Archives

How Ya Bean??

Nov17

Today I’m sharing a card using KLM Digital Design – Coffee Gnome from the new November release. This image also comes with 2 more sentiments, “Your a special blend” and “You are the cream to my …”. I’m personally not a coffee lover, but I do believe this is the perfect image and sentiment to send a little note to a friend.

Hammermill – Premium Cardstock 110 lb. was used to create a 5.5″ x 4.25″ card base. Creative Memories – Hot Fudge paper was die cut to the size of 5.25″ x 4″. Using Tim Holtz Distress Inks – Ground Espresso and a blending brush, I created my own background using the stencil from Coffee Break – Practical Publishing 2017. With a sponge dauber, the edges were also inked all around. The finished background was then applied directly to the card using double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card and coloured in with Copic markers. Both the sentiment and image were then fussy cut all around leaving a small border surrounding them. U-Line Double-Sided Foam tape was applied to both and they were popped up onto the card.

Card Recipe:

Stamp and Sentiment:  Coffee Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Ground Espresso

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Dies: My Creative Time – Rectangle Frame Die Layers – MCT-D274

Stencils: Coffee Break – Practical Publishing 2017

Miscellaneous: U-Line Double-Sided Foam Tape, Cuttlebug, Blending Brush, Dauber

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: C7, C6, C5, C3

Pants, Hat and Shoes: E89, E87, E84

Shirt and Socks: E49, E39, E37, E35

Coffee Sack: E43, E42, E41, E37, E19, E18, E17, E15, E13

Coffee Cup: E43, E42, E41, E19, E18, E17

Shadow: C3, C2, C1, C0

Sentiment: E40

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Bookworm Gnome!

Oct24

Today I’m sharing a couple of very simple bookmarks using KLM Digital Design – Bookworm Gnome from the new October 2023 release. This image also comes with 1 more sentiment, “A book a day keeps reality away” besides the 2 I’m showing here.

The images and sentiments were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card cardstock and coloured in with Copic markers.

 

I made one image slightly smaller than the other one and then to cut them both out, I used my Cuttlebug and die cut from Art Impressions – 5223 – Bookmark Dies. They are both ready now to laminate and to add tassels to before I give them away to a happy reader.

Card Recipe:

Stamp and Sentiment:  Bookworm Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Dies: Art Impressions – 5223 – Bookmark Dies

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E47, E44, E43, E41

Hat: R46, R14, R08

Shirt: B26, B23, B21

Books Pages: E50, E31, E30

Books: B05, B04, B02, YG67, YG63, YG61, BG57, BG32, BG11, V27, V22, V20

Desk: E29, E25, E23

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Sweetest Wishes!!

Oct13

Today, I’m sharing a Christmas card from the new KLM Designs October release called Christmas Bunny – Candy Cane.  This stamp set also comes with 2 other sentiments, “Wishing you a December full of candy cane wishes and mistletoe kisses” and “All I want for Christmas is my two front teeth”.

To make the card, I first imported the image and sentiment into Microsoft Word and printed everything out onto Copic Marker X-Press It Blending Card using my HP Printer. Using my Cuttlebug and Creative Expressions – Festive Collection Peeking Snowflake dies, I die cut around the image and at the same time, die cut a larger oval out of Recollections – Silver Foil Cardstock from the same die set. The image was coloured in with Copic markers. Gelly Roll Sakura #10 Pen was used to create the snow in the sky and also to add some highlights to the eyes. For the snow surrounding the bunny on the ground, Cosmic Shimmer Fluffy Stuff was applied and then I added in some glitter while it was still wet. Then snow was heated from the bottom of the image and then on top using a Marvy Uchida – Embossing Heat Tool to puff it up. Stickles – Diamond was then applied to add in some more glitter. Stickles – Diamond was also applied to the hat brim and pompom.

The sentiment frame was die cut with my Cuttlebug and My Creative Time – Stitched Zig Zag Ties. The sentiment was cut to the size of 2.5″ x 7/8″ and then using a We R Memory Keepers – Crop-A-Dile Corner Chomper, I used the 1/8″ corner. With a B000 Copic marker, I applied it over the entire sentiment piece to give it a hint of colour. The image and the sentiment were attached to the Silver die cuts using U-Line Double-Sided foam tape. Creative Expressions – Festive Collection – Pearly Snowflake Border was used to die cut the snowflakes out of Lawn Fawn – Sparkle Cardstock in “Pixie Dust”.

The card was now ready to assemble. I cut the base card from Hammermill – Premium Colour 100 lb. cardstock to the size of 9″ x 8″ and then scored it at 4″ and folded it in half. Reminisce Snowflake Ridge – Snow Day paper was cut to 9″ x 4″ and applied to the base card using double-sided tape. Liquid glue was applied to the back of the snowflake border and it was attached to the top of the card. Double-sided tape was added to the silver oval and sentiment border and they were both applied directly to the base of the card. Lastly, I added in some sparkle dots from Your Next Stamp and inked around the entire card with a finger dauber and Tim Holtz Distress Ink – Blueprint Sketch.

Card Recipe:

Stamp and Sentiments: Christmas Bunny – Candy Cane (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Blueprint Sketch

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Reminisce Snowflake Ridge – Snow Day, Recollections – Silver Foil Cardstock (8.5″ x 11″)

Dies: Creative Expressions – Festive Collection Peeking Snowflake, Creative Expressions – Festive Collection – Pearly Snowflake Border, My Creative Time – Stitched Zig Zag Ties

Miscellaneous: Marvy Uchida – Embossing Heat Tool, U-Line Double-Sided foam tape, Stickles – Diamond, Your Next Stamp – Sparkle dots.

Image coloured with Copic Markers:

Bunny: E33, E31, E30, C1, C0, R46, R30, R14, R08, R02, E25, E23, Y17, 100, C1, C00, Gelly Roll Sakura #10 Pen

Hat, Holly and Berries: R59, R37, R35, BG96, G99, G94, G82, C1, Stickles – Diamond

Candy Cane: R46, R14, R08, C1, C00

Sky: B06, B05, B04, B02

Snow: Stickles – Diamond, Cosmic Shimmer Fluffy Stuff

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Dino-Mite Holiday!!

Oct5

Today, I’m sharing a Christmas card from the new KLM Designs October release called Christmas Dinosaur.  This stamp set also comes with 1 other sentiment, “Merry Christmas”. Christmas is coming soon and Dino is all set with his Christmas lights, hat and songs for the season!

To make the card, I first imported the image and sentiment into Microsoft Word. I sized both the image and sentiments to fit 5.5″ x 4.25″ and printed everything out onto Copic Marker X-Press It Blending Card using my HP Printer. The image was coloured in with Copic markers. Gelly Roll Sakura #10 Pen was used to create the snow in the sky and Pink & Main – Touch of Gloss was added to the lights. I added some Stickles – Diamond to the bumps to make them look like gum drops and also the brim of the hat and pompom. Dino likes to be festive. LOL! Lastly, a mixture of Stickles – Icicle and Stickles – Diamond were added to create the glitter in the snow. Once all of the Stickles was dry, I cut the image to the same size as the base and used double-sided tape to adhere the 2 pieces together.

Card Recipe:

Stamp and Sentiments: Christmas Dinosaur (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Gelly Roll Sakura #10 Pen, Pink & Main – Touch of Gloss

Image coloured with Copic Markers:

Dinosaur: YG97, YG95, YG67, YG63, YG61, G85, G82, E89, E87, E84, R27, R22, R20, R24

Hat, Holly and Berries: R59, R37, R35, BG96, G99, G94, G82, C1

Dinosaur Bumps and Lights: B52, B26, B24, Y17, Y04, Y00, YG05, YG03, YG01, R46, R14, R08, Pink & Main – Touch of Gloss, Stickles – Diamond

Sky: B04, B02, B01, B00, B000

Snowy: Stickles – Icicle

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Graveyard Gnome – Witch!

Sep28

Today I’m sharing a Hallowe’en card using KLM Digital Design – Graveyard Gnome – Witch from the new September 2023 release. This image also comes with 2 more sentiments, “You totally rock, Ghoulfriend!” and “If the broom fits…”.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 4.25″ x 5.5″ card base. Craft Consortium – Ink Drops Vivid Craft Papers was cut to the same size as the base. With my Cuttlebug and PhotoPlay – Say It With Stamps – #6 Haunted House Coverplate Die, I die cut the haunted house out of Recollections – Black cardstock and then cut along the bottom of the fence. I traced the fence bottom onto another piece of Recollections – Black cardstock and fussy cut it. The 2 pieces were then glued together. With some scraps of yellow cardstock, I cut out a few pieces and glued them to the back of the house. The entire house and base were attached to the  Vivid Paper background with glue.  Now that the pieces were assembled, I adhered the finished background directly to the base using double-sided tape. Lastly, the top edges were inked with Tim Holtz Distress Ink – Black Soot and a finger dauber. The moon was also cut out using the same die cut set from Copic Marker X-Press It Blending Card.

The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card cardstock and the sentiment onto Recollections – Purple Passions cardstock. The image and the moon were coloured in with Copic markers. I fussy cut the image and then used a black marker to go around all of the edges. With U-Line Double-Sided Foam tape, the image and moon were attached to the front of the card. The sentiment piece was cut to the size of 4″ x 5.25″ and it was adhered to the inside of the card using double-sided tape. Lastly, to finish the card off, I added in 3 little bats onto the front of the card and 2 shoes on the inside using Stampendous – class a’peel stickers – Cats & Bats Black.

Card Recipe:

Stamp and Sentiment:  Graveyard Gnome – Witch – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Black Soot

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock, Craft Consortium – Ink Drops Vivid Craft Papers, Yellow cardstock, Recollections – Purple Passions 8.5″ x 11″

Dies: PhotoPlay – Say It With Stamps – #6 Haunted House Coverplate Die

Miscellaneous: Stampendous – class a’peel stickers – Cats & Bats Black (AC969K), U-Line Double-Sided Foam tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Hair: C9, C7, C5, B41

Hat, Dress: V09, V06, V04, C9, C7, C5, Y38, Y35, Y32

Pumpkin: YR68, YR31, YR18, Y38, YG67

Gravestone: C9, C5, C3, C1

Leaves: E15, E13, E11, R05, R02, Y15, YG07, YG01, YR20, YR14, YR12, Y02

Moon: E41, E40, Y11, Y000, BV20, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Graveyard Gnome – Vampire!

Sep20

Today I’m sharing a Hallowe’en card using KLM Digital Design – Graveyard Gnome – Vampire from the new September 2023 release. This image also comes with 2 more sentiments, “Can’t wait to hang with our fang gang!” and “Happy Halloween, My creepy little friend”.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.25″ x 5.5″ card base. Recollections – Black cardstock was cut to the same size and adhered directly to the base using double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card cardstock. I printed out an extra copy of the image onto regular copy paper as well and fussy cut around it so that I could use it as a mask for later. I also cut a 2″ circle from a piece of Post-It Note so that I could use both pieces as a mask.

The image was coloured in with Copic markers. With the reverse mask from the circle, I placed it over top of the image and drew in the moon, using the mask as a guide. I added in the features of the moon with Copic markers and then blended everything together with a Copic Colorless Blender. I was now ready to do my background.

I took the mask that I created earlier of the image and placed it over top of the coloured image. Next, I tood the circle that I created from the Post-It Note and placed it over top of the image mask. This allowed me to cover both the moon and the image. With Washi Tape, I covered the bottom part above the sentiment. With multiple blending brushes and Tim Holtz Distress Inks listed below, I created the glow of the moon and the sky. Tim Holtz Distress Ink – Carved Pumpkin and Tim Holtz Distress Ink – Spiced Marmalade were combined to turn the sentiment orange. Once this was completed I moved the Washi Tape so that it covered the sentiment. This time, I blended in the green Tim Holtz Distress Inks with a blending brush. I decided I wanted a little more depth to the greens, so I removed all of the masks, but kept the Washi Tape on.  Using  Copic markers, I created a few more shadows in the grass.

I removed the Washi Tape and attached the finished image to the base card.  Some extra bats in the sky were added using Class A’ Peel Stickers from Stampendous! Crystal Stickles was applied to the small moon on the hat and the hat band. Finally, some little stars were added into the sky using a White PrismaColor Premiere Pencil to complete the card.

Card Recipe:

Stamp and Sentiment:  Graveyard Gnome – Vampire – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Fossilized Amber, Carved Pumpkin, Spiced Marmalade, Villainous Potion, Dusty Concord, Chipped Sapphire, Mowed Lawn, Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock

Miscellaneous: Blending Brushes

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E47, E44, E43, E41

Hat, Cape and Small Moon: V17, V15, V12, Y17, Y15, Y11, R59, R37, R35

Bat: BV29, BV25, BV23

Gravestone: W5, W3, W1, W0

Leaves: YR27, YR24, YR23, YR15, YR12, Y17, Y04, R39, R02,

Grass: YG25, YG23, YG17, YG13, YG03

Moon: E41, E40, Y11, Y000, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Dinosaur Pilgrim!!

Sep14

Hi Everyone, I took most of the summer off to enjoy the beautiful weather and also to visit family, so I didn’t make a lot of cards. But, now I’m back and ready to start sharing some weekly creations with all of you!

Today, I’m sharing a Thanksgiving card from the new KLM Designs September release called Dinosaur Pilgrim.  He’s loving the fall colours and is sending everyone some special wishes! This stamp set also comes with 2 other sentiments, “Autumn Blessings” and “Happy Thanksgiving”.

To make the card, I first imported the image and sentiment into Microsoft Word. I sized both the image and sentiment to fit 5.5″ x 4.25″ and printed everything out onto Copic Marker X-Press It Blending Card using my HP Printer. The image was coloured in with Copic markers. Gelly Roll Sakura #8 Pen was used to create the whites of the eyes. I drew in the tree and leaves on the tree and added in the sky and background. A Black PrismaColor pencil was used to go around the entire image of the Dinosaur, pumpkin and leaves on the ground to make them stand out more. I fussy cut around the sentiment and ran both pieces through a Xyron Create a Sticker and attached 1 piece to some orange and the other to some green scrap cardstock that I had. Scrapbook Adhesives 3D Foam Strips were added to the back of the sentiments and they were both popped up onto card.

Card Recipe:

Stamp and Sentiments: Dinosaur Pilgrim (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Image coloured with Copic Markers:

Dinosaur: YG97, YG95, YG67, YG63, YG61, G85, G82, E89, E87, E84, R27, R22, R20, R24, Y08, YR12, Gelly Roll Sakura #8 Pen

Hat: C10, C7, C5, C3, C1, Y17

Collar: C1, C00, Colorless Blender

Pumpkin: E08, YR18, YR16, YR14, YR12, G05, G02

Leaves: E99, E98, , E95, E08, R05, G07, G05, G02, Y08

Grass: YG13, YG11, YG03, YG01

Trees and Leaves: E35, E34, E27, E25, E23, YG25, R24, R05, Y17, Y08, YR12

Sky: B02, B01, B00, B000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

 

Hero Dad!

May5

Today I’m sharing a Father’s Day card using KLM Digital Design – Wheelbarrow Gnome from the new April 2023 release. This image also comes with 2 more sentiments, “Dad, you’re someone to look up to no matter how tall I grow!” and “Any man can be a Father, but it takes someone special to be a Dad”. I know that my dad will always be my hero no matter how old I get. 🙂

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 5.5″ card base. Using my Cuttlebug and My Creative Time -Stitched Squares Inside and Out dies, I die cut a 5″ x 5″ square out of Recollections – Black cardstock and a 4″ x 4″ square out of Copic Marker X-Press It Blending Card. The black square was applied directly to the base card using double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card prior to me cutting out the 4″ square. The image was coloured in with Copic markers. I decided I wanted some puffy clouds, so I printed out the image again, but this time it was printed onto regular copy paper and then I fussy cut around the top part of it. It was placed over top of the coloured image with some washi tape to secure it in place. I took another piece of paper and created a wavy background and placed that down over the image too! Then, with Tim Holtz Distress Ink – Salty Ocean and a blender brush, I proceeded to create the cloudy sky using a stencil that I had made earlier using Avery Elle – Pierced Clouds Dies. Once the sky was complete, I added in the dirt path and the farm field to finish off the image. U-Line double-sided tape was added to the back of the completed coloured image and it was popped up onto card to finish it off.

Card Recipe:

Stamp and Sentiment:  Wheelbarrow Gnome – KLM Digital Designs

Inks: HP Printer Grayscale. Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock

Dies: My Creative Time -Stitched Squares Inside and Out, Avery Elle – Pierced Clouds Die (D-05-01)

Miscellaneous: U-Line double-sided tape, Cuttlebug, Blending Brush

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard: E29, E27, E25, E23

Hats and Boots: C8, C6, C4, C2

Shirts: BG72, BG57, BG32, BG11

Jeans: B26, B23, B21, E23

WheelBarrow: C10, C8, C6, C3, C2, C1, R56, R37, R35, E29, E25, E23

Lawn \ Farm Field: YG25, YG23, YG21, YG17, YG13, YG03, YG01

Dirt Path: E37, E35, E33, E31

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

The Best Therapist!

Apr25

Today is Tuesday and I’m sharing an Inspirational card using KLM Digital Design – Gnomes Best Friend from the new April 2023 release. This image also comes with 2 more sentiments, “Thinking of You” and “Just Smile”. Pets make the perfect companions because they will always listen and never judge you. They sense when you are happy or sad and always make you feel wonderful! Also, your secrets are always safe with them! 🙂

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. Scrapbook.com – Roses Smooth Cardstock – 5.5″ x 4.25″ was applied directly to the base card using double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. With my Cuttlebug, I die cut the image using My Creative Time – Rectangle Frame Layers to the size of 4.75″ x 3.5″. The image was coloured in with Copic Markers listed below. Some small clouds were die-cut using Lawn Fawn – Platform Pop-Up Inserts and coloured in with Copic Markers. I applied these to the coloured image with liquid glue. U-Line double-sided tape was added to the back of the completed coloured image and it popped it up onto card.

Card Recipe:

Stamp and Sentiment:  Gnomes Best Friend – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Roses Smooth Cardstock – 4.25″ x 5.5″

Dies: My Creative Time – Rectangle Frame Layers, Lawn Fawn – Platform Pop-Up Inserts

Miscellaneous: U-Line double-sided tape, Cuttlebug,

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E29, E27, E25, E23

Hat: R59, R37, R35

Clothing: BG09, BG05, BG02, BG01

Jeans: B26, B23, B21

Dog: E99, E97, E25, E23, E13, E11, E07, Y38, 100, R02, R00

Lawn: YG25, YG23, YG21, YG03, YG01

Sky: B02, B01, B00, B000

Clouds: C1, C00, B60

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

American Flag Gnome

Apr5

Today is Thursday and I’m sharing an American Celebration card using KLM Digital Design – American Flag Gnome from the new April 2023 release. This image also comes with 2 more sentiments, “Let Freedom Ring” and “Home of The Brave – America”.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I found some navy blue cardstock with stars from my scrap stash and thought it went perfect with this card. I cut it to be the same size as the base and adhered it directly to base card. Tim Holtz Distress Ink – Chipped Sapphire and a finger dauber were used to ink around all of the edges of the card.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card and 1 extra copy of the image was printed onto plain copy paper to be used for masking later. With my Cuttlebug, I die cut the image using My Creative Time – Rectangle Frame Layers. The image was coloured in with Copic Markers listed below. I fussy cut around the image that I had cut out from the plain copy paper and adhered it to the card with some Washi tape as a mask.

Using a blender brush, I created the clouds in the sky with Avery Elle – Pierced Clouds Die (D-05-01) which I had die cut to create stencils. The lawn was created using a blender brush, Tim Holtz Distress Ink – Mowed Lawn and Lawn Fawn – Slimline Hillside Stencils. I also used the stencils to be a mask for adding in the pathway using a blender brush and Krafty Kolours – Sandy Shores.

Once all of the background was completed, I removed the mask from the image and created a shadow under the gnome using Copic markers E33, E31 and E30. Some of the hills were made a little bit darker using Copic marker G20.

I added U-Line double-sided tape to the back of the coloured image then popped it up onto card.

Card Recipe:

Stamp and Sentiment:  American Flag Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Salty Ocean, Krafty Kolours – Sandy Shores, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Mowed Lawn

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Dies: My Creative Time – Rectangle Frame Layers, Avery Elle – Pierced Clouds Die (D-05-01)

Stencils: Lawn Fawn – Slimline Hillside Stencils

Miscellaneous: U-Line double-sided tape, Cuttlebug, Blending Brushes

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E29, E27, E25, E23

Hat: R59, R37, R35

Clothing: B39, B37, B29

Boots: E49, E35, E34, E31, C9, C7, C5, C4

Flag: R59, R37, R35, B39, B37, B29

Path: E33, E31, E30 and Krafty Kolours – Sandy Shores for base

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Card of the Month – Round 1 – You Did It!

Apr1

Yippee! I am thrilled to have been asked to enter my card into the Creative Scrapbooker Magazine’s Card of the Month Contest for April! I would love it if you voted for me! Thank you! 🙏🏻 😘💙
Here is the link on Facebook:

https://creativescrapbooker.ca/card-of-the-month-april-2023/?fbclid=IwAR3vXUqlRBglU91NoJldQ6QCgmgcI4C2ORT158UZ-ISyx7rNHNdVTyDo-L0#/bracket/4416181

 

The original post where I created this card can be found here. https://rstevensoncreations.com/2023/03/10/you-did-it/

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Music Speaks!

Mar18

Today I’m sharing a music card using KLM Digital Design – Keyboard Gnome from the new March release. This image also comes with 2 more sentiments, “Turn up the volume close your eyes and let the music take over your soul” and “Music is the voice of the soul”. No words were truer spoken, music is all around us and there is something out there for everyone to listen to!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 5.5″ card base. Anna Griffin – Musical Cardstock & Vellum paper was cut to the same size as the base card. Using a Sharpie – Gold Medium Point – Water Based Paint pen, I inked around all of the edges and then adhered it to the base card with double-sided tape. Recollections – Matte Gold Foil cardstock was die cut 5 times using my Cuttlebug and Joy! Crafts – Cutting and Embossing Dance to the Music die. Using liquid glue, I applied each layer on top of each other and then glued it to the bottom of the card base.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image and fussy cut around it and the sentiment. The edges of the image were inked around with a black marker and the sentiments were adhered onto Recollections – Matte Gold Foil cardstock and then fussy cut again.

The card was now ready to assemble. I added 3M VHB – 2 sided pop-up tape to the backs of the sentiments and image and then popped up all of the pieces onto the card to complete it.

Card Recipe:

Stamp and Sentiment:  Keyboard Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Anna Griffin – Musical Cardstock & Vellum, Recollections – Matte Gold Foil cardstock

Dies: Joy! Crafts – Cutting and Embossing Dance to the Music

Miscellaneous: Cuttlebug, Sharpie – Gold Medium Point – Water Based Paint, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Hair: E15, YR23, Y38, Y21

Dress and Hat: BG09, BG05, BG02, BG01

Ribbon Sash: R46, R14, R08

Shoes: C10, C8, C6, C5, C3, C2, C1, E55, E53, E51

Keyboard Instrument and Stand: R46, R14, R08, C3, C2, C1

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

You Did It!

Mar10

Today I’m sharing a graduation card using KLM Digital Design – Graduation Gnome II from the new March release. This image also comes with 2 more sentiments, “Be the change that you want to see in this world” and “And so the adventure begins”. This little gnome is glowing with pride after graduating and accepting his diploma. Congratulations to all of the new graduates out there this year!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 4.25″ x 5.5″ card base. Recollections – Black cardstock was cut to the size of 4″ x 4-5/8″ and Recollections – Patterned paper was cut to the size of 3″ x 4.25″ using My Creative Time – Rectangle Frame Layers and my Cuttlebug. Using a Sharpie – Gold Medium Point – Water Based Paint pen, I inked around all of the edges of both pieces.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image and fussy cut around it and the sentiment. Both were adhered onto Recollections Black cardstock and then fussy cut again.

The card was now ready to assemble. I added U-Line double-sided pop-up tape to the backs of the sentiment, image and both rectangular pieces. All pieces were then popped up onto card to complete it.

Card Recipe:

Stamp and Sentiment:  Graduation Gnome II – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections Grad Paper, Recollections Black cardstock

Dies: My Creative Time – Rectangle Frame Layers

Miscellaneous: U-Line double-sided tape, Cuttlebug, Sharpie – Gold Medium Point – Water Based Paint, Xyron Create a Sticker

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E29, E27, E25, E23

Gown and Hat: C10, C8, C6, C5, C4

Boots: 100, C10, C8, C6, C5, C4

Scroll: C1, C0

Ribbon and Tassel: YR23, Y15, Y11, Y00

Glow around image: Y00

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Peace Dude!

Mar2

Today I’m sharing an inspirational \ birthday card using KLM Digital Design – Peace Gnome from the new March release. This image also comes with 2 more sentiments, “Peace begins with a smile” and “There is peace even in the storm”. Seeing this image made me feel nostalgic for my younger days in the 60’s and 70’s. I still remember how excited I was to get my very first pair of GWG bell bottom jeans and then LEVIS. LOL! Flower power was all the rage and there were flowers and peace signs everywhere. I was still young, but it was a really cool time to grow up.

AC Cardstock – White was used to create a 6″ x 6″ card base. BasicGrey – Lauderdale Patterned paper was cut to the same size as the base card and adhered with double-sided tape. Tim Holtz Distress Inks – Villainous Potion was used to ink around all of the edges.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card and 2 extra copies of the image were printed onto plain copy paper to be used for masking later. With my Cuttlebug, I die cut the image and the purple background layer using Quickutz Nesting Frame 7 dies. I fussy cut around the sentiment and then inked it very lightly with some purple that I had left on my blending brush. I ran it through my Xyron Create a Sticker and attached it to a scrap piece of Recollections – Purple Passions paper. Once again, I fussy cut around the sentiment. The larger frame and sentiment edges were inked around the edges with the same ink as the base card.

The image was coloured in with Copic Markers listed below. The top portion of the image was fussy cut and I applied some Washi Tape to the back of it to create a hinge and to mask the image. Using blender brushes and multiple Tim Holtz Distress Inks, I created the clouds in the sky with Lawn Fawn Cuts – Cloudy Stencil.

Once I completed the sky, I used second image that I had printed out onto the copy paper for 2 purposes. The first purpose was to use a stylus and tracing paper to transfer the image onto the patterned paper from BasicGrey – Lauderdale Paper Pad for paper piecing the gnome’s shirt. I loved the wild flower pattern and thought it was perfect for this hippie gnome. Once the pattern was transfered, I fussy cut it out. I used my Copic markers to create a small shadow on various parts of the shirt. With a Pigma Micron 03 black marker, I drew the lines in darker so that they would stand out on the shirt and then used a black marker to go around all of the pieces. Once completed, all of the pieces were put through a Xyron Create a Sticker to make it easier to stick to them to the coloured image and also so that they would lay flat. I then added the pieces to the main image.

The printed image was then fussy cut and the sand was added using a blender brush, Krafty Kolours – Sandy Shores for the base and a mixture of Copic markers listed below.

The remainder of the card was now ready to assemble. I added U-Line double-sided tape to the backs of the sentiment, large purple frame and image. They were all then popped up onto card.

Card Recipe:

Stamp and Sentiment:  Peace Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Salty Ocean, Wilted Violet, Aged Mahagony, Abandoned Coral, Kitsch Flamingo, Spiced Marmalade, Mustard Seed, Twisted Citron, Villainous Potion, Krafty Kolours – Sandy Shores

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, BasicGrey – Lauderdale Paper Pad (6″ x 6″), Recollections – Purple Passions 8.5″ x 11″

Dies: Quickutz Nesting Frame 7

Stencils: Lawn Fawn Cuts – Cloudy Stencil

Miscellaneous: U-Line double-sided tape, Cuttlebug, Blending Brushes, Xyron Create a Sticker

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E29, E27, E25, E23, E21

Jeans and Hat: B26, B23, B21

Boots: E49, E35, E34, E31, E29, E27, E25, E23, E21

Shirt: Y17, Y11 (Lauderdale – Basic Grey Designer Paper)

Peace Sign: Y19, Y15, Y11

Sand: E37, E35, E34, E33, E31, E30 and Krafty Kolours – Sandy Shores for base

Glasses: N10, N9, N7, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Do Not Stop!

Feb26

Today I’m sharing an inspirational card using KLM Digital Design – Slow Ride Gnome from the new February release. This image also comes with 2 more sentiments, “Travel at your own pace” and “Life is a journey, not a race”.  It was hard for me to pick which sentiment to use as I loved them all. They are all so true to life.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I had found Crafts Designer Paper – 02-3080678 at Dollarama and thought this paper was perfect for this card. It was cut to the same size as the base card and adhered with double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. With my Cuttlebug, I die cut the image using My Creative Time – Bunch of Fun Circle 3.25″ Dies. The larger circle was die cut using Recollections – Blue Ombre Cardstock and Lifestyle Crafts Cutting Dies – Nesting 3.5″ Circle. I trimmed down the sentiment to be 2.25″ x 1.5″. Using what was left on a blending brush that I used for blues, I lightly went over the paper to give it a light blue hue. Tim Holtz Distress Ink – Salvaged Patina was then inked around the 3 edges.

The image was coloured in with Copic Markers listed below. I printed out another copy of the image onto plain paper and fussy cut around the top portion. I applied some Washi Tape to the back of it to create a hinge and to mask the image. Using a blender brush, Tim Holtz Distress Ink – Salty Ocean and Lawn Fawn Cuts – Cloudy Stencil, I created the clouds in the sky.

For the assembly of the card, I added double-sided tape to the back of the sentiment and adhered it directly to the card. U-Line double-sided tape was added to the backs of the larger and smaller circle and both were popped up onto each other and the card. Lastly, to finish off everything, I added in some YNS Gumdrops – Tropical Paradise.

Card Recipe:

Stamp and Sentiment:  Slow Ride Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Salvaged Patina

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafts Designer Paper – 02-3080678, Recollections – Blue Ombre Cardstock

Dies: My Creative Time – Bunch of Fun Circle Dies, Lifestyle Crafts Cutting Dies – Nesting Circles

Stencils: Lawn Fawn Cuts – Cloudy Stencil

Miscellaneous: U-Line double-sided tape, Cuttlebug, Blending Brush, YNS Gumdrops – Tropical Paradise

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E08, YR18, YR16, YR12

Jeans: B26, B23, B21

Shoes: C9, C7, C5, C1

Shirt: B69, B63, C3, R46

Hat: BG09, BG05, BG02, BG01

Turtle: E47, E44, E43, E42, E40, BG99, BG96, BG93, BG90, G07, YG07, Y35, C1, C00, 100

Sand: E37, E35, E33, E31

Flower and Stem: G14, YG23, YG11, E33, Y38, Y35, Y32

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Sending You Love!!

Feb19

So happy to be colouring and creating again. I went away on a Southern Caribbean cruise at the beginning of the month and unfortunately, 3 days after being back ended up very sick with Covid. My husband was sick as well, even though we have both had all of our shots and 2 boosters. I’m so glad that we had our shots though, as I would never like to see what we would have gone through, had we not had the shots. We’re both slowly still recovering, but have a little more energy these days. We are still planning our next vacation though, as life must go on. LOL! On a good note, we did meet some really nice people on our voyage and one of them was even an international best selling author and his wife was wonderful too! Wow! How amazing is that? We were so blessed that he sent us two of his books, which I am really enjoying. I’m a little late in showcasing my cards for February, but hopefully, you’ll be seeing a lot more from me in the next little while!

*************

Today I’m sharing a special card using KLM Digital Design – Valentine Gnome II from the new February release. I was a little late for Valentine’s Day, but I found this sentiment and thought it went perfect with this image.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I taped off the bottom half at 4.25″ from the top of the card with some Post-It Note tape. Using a blending brush and Tim Holtz Distress Inks – Festive Berries, I inked the whole top of the card. I taped Kraftin’ Kimmie – Happy Hearts Stencil on top of the inked portion of the base card and with a blending brush and Tim Holtz Distress Inks – Candied Apple, stenciled in the hearts. With the stencil remaining in place, using a spatula and Nuvo Glimmer Paste – Moonstone, I added glitter to the hearts and set the card aside to for the paste to dry.

The main image was brought into Microsoft Word and sized to approximately 3.75″ x 3″. It was printed out onto Copic Marker X-Press It Blending Card and coloured in with Copic markers. This was then fussy cut leaving a thin border around it. I used a C1 Copic marker to go around the entire image so that it wasn’t pure white. The sentiment was stamped onto Hammermill – Premium Colour 100 lb. cardstock using my MISTI and Sending Love Cubbies Stamp by Art Impressions using Memento – Lady Bug ink. With the Cuttlebug, the sentiment was cut out using Poppystamps – Christmas Quotes dies. Penny Black – Graceful Stackers dies were also used to cut out a scrap piece of Recollections – Matte Gold Foil cardstock at the same time. Using the same blending brush, I brushed around the edges of the sentiment die cut to give it some extra colour. I cut a small piece of red cardstock to the size of 3/8″ x 4.25″ and ran it through a Xyron Create a Sticker and applied it to the card to break up the joining between the stenciled background and white background.

The rest of the card was now ready to assemble. I applied U-Line double-side tape to the backs of the coloured image, sentiment and gold frame. I added some liquid glue to the tape behind the image to make it stick better to the background with the paste and popped it up onto the card. The sentiment and frame were both popped up onto the card below the coloured image and to finish everything off, Doodlebug Design Inc. – Shape Sprinkles – Love This! hearts were added.

Card Recipe:

Stamp:  Valentine Gnome II – KLM Digital Designs

Sentiment: Sending Love Cubbies – Art Impressions

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Festive Berries, Tim Holtz Distress Inks – Candied Apple, Memento – Lady Bug

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Matte Gold Foil cardstock

Stencil: Kraftin’ Kimmie – Happy Hearts Stencil

Dies: Poppystamps – Christmas Quotes, Penny Black – Graceful Stackers (51-658)

Paste: Nuvo Glimmer Paste – Moonstone

Miscellaneous: U-Line double-sided tape, Cuttlebug, Xyron Create a Sticker, Doodlebug Design Inc. – Shape Sprinkles – Love This!

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E08, YR18, YR16, YR12

Shirt: B37, B14, B12

Hat, Pants and Shoes: R59, R37, R35, R24

Stockings: B37, B14, B12, R37

Chocolates: R59, R37, R35, E49, E47, E37, E35, E34, E29, E27, E25, E23

Bowl: C2, C1, C0, C00, B000, Colorless Blender

Letter: C2, C1, C0, R35, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Fido – Love You

Jan25

It’s Wednesday, and today I’m sharing a card I made using KLM Digital Design –  Fido – Love You from the new January 2023 release. Our pets always give us unconditional love and they make the best companions to talk to, play with and just cuddle with with when we need a big hug!

To make my card this week, I started with a 7.25″ x 3.5″ card base using Hammermill – Premium Colour 100 lb. cardstock. Recollections – Burgundy was cut to the size of 7.25″ x 3.5″ and adhered directly to the card. Using my Cuttlebug and My Creative Time – Tall Paw Frame Dies, I die cut Martha Stewart Crafts – Enchanted Woodland paper and the little bone using scraps of brown and black cardstock. Tim Holtz Distress Inks – Festive Berries and a blending brush were used to ink around the edges of the large die cut. This was popped up onto the base using U-Line Double-Sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The paper was cut to be 5-5/8″ x 2-5/8″ and everything was coloured in. U-Line Double-Sided tape was added to this and it was popped up onto the die cut. I ran the bone die cuts through my Xyron Create a Sticker and attached them to the card to finish it off.

Card Recipe:

Stamp and Sentiment:  Fido – Love You – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Festive Berries

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Martha Stewart Crafts – Enchanted Woodland 12″ x 12″, Recollections – Burgundy

Die Cuts: My Creative Time – Tall Paw Frame Dies

Miscellaneous: 2 sided tape, Cuttlebug, Xyron Create a Sticker, U-Line Double-Sided tape

Image coloured with Copic Markers:

Letters: R46, R14, R08

Dog: E55, E53, E51, E50, E49, E47, E29, E27, E25, E23, R30, R29, R02, R00

Sky and Clouds: BG70, C1, B02, B01, B00, B000, Colorless Blender

Grass: YG23, YG09, YG05, YG03, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Make Lemonade!

Jan21

Today I’m sharing an inspirational card using KLM Digital Design – Lemon Gnome from the new January release. This image also comes with 2 more sentiments, “I could just Squeeze you!” and “Squeeze the day”.  I’ve always loved lemons and they are good for so many different things, baking, tea and they are high in Vitamin C, just to name a few.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I had found Crafts Designer Paper – 02-3093268 at Dollarama and thought this paper was perfect for this card. I chose 2 patterns from this paper pack and cut the darker pattern to the size of 5.25″ x 2.25″ and the other piece to the size of 5.25″ x 2.75″. Two rectangles were cut out of Recollections – Black cardstock to the size of 5.5″ x 2.75″ and 5.5″ x 3″. With yellow cardstock and my Cuttlebug, I die cut the large oval using Waffle Flower – Additional Oval dies and the larger circle with Lifestyle Crafts Cutting Dies – Nesting Circles. All of the edges for the patterned pieces and the yellow die cuts were inked with Tim Holtz Distress Ink – Mustard Seed.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. With my Cuttlebug, I die cut the large oval using Waffle Flower – Additional Oval dies and the smaller circle with My Creative Time – Bunch of Fun Circle Dies. Tim Holtz Distress Ink – Squeezed Lemonade was applied to the outer edges of the smaller circle. The image was coloured in with Copic markers.

For the assembly of the card, I applied the 2 patterned pieces together with the black cardstock using double sided tape. I placed the colourful piece down first onto the base card and then the second piece was applied over top of that one. Both were adhered with double-sided tape. The image and the sentiment were both popped up onto the larger oval and larger circle using U-Line Double-Sided tape. I applied U-Line Double-Sided tape to the backs of these combined pieces and then popped them both up onto the card. Finally, I added in some YNS Gumdrops – Tropical Paradise around the sentiment to complete the card.

Card Recipe:

Stamp and Sentiment:  Lemon Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Mustard Seed, Tim Holtz Distress Ink – Squeezed Lemonade

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock, Crafts Designer Paper – 02-3093268 (6″ x 6″), Yellow Cardstock

Dies: My Creative Time – Bunch of Fun Circle Dies, Waffle Flower – Additional Oval dies, Lifestyle Crafts Cutting Dies – Nesting Circles

Miscellaneous: U-Line double-sided tape, Cuttlebug, YNS Gumdrops – Tropical Paradise

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E08, YR18, YR16, YR12

Jeans: B26, B23, B21

Shoes: EEE, E31, E30. E29, E27, E25, E23

Shirt: BG72, BG54, BG32, BG11

Hat: R46, R14, R08

Lemons, Straw and Lemonade: Y17, Y15, Y13, Y11, Y000

Basket: YR24, YR23, YR21, Y32

Sky: B04, B02, B01, B00

Clouds: B60, C1, Colorless Blender

Grass: G14, YG23, YG13, YG11

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

3 Stooges!

Jan18

It’s Wednesday and today I’m sharing a birthday card using KLM Digital Design – Three Stooges Gnome from the new January release. This image also comes with 2 more sentiments, “Just relax and except the crazy” and “Make time for yourself”. I grew up watching “The 3 Stooges” and if these gnomes are anything like they were, you never know what’s going to happen. LOL!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 5.5″ card base. I cut Echo Park – It’s Your Birthday (6″x6″ Double-Sided) designer paper to be the same size and adhered it to the base using double-sided tape. The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The printed image and Echo Park – It’s Your Birthday designer paper were both die cut using my Cuttlebug and Whimsy – Wavy Stitched Squares Die Set. I inked around the designer paper with Tim Holtz Distress Inks – Black Soot and popped it onto the base using U-Line double-sided tape. Tim Holtz Distress Ink – Spiced Marmalade was applied around all of the outer edges of the card.  The main image was coloured in with the Copic markers listed below and then popped up onto the centre of the designer paper with U-Line double sided tape. The sentiments were fussy cut and Tim Holtz Distress Ink – Spiced Marmalade was applied around the edges. I wanted the larger sentiment to stand out a little more, so I first ran it through my Xyron Create a Sticker and then adhered it to a scrap piece of Recollections – Black cardstock. I fussy cut around it again and then applied U-Line double-sided tape to both sentiments with double layers on portions of them and popped them up onto the card. Lastly, I used my Quickie Glue pen to trace around some of the spirals and dots on both designer papers and applied Martha Stewart Crafts Glitter – Crystal Fine to give it some sparkle.

Card Recipe:

Stamp and Sentiment:  Three Stooges Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Black Soot, Tim Holtz Distress Ink – Spiced Marmalade

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park – It’s Your Birthday (6″x6″ Double-Sided), Recollections – Black cardstock

Dies: Whimsy – Wavy Stitched Squares Die Set (WSD371)

Miscellaneous: U-Line double-sided tape, Cuttlebug, Xyron Create a Sticker, Martha Stewart Crafts Glitter – Crystal Fine

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beards: E08, YR18, YR16, YR12

Jeans: B26, B23, B21

Shoes: C9, C7, C5

Shirts: BG72, BG54, BG32, BG11, V17, V15, V12, E89, E87, E84, E81

Belt: W9, W7, W5, E15, YR27, YR23, Y08

Shoes: C9, C7, C5, C3

Hats: R46, R14, R08

Rose: E15, Y19, Y17, Y08

Dandelion: Y15, G99, YG67, YG17, G21

Butterfly: Y15, B99, B66, B52, B14, UNI Posca Pen – Light Blue

Sky: B02, B01, B00, B000

Grass: G14, YG23, YG11

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Everything is Magical!

Dec15

Sharing a Christmas card that I made today using KLM Digital Design – Sledding Gnome from the new December 2022 release. This image also comes with 2 more sentiments, “Some people are worth melting for” and “Walking in a Winter WONDERLAND”.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut Lawn Fawn – Let It Shine Snowflakes designer paper to be the same size and adhered it to the base using double-sided tape. The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The printed image was die cut using my Cuttlebug and Die-namics – MFT – Stitched Rec Scallop Frame dies. It was coloured in and then I applied Cosmic Shimmer Fluffy Stuff. DecoArt Glamour Dust was sprinkled over top while it was still wet and then it was heat set with a Marvy Uchida – Embossing Heat Tool to puff up the snow. I applied the snow flakes in the sky using a UNIPosca PC-3M White marker and snow on the ground with Stickles – Diamond in between and on top of the fluffy snow. U-Line double-sided tape was applied to the image after the Stickles was dry and it was popped up onto the base.

Card Recipe:

Stamp and Sentiment:  Sledding Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Let It Shine Snowflakes (6″ x 6″)

Dies: Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860

Miscellaneous: U-Line double-sided tape, Stickles – Diamond, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust, Marvy Uchida – Embossing Heat Tool, UNIPosca PC-3M White marker

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard: E47, E44, E43, E41

Hat and Mittens: BG72, BG57, BG32, BG11

Jeans: B26, B23, B21

Shoes: C9, C7, C5

Shirt: R46, R14, R08

Sled: E39, E37, E35, E34, E31, E30,  C5, C3, C1

Holly: BG99, YG17, YG03, R46

Sky: B02, B01, B00, B000

Snow: BV20, B000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.