Tag Archive | Sharpie – Gold Medium Point – Water Based Paint

Gina K Designs – Owls – Merry Christmas!

Dec13

Today I’m sharing another Christmas card using stamps from  Gina K Designs – Holiday Season and Seasonal Patterns and Phrases. Also used, Ornate Frame die from the new Gina K Designs – 12 Days of Christmas Box – Day 1.

To create the card, I began with the card base using Hammermill – Premium Colour 100 lb. folded to the size of 4.25″ x 5.5″. The edges around the card were inked with a Gina K. blending brush and Gina K. Designs – Powder Blue ink.

With Memento – Tuxedo Black ink and my MISTI, I stamped the image onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers listed below. The image was fussy cut, leaving a touch of white all around it. Using a Sakura Glaze – Black pen, I coloured in the eyes and beaks. Then I added a little dot on the eyes with a Gelly Roll Sakura #5 Pen. Spectrum Noir – Sparkles – Crystal Clear was applied to the hats brims and pom-poms to add a little bit of glitter.

The sentiment was stamped directly onto Hammermill – Premium Colour 100 lb. cardstock, using a MISTI, VersaMark ink and Ranger Gold Embossing powder was applied over top of it. This was heat embossed using a Marvy Uchida – Embossing Heat Tool. The sentiment was die cut using a Cuttlebug and die from Gina K. Designs – Die – Scrolled Gift Card Holder and the frame was die cut using Gina K. Designs – Ornate Frame (Day 1 from the 12 Days of Christmas) and paper from Chloe’s Crafts Paper Pad – 02-3129420. A Sharpie – Gold Medium Point – Water Based Paint was used to create a border around the sentiment die cut.

To assemble the card, using another piece of cardstock from the Chloe’s Crafts Paper Pad – 02-3129420, I cut the paper to the size of 3.5″ x 4.75″ and glued this piece to the Ornate Frame die cut. U-Line Double-Sided Foam tape was applied to the backs of this, the Owls images, sentiment and Dress It Up – Glitter Holly embellishment. The frame was then popped up onto the base card. Next, I popped up the owls, holly and sentiment onto the frame. With a Gelly Roll Sakura #10 Pen, I created snow in the sky behind the owls and onto the holly berries to finish it off.

Card Recipe:

Stamps and Sentiment: Gina K Designs – Holiday Season, Seasonal Patterns and Phrases

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Gina K. Designs – Powder Blue, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Chloe’s Crafts Paper Pad – 02-3129420 (6″ x 6″)

Dies: Gina K. Designs – Die – Scrolled Gift Card Holder, Gina K. Designs – Ornate Frame (Day 1 – 12 Days of Christmas)

Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, , Marvy Uchida – Embossing Heat Tool, Spectrum Noir – Sparkles – Crystal Clear, Dress It Up – Glitter Holly, Ranger Gold Embossing powder, Sharpie – Gold Medium Point – Water Based Paint, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black pen

Image coloured with Copic Markers:

Owls: R30, R22, E29, E27, E25, E23, E39, E37, E35, E33, (Eyes and Beaks – Gelly Roll Sakura #5 Pen, Sakura Glaze – Black pen)

Hats: R59, R37, R35, C4, Spectrum Noir – Sparkles – Crystal Clear

Antlers: E43, E41, E40

Hope you like it and have a great week!

Kit and Clowder – Penguin Bauble!

Dec5

Today I’m sharing a Christmas card that I made following a video for the Penguin Bauble Colouring class by Alyce Keegan at Kit and Clowder during the November Summit Class.

The image provided by Alyce was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers. Once I finished colouring the image, it was fussy cut leaving a slim border. The sentiment was stamped onto some white cardstock in my stash using VersaFine – Majestic Blue ink, MISTI and Kraftin’ Kimmie – It’s Penguining To Look A Lot Like Christmas!  stamp. Ranger – Clear Super Fine Detail embossing powder was applied over top of the ink and it was heat embossed with a Marvy Uchida – Embossing Heat Tool. Lastly, I used a Sharpie – Gold Medium Point – Water Based Paint pen to go around the edges.

The base card was created to the size of 6″ x 6″ out of Hammermill – Premium 110 lb. cardstock. Gold cardstock from Chloe’s Crafts Paper Pad was applied directly to the base of the same size using liquid glue. Waffle Flower Crafts – Nesting Squares were used to die-cut Crafter’s Companion – Snowflake Swirls designer paper for the background and Moonstone – Hunkydory – Vintage Filigree Frame die was used to die cut Chloe’s Crafts Paper Pad – Navy Blue paper. I applied both of these directly to the the front of the card using liquid glue and then popped up the finished image and sentiment onto the card using U-Line double-sided foam tape.

Below is the original coloured image before creating the card to go with it.

Card Recipe:

Stamp: Kit and Clowder – Penguin Bauble

Sentiment: Kraftin’ Kimmie – It’s Penguining To Look A Lot Like Christmas!

Inks: HP Printer High Quality Grayscale, VersaFine – Majestic Blue

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Chloe’s Crafts Paper Pad – 02-3129420 (6″ x 6″), Crafter’s Companion – Snowflake Swirls (12″ x 12″)

Die Cuts: Moonstone – Hunkydory – Vintage Filigree Frame, Waffle Flower Crafts – Nesting Squares

Miscellaneous: U-Line Double-Sided Foam Tape, White Gelly Roll Sakura #10 Pen, Ranger – Clear Super Fine Detail embossing powder, Marvy Uchida – Embossing Heat Tool, Sharpie – Gold Medium Point – Water Based Paint pen, U-Line Double-Sided Foam Tape

 

Hope you like it and have a great week!

Floral Horseshoe – Cosmos

Aug19

Today I’m sharing a CAS card that I made using KLM Digital Designs – Floral Horseshoe – Cosmos from the new August 2024 Release.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. This prevents the image from smearing when you go to colour it in. The image was coloured in with Copic markers and then cut to the size of 4″ x 5.25″. The base card was cut to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock . A Sharpie – Gold Medium Point – Water Based Paint marker was used to go around the image and the base card. The image was then adhered to the base card with liquid glue. YNS Gumdrops were applied to finish the card off!

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Floral Horseshoe – Cosmos

Inks: HP Printer High Quality Grayscale, Sharpie – Gold Medium Point – Water Based Paint, Sakura Glaze – Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Miscellaneous: YNS Gumdrops

Image coloured with Copic Markers:

Horseshoe: C5, C3, C2, C1

Flowers: BV17, BV13, BV11, BV000, E15, Y38, Y18, Y04

Leaves: BG99, BG93

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, BG01, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Mandala #3

Dec23

Today, I’m sharing a Christmas card using KLM Digital Design – Mandala #3 from the new December release. Being close to Christmas, I also made this to look like a Christmas ornament. Merry Christmas and A Happy New Year to everyone!

Hammermill – Premium Cardstock 110 lb. was used to create a 5.5″ x 5.5″ card base. DCWV – Holiday Cheer paper was cut to the same size and inked around the edges using a Sharpie – Gold Medium Point – Water Based Paint to create the gold border. This was applied directly to the base using double-sided tape.

The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers listed below and then traced around the entire image using a combination of Pental Slicci – Gold 8.0 pen for the thin lines and UNI Posca Pen – Gold for the thicker lines.

The Mandala was popped up onto the top part of the card using U-Line Double-Sided Foam Tape. With a Cuttlebug and Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel die, I die cut the Noel out of Recollections – Matte Gold Foil 3 times. I layered the 3 pieces together with liquid glue and attached the sentiment to the card. Lastly, I added in some rhinestones to complete the card.

Card Recipe:

Stamp:  Mandala #3 – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., DCWV – Holiday Cheer (6″ x 6″), Recollections – Matte Gold Foil cardstock

Dies: Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel – CED3073

Miscellaneous: U-Line Double-Sided Foam Tape, Pental Slicci – Gold 8.0 pen, UNI Posca Pen – Gold, Sharpie – Gold Medium Point – Water Based Paint

Image coloured with Copic Markers:

Mandala: BG09, BG07, BG05, B18, B16, G99, G16, YG67, YG63, YG61, YG25, YG23, YG21, R59, R37, R35, R29, R27, R24, R22

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Card of the Month – Round 1 – You Did It!

Apr1

Yippee! I am thrilled to have been asked to enter my card into the Creative Scrapbooker Magazine’s Card of the Month Contest for April! I would love it if you voted for me! Thank you! 🙏🏻 😘💙
Here is the link on Facebook:

https://creativescrapbooker.ca/card-of-the-month-april-2023/?fbclid=IwAR3vXUqlRBglU91NoJldQ6QCgmgcI4C2ORT158UZ-ISyx7rNHNdVTyDo-L0#/bracket/4416181

 

The original post where I created this card can be found here. https://rstevensoncreations.com/2023/03/10/you-did-it/

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Music Speaks!

Mar18

Today I’m sharing a music card using KLM Digital Design – Keyboard Gnome from the new March release. This image also comes with 2 more sentiments, “Turn up the volume close your eyes and let the music take over your soul” and “Music is the voice of the soul”. No words were truer spoken, music is all around us and there is something out there for everyone to listen to!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 5.5″ card base. Anna Griffin – Musical Cardstock & Vellum paper was cut to the same size as the base card. Using a Sharpie – Gold Medium Point – Water Based Paint pen, I inked around all of the edges and then adhered it to the base card with double-sided tape. Recollections – Matte Gold Foil cardstock was die cut 5 times using my Cuttlebug and Joy! Crafts – Cutting and Embossing Dance to the Music die. Using liquid glue, I applied each layer on top of each other and then glued it to the bottom of the card base.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image and fussy cut around it and the sentiment. The edges of the image were inked around with a black marker and the sentiments were adhered onto Recollections – Matte Gold Foil cardstock and then fussy cut again.

The card was now ready to assemble. I added 3M VHB – 2 sided pop-up tape to the backs of the sentiments and image and then popped up all of the pieces onto the card to complete it.

Card Recipe:

Stamp and Sentiment:  Keyboard Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Anna Griffin – Musical Cardstock & Vellum, Recollections – Matte Gold Foil cardstock

Dies: Joy! Crafts – Cutting and Embossing Dance to the Music

Miscellaneous: Cuttlebug, Sharpie – Gold Medium Point – Water Based Paint, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Hair: E15, YR23, Y38, Y21

Dress and Hat: BG09, BG05, BG02, BG01

Ribbon Sash: R46, R14, R08

Shoes: C10, C8, C6, C5, C3, C2, C1, E55, E53, E51

Keyboard Instrument and Stand: R46, R14, R08, C3, C2, C1

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

You Did It!

Mar10

Today I’m sharing a graduation card using KLM Digital Design – Graduation Gnome II from the new March release. This image also comes with 2 more sentiments, “Be the change that you want to see in this world” and “And so the adventure begins”. This little gnome is glowing with pride after graduating and accepting his diploma. Congratulations to all of the new graduates out there this year!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 4.25″ x 5.5″ card base. Recollections – Black cardstock was cut to the size of 4″ x 4-5/8″ and Recollections – Patterned paper was cut to the size of 3″ x 4.25″ using My Creative Time – Rectangle Frame Layers and my Cuttlebug. Using a Sharpie – Gold Medium Point – Water Based Paint pen, I inked around all of the edges of both pieces.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image and fussy cut around it and the sentiment. Both were adhered onto Recollections Black cardstock and then fussy cut again.

The card was now ready to assemble. I added U-Line double-sided pop-up tape to the backs of the sentiment, image and both rectangular pieces. All pieces were then popped up onto card to complete it.

Card Recipe:

Stamp and Sentiment:  Graduation Gnome II – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections Grad Paper, Recollections Black cardstock

Dies: My Creative Time – Rectangle Frame Layers

Miscellaneous: U-Line double-sided tape, Cuttlebug, Sharpie – Gold Medium Point – Water Based Paint, Xyron Create a Sticker

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E29, E27, E25, E23

Gown and Hat: C10, C8, C6, C5, C4

Boots: 100, C10, C8, C6, C5, C4

Scroll: C1, C0

Ribbon and Tassel: YR23, Y15, Y11, Y00

Glow around image: Y00

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Let Your Voice Sing!!

Nov30

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamps called Let Your Voice Sing – D15205 for the main image and Sentiment – Holiday Sentiments 003 – DS163003. Growing up we always had so much fun gathering with friends and family and singing Christmas carols.

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Recollections – Matte Gold Foil cardstock was cut to be the same size as the base and then adhered to the card using double-sided tape. Using my Cuttlebug and Hammermill – Premium Colour 100 lb. cardstock, I embossed the music design with a Cuttlebug – ProvoCraft – Allegro embossing folder. I cut it down to the size of 5.25″ x 4″ and adhered it directly to the base card.

Utilizing the Cuttlebug again and Copic Marker X-Press It Blending Card cardstock, the die-cut for the image was cut out with Spellbinders – Elegant Ovals. With a MISTI, the main image was stamped onto the die cut. It was coloured in and then a Sharpie – Gold Medium Point – Water Based Paint pen was used to colour in the fancy border surrounding the image. The sentiment was stamped with my MISTI and VersaMark ink. Ranger Super Fine Gold Embossing powder was applied to the ink and then heat embossed using a Marvy Uchida – Embossing Heat Tool. I fussy cut around the sentiment. U-Line double-sided tape was applied to the sentiment and coloured image and they were both popped up onto the card. To finish the card off, I applied Dress It Up – Glitter Holly buttons with liquid glue from their Holiday Collection.

Card Recipe:

Stamps: Let Your Voice Sing – D15205 – Dreamerland Crafts

Sentiment: Sentiments – Holiday Sentiments 003 – DS163003 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Matte Gold Foil cardstock

Die Cuts: Spellbinders – Elegant Ovals (S4-425)

Embossing Folder: Cuttlebug – ProvoCraft – Allegro

Embossing Powder: Ranger Super Fine Gold

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, Cuttlebug, Sharpie – Gold Medium Point – Water Based Paint, Dress It Up – Glitter Holly

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R24, R22, R20

Hair: E15, Y38, Y21, YR23

Robe: B18, B16, B14, B12

Wings: BV20, C1, BG0000, B0000, BV0000, YG0000, V0000, Colorless Blender

Music Book: YR30, Y000

Shadow: C1, C0, C00, B60, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Good Times!!

Jan11

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Bird Song – TDG016  for the main image and Good Times – FDG014 for the sentiment. These little birdie friends know how to whistle a tune. Unfortunately, I myself never mastered how to whistle! I’ve tried over the years, but just can’t seem to do it. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Scrapbook.com – Brights Smooth Cardstock for the background paper. This paper is great because it’s already cut to size which makes it so easy. I applied it to the base using double-sided tape. Using my Cuttlebug and Your Next Die – Stitched Frame Snowfall Hill die set, I die cut the centre piece from Copic Marker X-Press It Blending Card and the frame from Crafter’s Companion – Luxury Cardstock – Gold.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock and the sentiment onto Recollections – White cardstock. I coloured in the image with Copic markers and then added some Stickles – Diamond and Stickles – Waterfall to the parts of the snow to make it sparkly. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. To make the eyes stand out a little more, I used Sakura Glaze – Black and then added a white dot using Gelly Roll Sakura #5 Pen. Once the stickles were dry, I turned the coloured image and frame over and taped them together on the back with some Scotch tape to keep the 2 pieces together. U-line double-sided tape was then applied and I turned it over again and popped it up onto the card. The sentiment was die cut using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider. I inked around the edges with Sharpie – Gold Medium Point – Water Based Paint pen, added U-Line double-sided tape to the top half of the sentiment and added it on top of the image. Lastly I added some YNS Gumdrops – White Sugar and Sparkle to complete the card.

Card Recipe:

Stamp: Bird Song – TDG016 (High Hopes Rubber Stamps)

Sentiment: Good Times – FDG014 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Brights Smooth Cardstock (4.25″ x 5.5″), Recollections – White, Crafter’s Companion – Luxury Cardstock – Gold

Die Cuts: Your Next Die – Stitched Frame Snowfall Hill, Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Stickles – Diamond, Stickles – Waterfall, Cuttlebug, YNS Gumdrops – White Sugar and Sparkle

Image coloured with Copic Markers:

Bird1 and Scarf: R59, R39, R37, R35, R29, R27, BG09, BG09, BG05, BG02, BG01, BG000 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Bird2 and Scarf: Y17, Y15, Y13, Y11, Y02, Y00, BG72, BG57, BG49, BG32, BG11, Gelly Roll Sakura #5 Pen

Bird3 and Scarf: R56, R46, R37, R24, R22, C9, C7, C5, G16, G14, YG23, YG03

Beaks and Claws: YR18, YR14, YR12, Y19, Y08

Pine Needles: G29

Sky: B05, B04, B02, B01, Gelly Roll Sakura #10 Pen

Snow: C1, Stickles – Diamond, Stickles – Waterfall

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Christmas Dragon

Nov23

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Lee Holland Art,  Lee Holland Illustration Inspiration Facebook Group for the month of November.

Check out the Etsy store for more fantastic designs from Lee Holland Art. You can click on any of the links above or you can click here too:  https://www.etsy.com/ca/shop/leehollandart. There is a 50% off Black Friday sale going on. You should check it out!

Jump over to Passionate Paper Creations & Friends. Not a Member? Come Join! https://bit.ly/2VwG9iz.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Lee Holland Art has been sponsoring us throughout the month of November at  Passionate Paper Creations & Friends FB group site!! Today, I’m featuring this adorable dragon image from Lee Holland Art called Reindeer Antlers Christmas Dragon. Thank you Lee Holland Art for sponsoring us and having such amazing fun designs to choose from. I love all of your little dragons.

 

For the base card, I used AC Cardstock – White and cut it and scored it to be 6″ x 6″. For the background, I cut Creative Memories – Mermaid Cove Designer Paper to the same size as the base card. The image using HP High Quality Grayscale was printed onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider dies, the printed image and Hot Buy – Recollections Ombre Brights Paper were both die cut. The sentiment was stamped using my Misti, VersaMark Ink and sentiment stamps from Lawn Fawn – “Offset Sayings – Christmas” and Lawn Fawn “Winter Skies”. Ranger Super Fine Gold Embossing powder was applied to the stamped sentiments and then heat set with a Marvy Uchida – Embossing Heat Tool.

I cut the sentiment down to be 3-3/8″ x 1-2/8″ and then used W R Memory Keepers – Crop-A-Dile Corner Chomper to create .25″ corners. Using a Sharpie – Gold Medium Point – Water Based Paint pen, I went around all of the edges of the cuts with the exception of the image die cut. The image was coloured in with Copic markers and then I used a Gelly Roll Sakura #10 Pen to create the snow in the sky and a combination of Stickles – Crystal, Stickles – Waterfall and Cosmic Shimmer Fluffy Stuff which was applied prior to the Stickles being added.

The card was now ready to be assembled. I applied U-Line double-sided tape to the backs of the coloured image and cut frame to pop them up. I doubled up the tape for behind the sentiment. The base paper was applied directly to the card base using double-sided tape. I peeled off the tape from the backings of the elements and popped them all up onto the base card to finish it off.

Card Recipe:

Stamp: Reindeer Antlers Christmas Dragon – Lee Holland Art

Sentiments: Offset Sayings – Christmas – Lawn Fawn,  Winter Skies – Lawn Fawn

Inks: HP High Quality Grayscale, Versamark

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Creative Memories – Mermaid Cove Designer Paper Pack, Hammermill – Premium Colour 100 lb., Hot Buy – Recollections Ombre Brights Paper Pack (12″ x 12″)

Die Cuts: Essentials by Tattered Lace Dies – Easel Slider

Miscellaneous: U-Line double-sided tape, Sharpie – Gold Medium Point – Water Based Paint, Stickles – Crystal, Stickles – Waterfall, Gelly Roll Sakura #10 Pen, W R Memory Keepers – Crop-A-Dile Corner Chomper Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Dragon: BG72, BG57, BG32, BG11, BG09, BG05, BG02, BG01, V15, V12, V06. V000, G14, YG23, YG11, YG03, YG01

Box: E27, E25, E23

Ornaments: R59, R37, R35, E15, Y35, YR24, Y08, YG67, YG17, YG21, E35, E34, E33, E31

Sky: B05, B04, B02, B01, Gelly Roll Sakura #10 Pen

Snow: B60, C1, Stickles – Crystal, Stickles – Waterfall, Cosmic Shimmer Fluffy Stuff

Hope you like it and have a great week!

Believe in Santa!!

Nov19

Hi everyone…today we are having a sponsor day over at the Passionate Paper Creations & Friends FB group site with Joy Clair Designs!! Today I’m using this adorable Santa image and sentiment from Joy Clair Designs called Love Santa Digital Stamps. Thank you Joy Clair Designs for sponsoring us.

I printed out the image and sentiment using HP High Quality Grayscale onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then fussy cut. The sentiment was die cut with my Cuttlebug and Whimsy Stamps – Quick Strips Die Set – WSD330.

For the base card, I used AC Cardstock – White and cut it and scored it to be 6″ x 6″. For the background, I applied Craft Consortium – Made By Elves (6″ x 6″) to the base using double-sided tape. A Sharpie – Gold Medium Point – Water Based Paint was used to go around the edges of the card and also around the sentiment. I applied some Ranger Inkssentials – Glossy Accents on top of the snow to make it look like an icy pond and applied some Stickles – Crystal around the edges. Once it was dried, I popped up the image and sentiment onto the background using U-line double sided tape to complete the card.

Card Recipe:

Stamp and Sentiment: Love Santa Digital Stamps – Joy Clair Designs

Inks: HP High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Craft Consortium – Made By Elves (6″ x 6″), Hammermill – Premium Colour 100 lb.

Die Cuts: Whimsy Stamps – Quick Strips Die Set – WSD330

Miscellaneous: U-Line double-sided tape, Ranger Inkssentials – Glossy Accents, Sharpie – Gold Medium Point – Water Based Paint, Stickles – Crystal, Stickles – Star Dust

Image coloured with Copic Markers:

Skin: E21, E11, E01, E00, R30, R20

Beard and Hair: C3, C2, C1, C0, Colorless Blender

Hat and Clothing: R59, R37, R35, B60, C1, C0, E15, Y35, YR24, Y08, Stickles – Star Dust

Skates: C2, C1, C0, W3, W2, W1, Pental Sunburst Metalic Med Gel Pen – Silver

Hope you like it and have a great week!

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Joy Clair Designs,  Joy Clair Designs Facebook Group.

Oh you don’t want to miss this big sale! Jump over to Passionate Paper Creations & Friends. Not a Member? Come Join! https://bit.ly/2VwG9iz.

If you are a member of Passionate Paper Creations & Friends FB group
you can go to the top of the page and get a shopping discount.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Wishing You All The Best!!

Nov1

Today, I’m sharing a Christmas card using Dreamerland Crafts stamps called Wishing You All The Best – D20010.  This little girl is on her way to bring you some Christmas Cheer!

To make this card I used a base of 6″ x 6″ using AC Cardstock – White. I cut the background paper to the same size using Recollections – Glisten and Glow paper and then using a Sharpie – Gold Medium Point – Water Based Paint pen, I outlined all sides. This was added directly to the base card using double-sided tape. Using my Cuttlebug and dies from Gina Marie Designs – Loopy Oval, the frame was cut out of Copic Marker X-Press It Blending Card. I stamped the image using my MISTI and Memento – Tuxedo Black ink onto the die cut and then using the Sharpie – Gold Medium Point – Water Based Paint pen, I inked around all of the outside edges. I coloured the image in with Copic markers and then applied Ranger – Emboss It Pen Clear to the fur trims for the hat and clothing. I applied WOW! Sparkling Snow Embossing Glitter to the inked areas and then heat embossed everything with my Marvy Heat Embossing Tool. Using 3M double-sided tape, I popped up the oval onto the main background. To finish off the card, I applied some Stickles – Golden Rod to the centres of some of the larger snowflakes.

Card Recipe:

Stamp: Wishing You All The Best – D20010 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Ranger – Emboss It Pen Clear

Paper: Copic Marker X-Press It Blending Card, Recollections – Glisten and Glow (6″ x 6″), AC Cardstock – White

Die Cuts: Gina Marie Designs – Loopy Oval

Stickles: Golden Rod

Embossing Powder: WOW! Embossing Glitter – White Puff Twinkle

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug,  Marvy Heat Embossing Tool, 3M VHB – 2 sided tape, Sharpie – Gold Medium Point – Water Based Paint

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R22, R20

Hair: E47, E44, E43

Clothing and Hat: R59, R37, R35, B70, C1

Boots: E27, E25, E23, E21

Flowers and Leaves: G99, YG67, YG17, YG11, G21, R46, R14, R08, Y18

Bow: BG09, BG05, BG02, BG01

Basket: E57, E55, E53, E51

Shadow: Y15, Y13, Y11

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Butterflies!!

Jul2

Sharing a few cards I made today using Butterfly Whimsy – 2010 Elusive Images Stamp and a mixture of Tim Holtz Adirondack Alcohol Inks and Tim Holtz Alcohol Lift Ink. I thought it would be fun to play with this technique. I used a little too much of the Alcohol inks and therefore I embossed the colourful card with Ranger Super Fine Gold Embossing Powder.


To make my cards, I first started out with some Yupo paper, the alcohol inks listed below, a blending tool and some blending solution. I kept adding colour and daubing the paper until I was satisfied with the background. I arranged the stamps in my MISTI and then applied some Tim Holtz Alcohol Lift-Ink to the stamps and stamped it onto the coloured Yupo paper. I removed this and then immediately placed my Hammermill paper which was cut to the same size of 5.5″ x 4.25″ into the MISTI in the same position and pressed down with the same stamps. This gave me my second card.

I added some purple spatters to the second card and then die cut both cards using my Cuttlebug and My Creative Time – Rectangle Frame Layers and then placed it onto The Paper Studio – Primary Base Colours 4.25″ x 5.5″ using double-sided tape. To finish off the card, I used some Kraftin’ Kimmie Festive Dots.

To finish off the first card, I used a card base of 5.5″ x 4.25″ Hammermill – Premium Colour 100 lb. cardstock. Sharpie – Gold Medium Point – Water Based Paint was used to ink around the edges of the base card and then I applied double-sided tape to the back of the Yupo paper and applied it directly to the base.

Here are the 2 finished cards, side by side.

Card Recipe:

Stamps and Sentiment: Butterfly Whimsy – 2010 Elusive Images

Inks: Tim Holtz Alcohol Lift, VersaMark

Tim Holtz Adirondack Alcohol Inks: Wild Plum, Purple Twilight, Raspberry, Sunset Orange, Sail Boat Blue, Stream, Blending Solution

Paper: Tim Holtz® Alcohol Ink Yupo® Cardstock, Hammermill – Premium Colour 100 lb., The Paper Studio – Primary Base Colours 4.25″ x 5.5″

Embossing Powder: Ranger Super Fine Gold

Dies: My Creative Time – Rectangle Frame Layers

Miscellaneous: Kraftin’ Kimmie Festive Dots, Cuttlebug, Sharpie – Gold Medium Point – Water Based Paint, Marvy Uchida – Embossing Heat Tool

 Hope you like it and have a great week!

Happy Birthday Flower Frame

Jan17

Today, I’m sharing Floral Window 1 from KLM Digital Designs January Release. The image comes with 3 different sentiments, “You’re so Sweet”, “You’re the Best” and “Happy Birthday”. I really love how the frame comes with this image. It makes it so easy to create cards for multiple occasions and the design makes it so easy to make a quick card for someone special.

To make the card, I printed out the image onto Copic Marker X-Press It Blending Card using my HP Printer. I coloured in the image with Copic markers and then I used my Brother Scan ‘N Cut to cut around the image. A black marker was used to go around all of the edges of the flower and outer leaf. The image frame was coloured in with Sharpie – Gold Medium Point – Water Based Paint.

For the base card, Hammermill – Premium Colour 100 lb. was folded to the size of 5.5″ x 5.5″. I cut Heartfelt Creations – Winter’s Eve Collection paper to the same size as the base card. I inked around the edges with Sharpie – Gold Medium Point – Water Based Paint and adhered it directly to the base using double-sided tape. Hot Buy Craft Smart – Holiday Glitz Glitter Paper was die cut with my Cuttlebug and My Creative Time -Stitched Squares Inside and Out and attached with double-sided tape. The main image was popped up using 3M VHB – 2 sided tape. A little bit of Stickles – Yellow was added to the centre of the flower and some dots were added to finish off the card.

Card Recipe:

Stamp and Sentiment: Floral Window 1 (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Heartfelt Creations – Winter’s Eve Collection – HCDP1-281

Die Cuts: My Creative Time -Stitched Squares Inside and Out

Tools: Brother Scan ‘N Cut, Stickles – Yellow, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Flower: R89, R85, R83, R81, Y17, Y15, Y08, R23

Leaves: YG17, YG13, YG03, YG01

Gold Frame: Sharpie – Gold Medium Point – Water Based Paint

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Beautiful Mindset

Aug22

Today I’m sharing a CAS card that I made using  Nesting Bird (KLM Digital Designs).  This image from KLM Digital Designs new August release comes with 3 beautiful sentiments “Create Your Own Sunshine” and “Hope You Have A Beautiful Day” and the one I’ve featured with my card. These sentiments and stamp could be used for an Inspirational or Birthday Card! I just love the feeling of peace that this image gives me.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. This prevents the image from smearing when you go to colour it in. The image and sentiment were die cut with my Cutttlebug and dies from Essentials by Tattered Lace Dies – Easel Slider. The base of the card is 5.5″ x 5.5″. I cut some Momenta – Cardstock at the same size. To go around the background paper and die cuts, a Sharpie – Gold Medium Point – Water Based Paint marker was used. This helps give the illusion that it is mounted on gold paper. I adhered the background directly to the base card with glue so that I could move it into place easier.

The image was coloured in with Copic markers and for the eye of the bird a Sakura Glaze – Black pen was used. Then, the completed image was glued directly on top of the background. The sentiment was popped up with 3M VHB – 2 sided tape. To finish off the card, some Kraftin’ Kimmie – Rainy Day Dots were added.

Card Recipe:

Stamp and Sentiment: Nesting Bird (KLM Digital Designs)

Inks: HP Printer High Quality Grayscale, Sharpie – Gold Medium Point – Water Based Paint, Sakura Glaze – Black

Paper: Copic Marker X-Press It Blending Card, Momenta – Cardstock

Die Cuts: Essentials by Tattered Lace Dies – Easel Slider

Miscellaneous: Kraftin’ Kimmie – Rainy Day Dots, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Flowers: BV17, BV13, BV11, BV000, E15, Y38, Y18, Y04

Leaves: BG99, BG93, G21, YG23

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, BG01, C8, C5, C3, C1, C0, Rubbing Alcohol, Q-Tip

Background: Y00, Y000, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Magical Day!

Aug12

Hi There! Today, I’m sharing this month’s lesson all completed from Kit and Clowder July 2020 Markers class called “Once Upon a Time”.  The image is by artist Connie Fong. There were so many new techniques learned in this month’s video taught by Alyce Keegan. I love these lessons, because you can stop and start the videos at any time and repeat what Alyce is teaching you.

I had fun colouring in all of the background, but, then my worst nightmare started. I had cleaned all of my markers and made sure they were all full before clouring in the dress, hair and skin. Unfortunately, I ran into a few problems with my markers when I went to colour in the skin tones. For some crazy reason, they decided to get icky when blending the colours. First I tried using a Copic Colorless blender to fix it, but that didn’t really help. I really didn’t want to start over from the very beginning, so I looked up the conversion chart on the Kit and Clowder site for Copic Markers to Prismacolor Pencils. I used that conversion and coloured over the markers with the pencils for the skin tones. Then, I re-outlined her face and arms with a Pigma Micron 005 black marker after all of the colouring was completed.

I also used a PrismaColor Primiere White pencil to make some of the highlights in the folds brighter on the edges.

To put the card together, I used Kraftin’ Kimmie – Magical Friends for the sentiment. I really love the Creative Memories – Mermaid Cove Designer Paper Pack background for this image. It blended in so well. I edged around the card with Sharpie – Gold Medium Point – Water Based Paint. Lastly, to finish off the card, I fussy cut around the image and popped it up with 3M VHB – 2 sided tape and added Craft – Rhinestone Stickers – 02 -3048783 on top of the card in random places to give it some bling.

Hope you like it!

 

Simple Pleasures of Life

Aug8

Today I’m sharing Friends with Nature (KLM Digital Designs) image and sentiments from KLM Digital Designs new release.  Sometime we have to just sit back and relax and enjoy the beauty of nature surrounding us. That’s what these 2 little friends are doing on this bright summer’s day.

The main image and sentiment were printed onto Copic Marker X-Press It Blending Card using a HP Printer. The main image was coloured in with Copic markers. Then a second image image was printed out onto regular copy paper and my Brother Scan and Cut was used to cut directly around the image so that it could be used as a mask. I have a magnetic cutting board, so I placed the close-cropped image overtop of my coloured image with small magnets. Then a cloud stencil, which I had created using Avery Elle’s Pierced Clouds Die and Tim Holtz Distress Ink – Salty Ocean was used to create the clouds in the blue sky. After colouring the grass, a little piece of rag and some rubbing alcohol were used to create the texture in the grass. Once the colouring was completed, a Pigma Micron 005 black marker was used to outline the main image and make the lines a little thicker.

For the main background, I used a white card base of 6″ x 6″. Momenta – Cardstock was used for the main background, cut at the same size as the base and then inked all around the 4 edges with Kraftin’ Kimmie – Purple Pansy Ink. Then a purple ribbon was added. The background paper was then mounted onto the base card using 2-sided tape.

For the sentiment, I used My Creative Time – More Stitched Edges and Cuttlebug to die cut around it. I die-cut the coloured image with My Creative Time -Stitched Squares Inside and Out. Then both the sentiment and the coloured image were edged around on all sides using a Sharpie – Gold Medium Point – Water Based Paint to give the illusion that it was mounted onto gold paper.

Both the image and sentiments were popped up with 3M VHB – 2 sided tape to complete the card.

Card Recipe:

Stamp and Sentiment: Friends with Nature (KLM Digital Designs) Stamp comes with 3 separate sentiments.

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean, Kraftin’ Kimmie – Purple Pansy Ink

Paper: Copic Marker X-Press It Blending Card, Momenta – Cardstock, AC White cardstock

Die Cuts: Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, My Creative Time -Stitched Squares Inside and Out, My Creative Time – More Stitched Edges

Tools: 3M VHB – 2 sided tape, Brother Scan and Cut, Sharpie – Gold Medium Point – Water Based Paint, Pigma Micron 005 black marker, Cuttlebug

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Hat and Shirt: E47, E44, E43, E41

Pants: B26, B23, B21

Blouse and Socks: V25, V22, V20, V17

Shoes: BV17, BV13, BV11, BV01, BV00, BV000, C2, C1, C0

Bird: YR12, B16, B14, B12, B000, BG000, PrismaColor Premier White Pencil (PC938)

Grass: YG17, YG13, YG03, YG01, Piece of cloth and Rubbing Alcohol for texture

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

The Song of Birds

Jul22

It’s Wednesday, and this week, I used Bluebird – TLF015 from High Hopes Rubber Stamps new release for the main image and Kiss of the Sun – H223 (High Hopes Rubber Stamps) for the sentiment. I just fell in love with this image and sentiment and knew it was the perfect combination for a slim line card.

Closer Look: Blue Bird

Closer Look: Poem

For my card this week, I stamped the images and sentiment onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. The main image was die cut using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider. The sentiment was die cut using My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Layers. The image was coloured in with Copic markers. Once all of the colouring was completed, I went around all of the die cuts with a Sharpie – Gold Medium Point – Water Based Paint pen.

I decided to make this a slim line card starting out with a white card base sized at 8.75″ x 4″. I just received some new Cosmic Shimmer Pixie Powders and just had to try them out. So I cut some Monte Marte – Watercolour Book – 190 GSM paper the same size and started playing. This background is the one that I decided to go with. I just loved the way it picked up some of the same colours as the flowers. The powder was easy to use. You just sprinkle some powder on the paper and spritz with water. You can’t really make it out in the photo, but the paper actually has a beautiful pearlesque look to it. I also went around all of the sides of the base with the Sharpie pen as well. I then popped up the sentiment and coloured image with 3M VHB – 2 sided tape and added some embellishments.

When I went to decorate the little flower embellishments with Stickles – Yellow, some accidentally went onto my background paper.  I decided I really liked the look and then just added it everywhere using the tip of my stylus.

Card Recipe:

Stamp:  Bluebird – TLF015  (High Hopes Rubber Stamps)

Sentiment: Kiss of the Sun – H223 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Cosmic Shimmer Pixie Powder – Candy Pink

Paper: Copic Marker X-Press It Blending Card, Monte Marte – Watercolour Book – 190 GSM, Hot Pink cardstock

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers, Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Craft – Rhinestone Stickers, Sharpie – Gold Medium Point – Water Based Paint

Image coloured with Copic Markers:

Flowers: RV17, RV04, RV02, RV000, E15, Y38, Y15, Y04

Leaves: YG67, YG17, YG09

Branches: E31, E29, E23

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, BG01, C8, C5, C3, C1, C0, W5, W3, W1, Colorless Blender

Background: Y02, Y00, Y000, Q-Tip, Rubbing Alcohol

Main Background: Cosmic Shimmer Pixie Powder – Candy Pink, Stickles – Yellow, Forever In Time Bling Tape – Floral, Water Spritzer

Hope you like it and have a fantastic week!

Be sure to check out all of the fun new images on the High Hopes website. You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

All Dreams Come True

Jul15

It’s Wednesday, and this week, High Hopes Rubber Stamps new release Dreamy Willa – SLF010 is looking up into the stars and sharing this special moment with her little friend. I thought All Dreams Come True – G011 (High Hopes Rubber Stamps) was the perfect sentiment to go with this adorable new image. Sometimes it’s nice to be just like Willa and just gaze up at the stars and just live in the peace and tranquility of the moment. Have you ever done this? I know I have.


To make my card this week, I started out with a base card of 6″ x 6″. Then I cut the main background the same size using Hot Buy Craft Smart – Moon Flower Magic. I just fell in love with this paper and thought it went so perfectly with the new image. I also die cut some miscellaneous cardstock that I had which had little stars and is navy blue using My Creative Time – Scalloped Stitched Oval Dies. I also, die cut the main image with the same set of dies out of Copic Marker X-Press It Blending Card. The sentiment was die cut using My Creative Time – Ribbon End Dies. All of the die cuts were then edged with Sharpie – Gold Medium Point – Water Based Paint.

Both the main image and sentiment were stamped using my Misti and Memento – Tuxedo Black ink. The image was then coloured in using Copic markers which I have listed below. Once the image was all coloured, I bumped up the background, image and sentiment with 3M VHB – 2 sided tape.

Card Recipe:

Stamp:  Dreamy Willa – SLF010 (High Hopes Rubber Stamps)

Sentiment Background: All Dreams Come True – G011 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Moon Flower Magic, Miscellaneous Cardstock

Die Cuts: My Creative Time – Scalloped Stitched Oval Dies, My Creative Time – Ribbon End Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Sharpie – Gold Medium Point – Water Based Paint

Image coloured with Copic Markers:

Willa: W5, W4, W3, W1, W0, W00, E93, R20, R02, B05, B04, B02, C0, Gelly Roll Sakura #10 Pen, Sakura Glaze – Black, Pigma Micron 01 black marker

Grass: YG17, YG13, YG03, YG01

Sky: B99, B97, B79, B69, B39, B37, B29, B28

Moon: BV23, C1, C0, Y0000, Colorless Blender

Lady Bug: R24, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen, Pigma Micron 01 black marker

Stars: Gelly Roll Stardust – Clear

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Father’s Day – Come Sail Away!

May10

Today I’m sharing a Father’s Day card that I made using  Come Sail Away (KLM Digital Designs).  It comes with multiple sentiments, but I decided to choose the sentiment from Father Gnome and Kids & Sentiments (KLM Digital Designs). You could also use this image to make a Special birthday card, Bon Voyage or Inspirational card too!

For this card, I printed out the image with my HP Printer onto Copic Marker X-Press It Blending Card using Grayscale. I used Copic markers to colour in the image. For the water, I used a variety of markers and created the movement of the water by just wisping them over the paper very gently. Then I added in some white caps using Sharpie Water Based Paint – White – Extra Fine Point. I did this by just dabbing the paper with tight dots of ink.

For the sand and sky, I used a special technique that I saw on-line, using a Q-Tip and Colorless blender Re-Inker to wet my background and then adding in the colours also using a Q-Tip and Copic Re-inkers. This was the first time I ever tried this and I just love how it turned out.

After the image was coloured in, I went around the edges of both the card and the image with Sharpie – Gold Medium Point – Water Based Paint. Then I mounted the image on top of the background on a 5.5″ x 4.25″ card base using some 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Come Sail Away (KLM Digital Designs)

Sentiment: Father Gnome and Kids & Sentiments (KLM Digital Designs)

Inks: HP Printer Grayscale, Sharpie – Gold Medium Point – Water Based Paint, Sharpie Water Based Paint – White – Extra Fine Point

Paper: Copic Marker X-Press It Blending Card, KaiserCraft – High Tide – 6.5″ Paper Pad

Die Cuts:  Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Tools: 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Water: BG72, BG70, B93, B91, B52, B41, B000, C1, Y000, Colorless Blender, Sharpie Water Based Paint – White – Extra Fine Point

Rocks: N4, N2, N1, N0, E30

Sky: B0000, B000, Colorless Blender

Sand: E30, E31, Colorless Blender

Cloud: BG70, C0, Colorless Blender

Sailboat: B39, B37, C1, C0, E23, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.