle Die Set. Then using stencils that I made with Avery Elle – PiercedCloudsDie, I created the sky using Tim Holtz Distress Ink – Salty Ocean. For the grassy hillsides, I created stencils using Lawn Fawn – Stitched Hillside Borders and Lawn Fawn – Simple Stitched Hillside Borders – Lawn Cuts. Then I used Tim Holtz Distress Inks – Bundled Sage, Mowed Lawn, Crushed Olive and Peeled Paint to create the colour variations of the hills.

I coloured in the main image with copics and then fussy cut around them. Then I used a black marker to go around all of the edges. I attached the background to some AC White cardstock cut at 5.5″ x 4.25″. Then to finish off the card, I popped up the 2 coloured images with 3M VHB – 2 sided tape and placed them onto the background.

Card Recipe:

Stamp and Sentiment: Dad and Kid Gnomes (KLM Digital Designs)

Inks: HP Printer Greyscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., AC White Cardstock

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set (YNSD214), Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, Lawn Fawn – Stitched Hillside Borders, Lawn Fawn – Simple Stitched Hillside Borders – Lawn Cuts

Background Inks:

Sky:Tim Holtz Distress Ink – Salty Ocean

Grass: Tim Holtz Distress Ink – Bundled Sage, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Inks – Peeled Paint

Tools: 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

Beard: W5, W4, W3, W1, W0, W00

Pants and Hat – Dad: E89, E87, E84

Coat – Dad: YG95, YG93, YG91

Boots: C10, C8, C5, C3

Cane: E29, E25, E23

Overalls – Boy: B26, B23, B21. E15, Y28, Y26, Y19

Shirt – Boy: YG95, YG93, YG91

Hat and Socks – Boy: E89, E87, E84

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Herd It Was Your Birthday!!!


KLM Digital Designs has just released some brand new stamps this month, and today I’m sharing Woman Farmer Gnome (KLM Digital Designs)! She’s taking some time out from her chores on this beautiful sunny day to wish you a Happy Birthday.

For this card, I printed out the image with my HP Printer onto Copic Marker X-Press It Blending Card using Greyscale. Then I coloured it in with Copic markers and fussy cut around it. I used a  black marker to go around all of the image to hide the white paper from where I fussy cut it. I couldn’t cut out the portion between the girl and the shovel, so I used my copics to match the background that I created with the Tim Holtz inks.

For the background, I used Your Next Stamp – Stitched Rectangle Die Set die and my Cuttlebug to cut Strathmore Bristol Paper (100 lb. – 270 g/m2). Next I created some stencils from Avery Elle – Pierced Clouds Die and Lawn Fawn – Stitched Hillside Borders. I used these stencils to create the cloudy background and the fields behind the farm girl using Tim Holtz Distress Inks.

I had a small scrap strip of patterned paper from Doodle Bug Designs Inc. – Down on the Farm and thought it would go perfectly with this card. I applied this to a 5.5″ x 4.25″ card base from AC Cardstock – Autumn collection. I printed out the sentiment and fussy cut it to split it up and attached it on top of the base background. I then popped up the colored image using 3M VHB – 2 sided tape onto the background that I created earlier. Then I popped up the entire background onto the base card. I added in a few Party Time dots from Kraftin’ Kimmie Dots and inked around the entire card with Tim Holtz Distress Inks – Peeled Paint to finish it off.

Card Recipe:

Stamp and Sentiment: Woman Farmer Gnome (KLM Digital Designs)

Inks: HP Printer Greyscale, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Down on the Farm – 6″ x 6″ paper pad, AC Cardstock – Autumn, Strathmore Bristol Paper (100 lb. – 270 g/m2)

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set (YNSD214), Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 Pierced Clouds Die, Lawn Fawn – Stitched Hillside Borders

Tools and Miscellaneous: Cuttlebug, 3M VHB – 2 sided tape, Kraftin’ Kimmie Party Time Dots, Xyron Create a Sticker

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E18, E08, YR18, YR14

Pants: B26, B23, B21

Shirt: YG95, YG93, YG91

Hoe: C5, C3, C1, E39, E35, E31

Boots and Hat: E29, E27, E25, E23

Background: YG61, YG03, YG01, B000, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Inks – Peeled Paint

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Nordic Night Snowy Delight!


Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and today I’m sharing a card that I made using the image Nordic Snowman with Bird (TLF010) (High Hopes Rubber Stamps) from our latest Christmas release. I just love the serenity of this image.  I grew up in Northern Canada and have always loved snow. It’s always so beautiful watching it come down from the sky. Not so much fun when you have to shovel it or drive through a snow storm, but other than that, it is quite beautiful! LOL! Did you grow up where there was a lot of snow too?

To make my card, I first stamped the image using Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. Then I ran the stamped image through my Cuttlebug and die cut it with Craftin Desert Diva’s Fancy Frames.

I decided to colour in the sky first with various blue Copic markers. After I coloured in the sky, I added in the falling snow using Gelly Roll Sakura #10 Pen.

I thought the sweater looked Scandinavian, so I decided to colour it similar to some Scandinavian  sweaters that I’ve seen in the past. I used Sakura Glaze – Black pen to pop up the eyes and smile on the snowman and lastly added some Stickles – Diamond for the pom-poms on the hat and along the top of the snow on the sweater. I also coloured over top of the black snowflakes with Gelly Roll Sakura #10 Pen and Gelly Roll Sakura #5 Pen on the sweater and hat.

For the snow at the bottom of the snowman, I used the same die-cut, Craftin Desert Diva’s Fancy Frames, to cut out the base using Recollections – Christmas Inkjet Printable Glitter Paper. I then ran this same paper through my Cuttlebug again, this time using the die cut from Lawn Fawn – Stitched Hillside Borders. Next I popped it up on the image using 3M VHB – 2 sided tape.

I die-cut some patterned paper using Your Next Stamp – Stitched Rectangle Die Set (YNSD214) that I had in my stash and then popped up the coloured snowman image onto it using 3M VHB – 2 sided tape.

For the sentiment I used Winter Delight (G114) (High Hopes Rubber Stamps). I stamped the sentiment and then die-cut it out using Craftin Desert Diva’s – Tag Essentials Dies. Then I went around the border of the die-cut with Gelly Roll Stardust – Clear pen and drew in some small snowflakes.

I then die-cut some snowflakes using Poppy – Simple Snowflakes (Style 1931) from Recollections – Christmas Inkjet Printable Glitter Paper. Once the snowflakes were all cut out, I ran them through my small Xyron to make them into stickers.

To assemble the card, I started with a base of 6″ x 6″ white AC cardstock. Next I mounted American Crafts – Wonderland Collection paper for my background. I chose this particular pattern as I thought it matched the image so well. I attached the mounted snowman directly to the background paper using 2-sided tape. I popped up my sentiment using 3M VHB – 2 sided tape. Added my snowflakes and then finished off the card by adding in little gems in the centre of each snowflake and 1 on the sentiment.

Card Recipe:

Stamp:  Nordic Snowman with Bird (TLF010) (High Hopes Rubber Stamps)

Sentiment:  Winter Delight (G114) (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, AC Cardstock – White,

Die Cuts: Poppy – Simple Snowflakes (Style 1931), Craftin Desert Diva’s – Tag Essentials Dies, Craftin Desert Diva’s Fancy Frames, Lawn Fawn – Stitched Hillside Borders, American Crafts – Wonderland Collection – 6 x 6″ (15.2 x 15.2 cm) paper pack

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Gelly Roll Stardust – Clear pen, Xyron, Forever in Time – Round Gemstone Stickers, Rhinestone Selection – Dress Up Sheet – Red, Stickles – Diamond,

Image coloured with Copic Markers:

Night Sky: B99, B97, B37, B34, B32, B29, B24, B21, Gelly Roll Sakura #10 Pen

Moose: E27, E25, E23, E35, E33

Snowman: E27, E25, E23, YR18, YR16, YR14, YR12, Y15, BV20, C0, Colorless Blender,

Sweater and Hat: R59, R37, R35, C4, C3, C2, E41, E40, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Stickles – Diamond

Scarf: YG67, YG17, G21, R59, R37, R35

Cardinal: R59, R37, R35, Y17, Gelly Roll Sakura #5 Pen

Tree \ Holly Leaves: G99, YG67, YG17, G21, R59, R35

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Woodland Santa


Welcome High Hopes Rubber Stamps Fans

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Christmas. YAY!!!  This week, I used Woodland Santa – R098 (High Hopes Rubber Stamps) for the main image and a sentiment from our new release called O Christmas Tree – GLL002 (High Hopes Rubber Stamps).

To create the scene, I cut out various sizes of trees and then used Tim Holtz Distress Inks to colour them. I also cut out various layers of snow from Recollections – Christmas Inkjet Printable Glitter Paper. Other pieces from the same paper, I just tore for a variation in the snow. I ran all of the little trees and snow through the Xyron Creative Station which made it much easier to put the scene together. Lastly, I popped up the image and sentiment with 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Woodland Santa – R098 (High Hopes Rubber Stamps)

Sentiment: O Christmas Tree – GLL002 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Gathered Twigs, Tim Holtz Distress Ink – Forest Moss, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Pine Needles and Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Recollections – Northern Lights – 6″ x 6″ (15.2 cm x 15.2 cm), Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Crafter’s Companion – Luxury Cardstock – Green

Die Cuts: Lawn Cuts – Simple Stitched Hillside Borders – Lawn Fawn, Lawn Fawn – Stitched Hillside Borders, Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860, Your Next Die – Skating Rink Scene Die Set, Elizabeth Craft Designs – 1691 – Village Edges

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Gelly Roll Sakura #8 Pen

Image coloured with Copic Markers:

Skin: E000, E00, E04, E21, E11, R22, R20

Hair and Beard: W3, W2, W1, W0

Hat and Pants: R59, R37, R35, Stickles – Icicle

Shirt: YG17, R27, BG99, R17

Boots and Mitts: C10, C9, C7, C5

Wood for Axe and Tree Trunk: E29, E25, E21

Axe: C5, C3, C1

Tree: G99, YG67, YG17, G21

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Reindeer Magic


Hi There! Sharing a Christmas card that I made using “Kraftin’ Kimmie – Reindeer Games” stamp set! I love this little set. It is so much fun to work with.

Here are some close-ups of the coloured images:

 

Stamped onto Copic Marker X-Press It Blending Card using
MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. Coloured the images with a mixture of Spectrum Noir and Copic Alcohol markers.

Background snow – Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Background paper – ColorPlay – Wizard World – Magic School Item#WW8778

Die Cuts – Lawn Fawn – Stitched Hillside Borders

Sentiment – Recollections Christmas Noel – Washi Tape

Hope you like it!

Super Cool Pals


Hi There! Sharing a Christmas card that I made using “Kraftin’ Kimmie – New Super Cool Pals” stamp set.

Stamped onto Copic Marker X-Press It Blending Card using MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink.

Background snow – Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Background Paper – Creative Memories – Glacier Designer Paper Pack 12 x 12″

Die Cuts – Lawn Fawn – Stitched Hillside Borders

Hope you like it!