Tag Archive | Memento – Tuxedo Black

Todd’s 60th Birthday!

Aug29

Today I’m sharing a Birthday card that I made for my husband’s 60th Birthday using the image and sentiments from Art Impressions – Dance It Out – 5278 and image from Cake Popper Set (4475) (Retired). He hated the thought of turning sixty and being a few years older than him, I couldn’t resist doing a funny card for his birthday.

To create the card, I began with the card base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock.  I cut Your Next Stamp Designer Pad – Birthday Boy paper to the size of 5.5″ x 1.75″ and 5.5″ x 2.5″ and adhered it to the base using double-sided tape. Lastly, Tim Holtz Distress Ink – Blueprint Sketch was applied around the edges of the card using a finger dauber.

With Memento – Tuxedo Black ink and my MISTI, I stamped all of the images onto Copic Marker X-Press It Blending Card. I coloured in all of the images and then fussy cut around them. For the image on the front of the card. I popped it up onto black cardstock using U-Line Double-Sided foam tape and then fussy cut around it again.

For the front of the card, with my Cuttlebug and Sizzix Thinlets – Balloon Occasions, I die cut the “Happy” and “birthday” twice. I ran the blue “Happy” through my Xyron Create a Sticker and attached it directly to the card. The Yellow and Blue inlays were added from the die cut pieces using liquid glue. Liquid glue was also appplied to the 2 “Birthday” die cuts and attached to the card. U-Line Double-Sided foam tape was applied to the back of the man image and popped up onto the card. I stamped the sentiment using Versafine – Majestic Blue with my MISTI. Ranger – Clear Super Fine Detail embossing powder was applied and then heat embossed with Marvy Uchida – Embossing Heat Tool. Poppystamps – Christmas Quotes dies were used to die cut the sentiment. Using a blending brush with some yellow ink still on it, I applied it and then added some U-Line Double-Sided foam tape to pop it up on the card.


For the inside of the card, the image was applied using liquid glue. The sentiments were stamped using Versafine – Onyx Black ink with my MISTI. Ranger – Clear Super Fine Detail embossing powder was applied and then heat embossed with Marvy Uchida – Embossing Heat Tool. Lastly, I thought it would be fun to add in his age onto the balloons. Using Die-Namics – Frosted Alphabet, and my Cuttlebug, I die cutted the numbers and frosting out of Copic Marker X-Press It Blending Card. The numbers were coloured in with the same colours as the cake and then Stickles – Diamond was added to the icing. Once the stickles was dry I applied the 2 pieces together with liquid glue and attached them to the balloons.


My husband loved his card and I hope you do too!

Card Recipe:

Stamps and Sentiment: Art Impressions – Dance It Out – 5278, Cake Popper Set (4475) (Discontinued)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Blueprint Sketch, Versafine – Majestic Blue, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Your Next Stamp Designer Pad – Birthday Boy (6″ x 6″)

Dies: Sizzix Thinlets – Balloon Occasions (666014), Poppystamps – Christmas Quotes, Die-Namics – Frosted Alphabet

Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Ranger – Clear Super Fine Detail embossing powder, Marvy Uchida – Embossing Heat Tool, Stickles – Diamond, U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R24, R20

Man

Hair: C7, C5, C3, C2, C1, C0, C00

Shirt: B06, B04, B02, B00, Colorless Blender

Pants, Shoes and Belt: E59, E57, E29, E27, E25, E23, Y19

Woman

Hair: Y38, Y19, Y15, Y11

Dress and Earrings: BV08, BV04, BV02, BV01

Cake, Flowers and Ribbons: G99, G24, B06, B02, B00, B000, B0000,  BV04, BV02, BV01

Balloons, Numbers, Hat and Whistle: B06, B04, B02, B01, B00, B0000, BV08, BV04, BV02, BV01, BV0000

Hope you like it and have a great week!

Matchbook Get Well!

Jul9

Today I’m sharing a miniature Get Well card using Art Impressions – MB Get Well – 5499, MB Template Dies (5317), MB Envelope Die (5318) and MB Wall Accessories (5323) that I made for a friend that had just had surgery. Love these little cards as they are so fun to make.

To create the card, I began with the card base using Carta Bella Paper Co. – Botanical Garden double-sided paper, Cuttlebug die-cutting machine and the Art Impressions – MB Template Dies (5317). From the same die set, the windows and window frames were cut out using Hammermill – Premium Colour 100 lb. cardstock. Lastly, with the same dies, I cut out the floor using Joy Crafts – Artist Trading Card – Wood Texture paper.

With Memento – Tuxedo Black ink and my MISTI, I stamped all of the images and the sentiment onto Copic Marker X-Press It Blending Card. I coloured in all of the images and then, using the Cuttlebug again, I die cut all of the inside pop-ups using Art Impressions – MB Get Well – 5499 and added features using MB Wall Accessories (5323). Lastly, I die cut the envelopes out of some scrap double-sided paper that I had in my stash using the Art Impressions – MB Envelope Die (5318).

Double-sided tape was applied to do the assembly on the tabs and wall items. They were then all adhered to the base card.  Double-side tape was also applied to the flaps of the larger envelope to complete the assembly. For the small envelope, I used the little bow and a pop-dot to close it so that it could be opened easily.

Card Recipe:

Stamps and Sentiment: Art Impressions – MB Get Well – 5499, MB Wall Accessories (5323)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Carta Bella Paper Co. – Botanical Garden (6″ x 6″)

Dies: Art Impressions – MB Get Well – 5499, MB Template Dies (5317), MB Envelope Die (5318) and MB Wall Accessories (5323)

Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug

Image coloured with Copic Markers:

Side Tables: C1, C0, C00

Bed Frame and Wheels: C7, C5, C3, C2, C1, C0, C00

Bed Sheets and Pillow: C1, C0, C00, RV01, RV00, RV000

Kleenex Box, Card, Blanket, Slippers: RV66, RV63, RV55, R27, R22

Flowers, Stems and Flower Pot: Y17, Y13, YG17, YG13, R27, R22, E99, E97, E00

Chair: E44, E43, W7, W5, W3, W1

Glass: B000

White Board: C3, C2, C1, C0, C00, R27, Y17

Clock: C3, C1, C00

Hope you like it and have a great week!

Birthday Ssschmirth-day!

Jun28

Today, I’m sharing a fun birthday card using Whimsy Stamps – Me-Wow Cat Birthday that I made for my father-in-laws 80th Birthday. He’s wasn’t too keen on turning 80 so I thought I would make this fun card for him! He loved it and I hope that you do too!

To create the card, I began with a card base of 5.5″ x 5.5″ using Hammermill – Premium Colour 100 lb. cardstock. Echo Park Paper Co. – Happy Birthday Boy paper was cut to the same size as the base and adhered with double-sided tape. Using my Cuttlebug and My Creative Time – Stitched Squares Inside and Out, I die cut a 3.5″ x 3.5″ square out of Copic Marker X-Press It Blending Card and a 4″ x 4″ square out of Recollections – Black cardstock.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image from Whimsy Stamps – Me-Wow Cat Birthday. The image was coloured in with Copic markers and then I stamped the image again onto a Post-It note and fussy cut around the balloon and upper half of the kitty to use it as a mask. I placed it over top of the coloured image and created the party background using Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Squeezed Lemonade and Tim Holtz Distress Ink – Wilted Violet which I applied using Blending Brushes. After the first layers were added, I used the same colours,  but this time I used Hero Arts – Party Confetti Stencil (Crop & Create Exclusive) to create the streamers. I removed the mask and put the image into my MISTI once again and this time, I stamped the sentiment from the same stamp set using Versa Fine – Onyx Black ink and then heat embossed it using Ranger – Clear Super Fine Detail embossing powder and Marvy Uchida – Embossing Heat Tool. Lastly, U-Line double-sided tape was applied to the back of the image and the black square. These were then popped up onto the centre of the card.

Card Recipe:

Stamp: Whimsy Stamps – Me-Wow Cat Birthday – C1386

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Squeezed Lemonade and Tim Holtz Distress Ink – Wilted Violet

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock, Echo Park Paper Co. – Happy Birthday Boy 6″ x 6″

Dies: My Creative Time – Stitched Squares Inside and Out

Stencil: Hero Arts – Party Confetti Stencil (Crop & Create Exclusive)

Embossing Poweder: Ranger – Clear Super Fine Detail

Miscellaneous: U-Line double-sided tape, Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, Blending Brushes

Image coloured with Copic Markers:

Cat: C10, C8, C7, C6, C5, C4, R22, R02, 100, YG09, YG07, YG05

Hat: BG15, BG11, BG10, BG09, BG05, BG02, BG01

Balloon: BG09, BG05, BG02, BG01, BG0000

Lawn: YG25, YG23, YG21, YG03, YG01

Hope you like it and have a great week!

Unicorn Birthday!

May29

Today, I’m sharing a slim-line birthday card using Gerda Steiner Designs – Moody Unicorns (GSD471) for the May Share Your Designs Challenge.

 

To create the card, I began with a card base of 9.5″ x 7″ using Hammermill – Premium Colour 100 lb. cardstock. I searched my die collection to find the perfect oval and couldn’t find any to fit the images that I had in mind. Since I own a Cricut Explore machine, I thought why not make my own front panel? To do this, I signed into Cricut Design Space to create the slim-line design.

I used the free shapes and selected the square, which I re-porportioned to be 9.5″ x 7″. I imported Scalloped Oval (#M41B9A) from the Baby Steps cartridge. I then duplicated this image several times and used the slice tool to die cut the rectangle in 3 places and the ovals in several places until I was satisfied with the final result. Once I loaded my mat and had selected “Make it”, I chose 2 patterned papers from Craft Smart – Hot Buy – Kawaii Dream. The Unicorns were used for the main panel and the purple pattern was used for the back panel. For the larger scalloped oval,Hot Buy – Recollections – Jewel Tones paper was used and for the smaller scalloped oval, Recollections – Purple Passions was used.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image from Gerda Steiner Designs – Moody Unicorns (GSD471). The images were coloured in with Copic markers  and then Stickles – Diamond was applied to the manes, tails and cupcake icing. With my MISTI and VersaMark ink various sentiments from the same stamp set were stamped onto Recollections – Purple Passions paper. These were then embossed with Ranger Embossing Powder White – Extra Fine Detail. Marvy Uchida – Embossing Heat Tool was then used to heat emboss the embossing powder. All of the sentiments were then cut using a small slicer device.

To assemble the card, I applied liquid glue to the large patterned purple rectangle and applied it directly to the base card. For the front panel, I first glued on the larger scalloped ovals and then applied the smaller scallops in the same way. The completed piece was then glued on top of the purple patterned paper. Each of the little unicorns and the sentiments were popped up onto the card using U-Line double-sided tape. Lastly, Tim Holtz Distress Ink – Evergreen Bough was applied around the edges of the card with a small finger dauber and Stickles – Diamond was added to the hearts to make them sparkle.

Card Recipe:

Stamp: Gerda Steiner Designs – Moody Unicorns (GSD471)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Purple Passions 8.5″ x 11″, Craft Smart – Hot Buy – Kawaii Dream (12″ x 12″), Hot Buy – Recollections – Jewel Tones (12″ x 12″)

Cricut Explore and Cricut Design Space: Scalloped Oval (#M41B9A) – Baby Steps, Shapes – Rectangle

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line double-sided tape, Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, Stickles – Diamond

Image coloured with Copic Markers:

Unicorns:

Tail and Mane: RV14, RV13, BG15, BG13, Y15, Y13, B14, B12, V15, V12

Hooves: C9, C7, C5, C3

Body: C1, C0, C00, Colorless Blender, R02, R00

Eyes: B14, B12, B01

Hope you like it and have a great week!

Entered into: https://gsd-stamps.com/blogs/share-your-designs/play-along-in-our-syd-challenge-may-2023

Mother’s Hug!

May22

Today, I’m sharing a Mother’s Day card that I made for my mom this year using Stampingbella – Curvy Girl BIG HUG (eb1019). Our mom is very special to all of us and she was like a mom to several other families growing up as well. She has a heart of gold and is loved by everyone. She loved her card and I hope you do too!

To create the card, I began with a card base of 6″ x 6″ using AC Cardstock – White. Recollections – Matte Gold Foil cardstock was cut to the same size as the base and adhered with double-sided tape. Dollarama – Crafts Designer Paper – 02-3093268 was cut to the size of 5.75″ x 5.75″. The edges were inked with Tim Holtz Distress Ink – Saltwater Taffy and then I popped this piece onto the base card using U-Line Double-Sided tape.

Using my Cuttlebug and Gina Marie Designs – Nested Scalloped Stitched Rectangles , I die cut Recollections – Matte Gold Foil cardstock and Copic Marker X-Press It Blending Card cardstock. I used the dotted lines as a guideline and cut away the outer edges from the Copic Marker X-Press It Blending Card cardstock so that it would fit perfectly inside the gold frame.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image from Stampingbella – Curvy Girl BIG HUG. The image was coloured in with Copic markers. With my MISTI, I stamped the sentiment from the same stamp set using VersaMark ink and then heat embossed it using Ranger – Super Fine Gold embossing powder and Marvy Uchida – Embossing Heat Tool. I cut around the sentiment and then used a UNI Posca Pen – Gold to go around the edges.

U-Line Double-Sided tape was added to the gold rectangle frame, coloured image and sentiment. All were then popped up onto the card. To finish it off, a few PinkFresh Studio Essentials – Ombre Glitter Drops: Sparkle & Shine (#PF113ES) were added around the image and the card.

Card Recipe:

Stamp: Stampingbella – Curvy Girl BIG HUG (eb1019)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Saltwater Taffy, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Dollarama – Crafts Designer Paper – 02-3093268, AC Cardstock – White, Recollections – Matte Gold Foil cardstock

Dies: Gina Marie Designs – Nested Scalloped Stitched Rectangles

Embossing Poweder: Ranger Super Fine Gold Embossing powder

Miscellaneous: U-Line double-sided tape, Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, PinkFresh Studio Essentials – Ombre Glitter Drops: Sparkle & Shine (#PF113ES), UNI Posca Pen – Gold

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E29, E27, E25, E23, E15, Y38, Y21, YR23

Mother’s Dress: Y19, Y15, Y13, Y02

Daughter’s Dress and Mom’s Shoes: B06, B04, B02, B00

Flowers: R85, R83, R81, RV02, RV000, E13, Y17, Y08

Leaves: G99, G94, G85, YG17, YG13, YG01

Background and Shadow: BG0000, W2, W1, W0, W00

Hope you like it and have a great week!

Matchbook Craft Room!

May2

Today I’m sharing a miniature Birthday card using Art Impressions – MB Craft Room Set – 5321, MB Template Dies (5317) and MB Envelope Die (5318) that I made for my Aunt’s Birthday in April. My aunt is a crafter like myself. When I first handed the card to her, she looked at me as if to say “What is this?” I started to laugh and said, “It’s your Birthday Card”. The card is the size of a matchbook. LOL! She couldn’t believe how tiny it was. I wrote the sentiment on the inside of the smaller envelope. When she opened her card, she fell in love with it and I hope that you do too! Proof that some big things do come in small packages!!!! 🙂

To create the card, I began with the card base using Hammermill – Premium Colour 100 lb. cardstock, Cuttlebug die-cutting machine and the Art Impressions – MB Template Dies (5317). I used this same die cut again to add the paper background for the inside of the card and adhered them together using liquid glue. From the same die set, the windows, window frames, hearts and bow were also cut out. Lastly, with the same dies, I cut out the floor using Joy Crafts – Artist Trading Card – Wood Texture paper.

With Memento – Tuxedo Black ink and my MISTI, I stamped all of the images and the sentiment onto Copic Marker X-Press It Blending Card. I coloured in all of the images and then, using the Cuttlebug again, I die cut all of the inside pop-ups using Art Impressions – MB Craft Room Set – 5321. Lastly, I die cut the envelopes out of some scrap double-sided paper that I had in my stash using the Art Impressions – MB Envelope Die (5318).

Double-sided tape was applied to do the assembly on the tabs and they were adhered to the base card. I wanted to create a small picture frame, so I drew one onto Copic Marker X-Press It Blending Card cardstock, coloured it in with Copic markers and then cut around the frame. The heart was then adhered into the centre of the frame with some liquid glue. A few small gems were also added above and below the heart.

Double-side tape was applied to the flaps of the larger envelope to complete the assembly. For the small envelope, I used the little bow and a pop-dot to close it so that it could be opened easily.

Card Recipe:

Stamps and Sentiment: Art Impressions – MB Craft Room Set – 5321

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Miscellaneous cardstock from stash, Joy Crafts – Artist Trading Card – Tough Texture (3.25″ x 2-3/8″)

Dies: Art Impressions – MB Craft Room Set – 5321, MB Template Dies (5317) and MB Envelope Die (5318)

Miscellaneous: MISTI – Most Incredible Stamping Tool

Image coloured with Copic Markers:

Craft Bag, Paint Can Container and Pen Container: B06, B04, B02

Cutting Machine: B06, B02, N9, N7, N3, C1, C00

Shelves and Cabinets: C2, C1, C0, C00, Colorless Blender

Boxes and Bins: E55, E53, E51

Books: W9, W7, W5, C9, Y19, Y17, G07, G03, G00, B04. B01, Y23, R37, R35

Glue Bottle: C1, C0, YR16, YR14, YR12

Chair: N9, N7, N5, N3, C1, C00

Vase and Flowers: RV63, RV52, G03, V09, V04

Markers and Brushes: V06, V04, YR18, YR12, C5, C3, R37, R35

Sign: E25, E23, BG000

Hope you like it and have a great week!

Sweet Note of Thanks!

Mar7

Today I’m sharing a Thank-you card using Your Next Stamp – Music Bunny – CYNS262. I was recently on a cruise and we met some new wonderful couples that sat at the tables next to ours and we exchanged information. Unknown to us until the final evening, the couple that sat directly beside us was Steven Gilliland and his wonderful wife Diane. Steven happens to be a very well known acclaimed author and public speaker. My husband and I were so happy when Steven sent us a few of his books, “Making a Difference” and a “Cherry On Top”. Steven had personally autographed them to us as well. What a kind and awesome gesture and it was very much appreciated. We are currently reading his books and just love them. As a thank you for their kind generosity, I sent them this card from my husband and I.

To create the card, I began with a card base of 5.5″ x 5.5″ using Hammermill – Premium Colour 100 lb. cardstock. I cut Recollections – Matte Gold Foil cardstock to be the same size as the base card and applied double-sided tape to it. This was adhered directly to the base card. Next, I cut a piece of Hammermill – Premium Colour 100 lb. cardstock to the size of 5.25″ x 5.25″. I sprayed some water onto the paper and then using Kraftin’ Kimmie – Musical Melodies stencil I placed it on top of the paper and ran it through my Cricut Die Cutting machine to emboss the paper. Once the paper was dry, I placed the stencil over top of the paper again and this time, using Tim Holtz Distress Ink – Black Soot and a blending brush, I coloured in the musical notes. I also inked around the edges with the same ink and a mini dauber.

Using my Cuttlebug and PinkFresh Studio – Essentials – Blanket Stitched Square 4″ dies, I die cut Copic Marker X-Press It Blending Card. The main image was stamped onto this die cut using Memento – Tuxedo Black ink and my MISTI. I coloured in the image and created my own background. Once this was completed, I put the image back into my MISTI and stamped the sentiment using Versa Fine – Onyx Black ink. Ranger – Clear Super Fine Detail embossing powder was applied over top of the ink and then heat embossed with a Marvy Uchida – Embossing Heat Tool. The little notes were added with Versa Fine – Onyx Black ink and a miniature stamping block. I just chose several notes and stamped them randomly around the image. I felt like the image was still missing something, so I decided to take my Copic black marker (100) and using the lines from the die cut as a guide, coloured in every second stripe. I thought this made it look like a piano keyboard. Lastly, My Creative Time – Stitched Squares Inside and Out 4.5″ were used to die cut Recollections – Matte Gold Foil cardstock.

The card was now ready to assemble. I added U-Line double-sided pop-up tape to the back of the music square, gold square and image. Each of them were popped onto each other and centred onto the base card.

Card Recipe:

Stamp: You’re Next Stamp – Music Bunny – CYNS262

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Black Soot, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Matte Gold Foil cardstock

Dies: PinkFresh Studio – Essentials – Blanket Stitched Square, My Creative Time – Stitched Squares Inside and Out

Stencil: Kraftin’ Kimmie – Musical Melodies

Embossing Poweder: Ranger – Clear Super Fine Detail

Miscellaneous: U-Line double-sided tape, Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, Sakura Glaze – Black pen

Image coloured with Copic Markers:

Rabbit: C3, C2, C1, C0, C00, R30, R02

Mice: W3, W2, W1, R30, R02, (Eyes and Nose – Sakura Glaze – Black pen)

Ribbon: R59, R37, R35

Flower: B29, B26, B23, Y17, Y11

Piano: W9, W7, W5, C9

Piano Chair: W9, W7, W5, R59, R37, R35

Floor: E49, E34, E29, E27, E25, E23

Wall: BG32, BG11, BG10

Border: 100

Hope you like it and have a great week!

Special Thank You!

Feb20

Today I’m sharing a Thank-you card using Stampin’ Up – Bella and Friends. I was recently on a cruise and forgot to bring a Thank-you card for our Stateroom Attendant. Her name was Monalisa and she was such a super nice lady who was always smiling and super nice.  I told her that I made homemade cards and wanted to make sure that I sent her a special one just for her. Monalisa told me that she loved Lhasa Aspos and so I tried to make this little puppy look like one.

Anna Griffin – Shaker Card Kit was used to make the base and front of the card. The size was 5″ x 5″. I applied the pre-made shaker envelope directly to base card using double sided tape. Once again, I applied double-sided tape to the the shaker bag and then applied the top part of the card from the kit. From the same kit, I also added some liquid glue to the back of the large fancy heart and applied it directly over top of the heart shape on the front of the card.

With a stamping block and little dog stamp from Stampin’ Up – Bella and Friends, I inked the stamp with Memento – Tuxedo Black ink and then stamped it twice off to the side on some spare paper and then onto Copic Marker X-Press It Blending Card. This left the outline nice and light, almost like a no-line stamped image. I wanted it this way as most of the puppy was white and I just wanted the furry outline to look like a shadow. Once the puppy was coloured, I fussy cut around it and added some U-Line Double-Sided tape and popped it up onto the front of the card.

With my Cuttlebug and dies from PaperCrafter Today – 15 Die Cut Sentiment Set, I die cut the words “Thank You” from some scrap Hammermill – Premium Colour 100 lb. cardstock and Recollections – Matte Gold Foil cardstock. I applied some liquid glue to the backs of the 2 die cuts and after joining the 2 cuts together, applied them to the front of the card as well. Lastly, to complete the card, I added some little hearts from Doodlebug Design Inc. – Shape Sprinkles – love this! and rainbow hearts.

Card Recipe:

Stamp: Stampin’ Up – Bella and Friends

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Matte Gold Foil cardstock, Anna Griffin – Shaker Card Kit

Dies: PaperCrafter Today – 15 Die Cut Sentiment Set

Miscellaneous: U-Line double-sided tape, Doodlebug Design Inc. – Shape Sprinkles – love this! and Doodlebug Design Inc. – Shape Sprinkles – rainbow hearts

Image coloured with Copic Markers:

Puppy: E33, E23, E21, E000, N1, N0, Colorless Blender (Eyes and Nose – Sakura Glaze – Black, Gelly Roll Sakura #8 Pen)

Collar and Heart: R46, R14, R08

Hope you like it and have a great week!

Oh Puck! I Forgot!

Jan9

Sharing a belated birthday card that I made today using Photo-Play – O Canada 2 Beaver & Hockey and Lawn Fawn – Let’s Go Nuts for the bottom half of the sentiment. I couldn’t resist this adorable beaver and it’s sentiment when I saw it. Can you guess what hockey team he plays for? LOL!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut the iced boards and ice to the size of 5.5″ x 1-7/8″ and coloured in the lines with copic markers using a ruler. I added a shadow where the beaver was going to be and then applied Wink of Stella – Clear onto the ice portion. I applied the rink portion to the base using double-sided tape. Echo Park Paper Co. – Happy Birthday Boy paper was cut to the size of 5.5″ x 2-3/8″ and it was adhered to the card using liquid glue.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the images onto Copic Marker X-Press It Blending Card. They were coloured in with Copic markers and then fussy cut. Using a black marker, I inked around all of the edges. U-Line double-sided tape was applied to the images and they were popped up onto the card.

Using my MISTI again and VersaMark ink, I stamped the sentiments onto Recollections – Black cardstock. Ranger Embossing Powder White – Extra Fine Detail was applied to the ink and then heat embossed with a Marvy Uchida – Embossing Heat Tool. U-Line double-sided tape was applied to the sentiments and they were popped up onto the card.

Card Recipe:

Stamp and Sentiment:  O Canada 2 Beaver & Hockey – OHC2486 – Photo-Play

Sentiment: Let’s Go Nuts – Lawn Fawn

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park Paper Co. – Happy Birthday Boy (6″ x 6″), Recollections – Black cardstock

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line double-sided tape, MISTI – Most Incredible Stamping Tool, Wink of Stella – Clear, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Beaver: E37, E35, E34, E29, E27, E25, E23, (Eyes and Nose: Sakura Glaze – Black)

Hockey Uniform, Helmet and Hockey Stick: B29, B26, B24, C9, C7, C5, C1, C0

Puck: C9, C7, C5, (Eyes: Sakura Glaze – Black)

Ice Boards: R14, Y15, B79

Ice and Shadow: B00, B0000, Wink of Stella – Clear

Hope you like it and have a great week!

Penguin Joy

Jan8

Sharing another Christmas card that I made using Whimsy Stamps – Penguin Joy – C1140. I love colouring penguins and couldn’t resist this adorable image when I saw it! LOL!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut Recollections – Fireside paper to be the same size and adhered it to the base using double-sided tape. I applied Crafts – Sparkling Stickers – 02-3068629 – Red to a piece of Hammermill – Premium Colour 100 lb. cardstock. Using my Cuttlebug and MFT – Cross Stitch Rectangle dies, I die cut a large rectangle for the Sparkle paper combined piece and a smaller rectangle from Copic Marker X-Press It Blending Card cardstock. Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the smaller rectangle. This was coloured in with Copic markers. I applied the snow flakes in the sky using a UNIPosca PC-3M White marker.  Stickles – Diamond was applied to create the snow on the ground. U-Line double-sided tape was applied to both of the die cuts and they were popped up onto the centre of the card.

Card Recipe:

Stamp and Sentiment:  Penguin Joy – C1140 – Whimsy Stamps

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Fireside 6″ x 6″ (15.2 cm x 15.2 cm), Crafts – Sparkling Stickers – 02-3068629 – Red

Dies: MFT – Cross Stitch Rectangle

Miscellaneous: U-Line double-sided tape, Stickles – Diamond, UNIPosca PC-3M White marker, MISTI – Most Incredible Stamping Tool

Image coloured with Copic Markers:

Penguins: W9, W7, W5, W0, E41, E40, E15, YR14, Y17, Y11

Signs: YR31, YR30

Greens: YG63, YG07, G19, G17

Reds: R59, R37, R35, R21

Holly: BG99, YG67, YG63, YG61, G21

Sky: B02, B01, B00, B000

Snow: BV20, B000

Hope you like it and have a great week!

Merry Christmas Bears!

Dec25

Sharing a Christmas card that I made for my husband this year using Penny Black – Nose to Nose – 30-521 and Gina K. Designs – Peaceful Christmas for the trees. Bears have a special place in our hearts, so this was the perfect image to celebrate our Christmas with.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut American Crafts Vicki Boutin Mixed Media Foundations Paper to be the same as as the base. I went out of my comfort zone and attempted to create Northern Lights in the sky by applying a combination of Tim Holtz Distress Oxide Inks – Prize Ribbon, Twisted Citron, Villainous Potion and Black Soot with blending brushes after watching several YouTube videos. Once I was satisfied with the colours, I spritzed the paper with water and allowed it to dry. Once again, I did some ink blending with the same colours. I used some water and a small paint brush and applied Cosmic Shimmer – Opal Glaze Polish – Gilded Avocado over the entire sky. I set this aside to dry. Wasn’t quite what I expected it to be, but I still liked it and hope that you do too!

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card. I coloured in the image and then fussy cut it out. By now the background was dry. I put the background back into my MISTI and this time, using Color Hue – Remarkable Ink Pad Eclipse Black, I stamped the trees. I mixed together a combination of FolkArt – Extreme Glitter Acrylic Paint and Delta Ceramcoat – White. With a small paint brush and some water, I applied this to the bottom below the trees and onto the small heart. I love the way some of the blue and purples came through onto the snow giving it some natural shadows. I also added in some stars by putting some of the mixture onto the brush once again and then tapping it to create a small splatter in the sky. This dried fairly quickly. I attached the finished background to my base card using double-sided tape. U-Line double-sided tape was applied to the image and heart and then they were both popped up onto card. Stickles – Diamond was applied to create the snow on the ground to give a cast shadow below the bears. Lastly, I cut the sentiment out of Recollection – Christmas Vellum. This was put through my Xyron Create a Sticker to make it lay flat and not show any glue marks.

Card Recipe:

Stamps:  Nose to Nose – 30521 – Penny Black, Peaceful Christmas – Gina K. Designs

Inks: Memento – Tuxedo Black, Color Hue – Remarkable Ink Pad Eclipse Black, Tim Holtz Distress Oxide Inks – Prize Ribbon, Twisted Citron, Villainous Potion and Black Soot

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., American Crafts Vicki Boutin Mixed Media Foundations Paper 12″X12

Paint: Delta Ceramcoat – White, FolkArt – Extreme Glitter Acrylic Paint

Miscellaneous: U-Line double-sided tape, Stickles – Diamond, MISTI – Most Incredible Stamping Tool, Cosmic Shimmer – Opal Glaze Polish – Gilded Avocado, Xyron Create a Sticker, Blending brushes

Image coloured with Copic Markers:

Bears: BV23, BV20, E51, E50, R30, R02, R00, Colorless Blender

Scarf: R59, R37, R35, R22

Heart: BV20, B000, Colorless Blender

Hope you like it!

Merry Christmas and A Happy New Year to everyone!

Most Exciting Moment!!

Dec24

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamps called The Most Exciting Moment – D18035. This image reminds me so much of me and my brothers opening our gifts together every year in front of the Christmas tree.

To create this card I began by making a base of 6″ x 6″ using AC Cardstock – White. Recollections – Journey To The North Pole was cut to be the same size as the base and then adhered to the card using double-sided tape. Tim Holtz Distress Ink – Rustic Wilderness was applied around the outside edges of the card with a sponge dauber. Using my Cuttlebug and My Creative Time -Stitched Squares Inside and Out, I die cut Recollections – Burgundy and Hot Buy Craft Smart – Holiday Glitz Glitter Paper. U-Line double-sided tape was applied to the backs of each of them and they were both popped up onto the centre of the card. Utilizing the Cuttlebug again and Copic Marker X-Press It Blending Card cardstock, the die-cut for the image and frame was cut out with Lea’bilities – Star Christmas Frame. TCW – Stardust Butter – Champagne was applied to the star frame and I set it aside to dry.

With a MISTI, the main image was stamped onto the centre frame die cut using Memento – Tuxedo Black ink. I coloured it in with Copics and then with Scotch tape applied to the back of the image, rejoined it to the star frame. U-Line double-sided tape was added and the finished piece was popped up onto the centre of the card. YNS Gumdrops – Firefly Magic Sparkly Gumdrops and YNS Gumdrops – Firecracker Sparkly were added to the coloured image. Lastly, I placed the sentiment and 3 poinsettias to the card using Holiday Trendz – Foil Stickers – Seasonal Icons.

Card Recipe:

Stamps: The Most Exciting Moment – D18035 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Recollections – Journey To The North Pole (6″ x 6″), Recollections – Burgundy, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: Lea’bilities – Star Christmas Frame (no. 45.0867), My Creative Time -Stitched Squares Inside and Out

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, Cuttlebug, TCW – Stardust Butter – Champagne, Holiday Trendz – Foil Stickers – Seasonal Icons (011-0522), YNS Gumdrops – Firefly Magic Sparkly Gumdrops and YNS Gumdrops – Firecracker Sparkly Gumdrops

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Girl’s Hair: E15, Y38, Y21, YR23

Boys’ Hair: E47, E44, E43

Jeans: B26, B23, B21, W1

Boy’s Sweaters: B18, B16, B14, B12, E74, E71, E70

Scarves and Girl’s Pants: BG09, BG05, B0G02, BG01

Girl’s Sweater, Gift and Baubles: R59, R37, R35

Boots and Teddy Bear: E33, E31, E27, E25, E23

Teddy Bear Box: E25, E23, E21

Puppy: E35, E33, E31

Tree: G99, G21, YG67, YG17

Round Gift Box: BG15, BG13, BG11, RV14, RV13, RV11

Star, Garland, Ribbon: Y28, Y26, Y23

Background and Flooring: YG03, Y01, YG00, E53, E51, E50

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Everything is Magical!

Dec15

Sharing a Christmas card that I made today using KLM Digital Design – Sledding Gnome from the new December 2022 release. This image also comes with 2 more sentiments, “Some people are worth melting for” and “Walking in a Winter WONDERLAND”.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut Lawn Fawn – Let It Shine Snowflakes designer paper to be the same size and adhered it to the base using double-sided tape. The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The printed image was die cut using my Cuttlebug and Die-namics – MFT – Stitched Rec Scallop Frame dies. It was coloured in and then I applied Cosmic Shimmer Fluffy Stuff. DecoArt Glamour Dust was sprinkled over top while it was still wet and then it was heat set with a Marvy Uchida – Embossing Heat Tool to puff up the snow. I applied the snow flakes in the sky using a UNIPosca PC-3M White marker and snow on the ground with Stickles – Diamond in between and on top of the fluffy snow. U-Line double-sided tape was applied to the image after the Stickles was dry and it was popped up onto the base.

Card Recipe:

Stamp and Sentiment:  Sledding Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Let It Shine Snowflakes (6″ x 6″)

Dies: Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860

Miscellaneous: U-Line double-sided tape, Stickles – Diamond, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust, Marvy Uchida – Embossing Heat Tool, UNIPosca PC-3M White marker

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard: E47, E44, E43, E41

Hat and Mittens: BG72, BG57, BG32, BG11

Jeans: B26, B23, B21

Shoes: C9, C7, C5

Shirt: R46, R14, R08

Sled: E39, E37, E35, E34, E31, E30,  C5, C3, C1

Holly: BG99, YG17, YG03, R46

Sky: B02, B01, B00, B000

Snow: BV20, B000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Lighting the Candles!!

Dec7

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamp called Lighting the Candles – D15204. This little angel is helping to light the way to a joyous Christmas for all!

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Doodlebug Design Inc. – Winter Wonderland was cut to the same size and applied directly to the base card using double-sided tape. I cut a piece of Recollections – Burgundy to the size of 5.5″ x 2″ and from a scrap piece of patterned paper 5.5″ x 1.75″. Double-sided tape was used to attach the 2 pieces together. These were attached to the base card using double-sided tape.

With my Cuttlebug, I die-cut Crafter’s Companion – Luxury Cardstock – Ice Blue Pack and Copic Marker X-Press It Blending Card cardstock with Creative Expressions by Sue Wilson – Festive Collection – Holly Lattice Frame. U-Line double-sided tape was attached to the larger die-cut and it was popped up onto the centre of the card.

The image was stamped onto the the smaller die-cut using Memento – Tuxedo Black ink, MISTI and Dreamerland Crafts – Lighting the Candles stamp. It was coloured in with Copic markers and Stickles – Star Dust was added to the snow on the ground. For the sky, UNIPosca PC-3M White marker was used for the small snowflakes. Dress It Up – Holiday Collection – Itty Bitty Snowflakes and Dress It Up – Holiday Collection – It’s Cold Outside buttons were placed over top of the images’ snowflakes with liquid glue after I had removed the backing from them. Wink of Stella – Clear was applied to the wings to make them sparkle. I added U-Line double-sided tape to the back of the completed image and popped it up onto the centre of the card.  To complete the card, I placed a PinkFresh Glitter Drops – Lagoon in each corner.

Card Recipe:

Stamp: Lighting the Candles – D15204 – Dreamerland Crafts

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″), Recollections – Burgundy

Die Cuts: Creative Expressions by Sue Wilson – Festive Collection – Holly Lattice Frame – CED3125

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cuttlebug, PinkFresh Glitter Drops – Lagoon, Dress It Up – Holiday Colllection – It’s Cold Outside, Dress It Up – Holiday Collection – Itty Bitty Snowflakes, UNIPosca PC-3M White marker, Wink of Stella – Clear

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43, E42

Dress: BG09, BG05, BG02, BG01

Wings: BG0000, BG000, BV0000, Y00

Wreath: G99, G29, G28, G24, G21, YG67, YG17, R59, R39, R37

Candle: RV14, RV13, RV11, YR12, Y08, R24

Sky: B05, B04, B02, B01

Shadows in Snow: BV20, B0000, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Let Your Voice Sing!!

Nov30

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamps called Let Your Voice Sing – D15205 for the main image and Sentiment – Holiday Sentiments 003 – DS163003. Growing up we always had so much fun gathering with friends and family and singing Christmas carols.

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Recollections – Matte Gold Foil cardstock was cut to be the same size as the base and then adhered to the card using double-sided tape. Using my Cuttlebug and Hammermill – Premium Colour 100 lb. cardstock, I embossed the music design with a Cuttlebug – ProvoCraft – Allegro embossing folder. I cut it down to the size of 5.25″ x 4″ and adhered it directly to the base card.

Utilizing the Cuttlebug again and Copic Marker X-Press It Blending Card cardstock, the die-cut for the image was cut out with Spellbinders – Elegant Ovals. With a MISTI, the main image was stamped onto the die cut. It was coloured in and then a Sharpie – Gold Medium Point – Water Based Paint pen was used to colour in the fancy border surrounding the image. The sentiment was stamped with my MISTI and VersaMark ink. Ranger Super Fine Gold Embossing powder was applied to the ink and then heat embossed using a Marvy Uchida – Embossing Heat Tool. I fussy cut around the sentiment. U-Line double-sided tape was applied to the sentiment and coloured image and they were both popped up onto the card. To finish the card off, I applied Dress It Up – Glitter Holly buttons with liquid glue from their Holiday Collection.

Card Recipe:

Stamps: Let Your Voice Sing – D15205 – Dreamerland Crafts

Sentiment: Sentiments – Holiday Sentiments 003 – DS163003 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Matte Gold Foil cardstock

Die Cuts: Spellbinders – Elegant Ovals (S4-425)

Embossing Folder: Cuttlebug – ProvoCraft – Allegro

Embossing Powder: Ranger Super Fine Gold

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, Cuttlebug, Sharpie – Gold Medium Point – Water Based Paint, Dress It Up – Glitter Holly

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R24, R22, R20

Hair: E15, Y38, Y21, YR23

Robe: B18, B16, B14, B12

Wings: BV20, C1, BG0000, B0000, BV0000, YG0000, V0000, Colorless Blender

Music Book: YR30, Y000

Shadow: C1, C0, C00, B60, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Holiday Wishes!!

Nov23

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamps called Holiday Wishes – D18031.  May all of your holiday wishes come true this season for you and your loved ones!

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Recollections – Stardust Christmas paper was cut to be the same size as the base and then adhered to the card using double-sided tape. Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper was cut to 5.5″ x 1.25″ x 5.5″ x .75″. With my hands I tore along the top of both pieces to give the snow some texture. I applied double-sided tape to the larger piece and adhered it directly to the card. U-Line double-sided tape was applied to the smaller piece and it was popped up over top of the larger piece.

The base card was placed into my MISTI and the sentiment from Kraftin’ Kimmie Stamps – The Magic of Christmas was stamped onto it using VersaMark ink. Recollections Detail Embossing Powder – Silver was applied over top of the ink and then heat embossed using a Marvy Uchida – Embossing Heat Tool. I removed this from the MISTI and stamped the main image with Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card cardstock. The image was coloured in and then fussy cut. With a black marker, I inked around all of the edges and then added U-Line Double-sided tape to the back of the image and popped it up onto the card and snow. Cosmic Shimmer Fluffy Stuff was placed under the couple’s boots and then heat embossed using a Marvy Uchida – Embossing Heat Tool to puff it up. Stickles – Diamond was then added over top of the fluffy snow to create more sparkle. Finally, to complete the card, Stickles – Crystal was applied to the centre of the stars in the sky.

Card Recipe:

Stamps: Holiday Wishes – D18031 – Dreamerland Crafts

Sentiment: Kraftin’ Kimmie Stamps – The Magic of Christmas

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Recollections – Stardust Christmas (12″ x 12″)

Embossing Powder: Recollections Detail Embossing Powder – Silver

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, Cuttlebug, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond, Stickles – Crystal

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R22, R20

Hair: E47, E44, E43, E15, Y38, Y15, YR21

Jeans: B26, B23, B21

Girl’s Hat and Scarf and Boy’s Sweater: G99, YG67, YG17

Girl’s Coat and Boy’s Hat and Scarf: R59, R37, R35

Boy’s Jacket and Boots: E29, E27, E25, E23, E21

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Meowy Christmas!

Oct30

It’s the last day of the 2022 Cat Lovers Hop and today I’m sharing a Christmas card I made using Gerda Steiner Designs –  Deck The Halls – GSD438. I thought this image was adorable! Have fun hopping everyone!

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using Wild Rose Studio – Winter Bauble Paper and adhered it directly to the base using double-sided tape. Using Tim Holtz Distress Inks – Tumbled Glass and a finger dauber, I inked around all of the edges of the card. With my Cuttlebug and Hero Arts – Infinity Dies – Ornaments, I die cut a large ornament from Copic Marker X-Press It Blending Card cardstock and the ribbon and topper from a scrap piece of gold cardstock.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock and with Versafine – Majestic Blue, I stamped the sentiment onto the base card. I embossed the sentiment with Ranger – Clear Super Fine Detail embossing powder and then heat set it with a Marvy Uchida – Embossing Heat Tool. The image was coloured in with Copic markers and with a Gelly Roll Sakura #8 Pen designs were added to the ornaments and light bulbs. I tried to create the ornament as close to the paper as I could. Once this was completed, using liquid glue, I attached the top piece and the bow to the ornament. U-Line double-sided tape was added to the back of ornament die cut and it was popped up onto the background. With a Gelly Roll Sakura #8 Pen, I added in some string for the bauble.

Card Recipe:

Stamp and Sentiment:  Deck The Halls – GSD438 – Gerda Steiner Designs

Inks: Memento – Tuxedo Black, Versafine – Majestic Blue, Tim Holtz Distress Inks – Tumbled Glass

Die Cuts: Hero Arts – Infinity Dies – Ornaments (D1400)

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Wild Rose Studio – Winter Bauble Paper (6″ x 6)

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Miscellaneous: U-Line – 2-sided tape, Gelly Roll Sakura #8 Pen, MISTI (Most Incredible Stamping Tool), Marvy Uchida – Embossing Heat Tool,

Image coloured with Copic Markers:

Kitten: T9, T7, T5, T3, R30, R22

Large Ornament: BG09, BG05, BG02, BG01, Y11, Y00, YG00, Gelly Roll Sakura #8 Pen

Baubles: BV11, BV02, BV00, BV000

Lights and Wire Cord: R14, RV42, G07, YG07, YG01, B06, B04, B000

Hope you like it and have a great week!

Also entered into:

https://gsd-stamps.com/blogs/share-your-designs/play-along-in-november-22-challenge

 

Paw-sitively Good!

Oct29

It’s day 5 of the 2022 Cat Lovers Hop and today I’m sharing a Christmas card I made using Your Next Stamp –  Meowy Christmas – CYNS681. Having so much fun with this amazing hop and look forward to it every year.

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using My Favourite Things – Pawsome Prints paper and adhered it directly to the base using double-sided tape. Using my Cuttlebug, Creative Expressions – Festive Collection – Bold Snowflake Frame dies and Recollections – Blue Hues Shimmer Cardstock, I cut out the large snowflake and frame. Using some scrap dark blue paper, I die cut the large outline. I tore along the top of a small piece of Recollections – Christmas Inkjet Printable Glitter Paper and then die cut it with the larger cirlce die from the same die set. Using Tim Holtz Distress Ink – Faded Jeans and a finger dauber, the edges were inked all around the base card. With liquid glue, I attached the large snowflake to the background border. I then attached the snow piece that I had cut previously with liquid glue as well. Then, using a Gelly Roll Sakura #10 Pen, I coloured in some snow in the sky.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then I fussy cut around it. I added some U-Line double-sided tape to the image and popped it up into centre of the circle. The shadow was added using B52. The sentiments were both stamped onto the dark blue paper with VersaMark ink and then embossed with Ranger Embossing Powder White – Extra Fine Detail. I cut out the larger sentiment with my cutter and the smaller one using my Cuttlebug and Gina K Designs – Sentiment Strips. I attached U-line double sided tape the sentiments and coloured image frame and popped up everything onto the card base.

U-Line double-sided tape was applied to the backs of three Creative Impressions – Brads – Snowflake – Winter with a double layer. They were all popped up onto the card and then YNS Gumdrops – Firefly Magic Sparkly Gumdrops were applied to the centres to finish the card off.

Card Recipe:

Stamp and Sentiment:  Meowy Christmas – CYNS681 – Your Next Stamp

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Faded Jeans

Die Cuts: Creative Expressions – Festive Collection – Bold Snowflake Frame (CED3077), Gina K Designs – Sentiment Strips

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., My Favourite Things – Pawsome Prints (6″ x 6″), Recollections – Blue Hues Shimmer Cardstock (8.5″ x 11″), Dark Blue paper, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line – 2-sided tape, YNS Gumdrops – Firefly Magic Sparkly Gumdrops, MISTI (Most Incredible Stamping Tool), Creative Impressions – Brads – Snowflake – Winter, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Cat and Envelope: T9, T7, T5, T4, T3, T1, R21, C1, C0, Colorless Blender

Halo: Y08, Y04

Shadow: B52

Hope you like it and have a great week!

Also entered into https://blog.yournextstamp.com/challenge-191-midnight-comment-for-the-chance-to-win/

 

Making Beautiful Music!!

Oct19

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamps called Making Beautiful Music – D152002. This little angel is so sweet and is spreading Christmas cheer to everyone early this year.

To create this card I began by making a base of 5.5″ x 5.5″ using AC Cardstock – White. AC – Christmas Cardstock – Green was cut to be the same size as the base and then adhered to the card using double-sided tape. The frame was created using Couture Creations – Go Power and Emboss die-cutting machine, Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel die and Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper. I applied liquid glue to the back of this piece and then adhered it to the card.

With my Cuttlebug, I die cut a 3.5″ x 3.5″ square using My Creative Time -Stitched Squares Inside and Out and Copic Marker X-Press It Blending Card cardstock. The main image was stamped using my MISTI and Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I cleaned off the angel and then stamped in place again using VersaMark ink for the snowflakes. Ranger Embossing Powder White – Extra Fine Detail was applied to the image and then heat embossed with a Marvy Uchida – Embossing Heat Tool. I coloured in the image and then added some sparkles onto the dress using a Gelly Roll Sakura #8 Pen. Sparkle was added to wings with Clear – Wink of Stella. To make the snowflakes a little brighter and to add some smaller snowflakes in the sky, I used a white Gelly Roll Sakura #10 Pen. I created a small mixture of FolkArt – Extreme Glitter Acrylic Paint, DecoArt Glamour Dust, Delta Ceramcoat – White onto an acrylic block and with a paint brush added in the snowy background along the bottom of the square. Using a small Stylus, I added in a few more sparkly snowflakes and sprinkled DecoArt Glamour Dust over them while they were still wet. This was then put aside to dry.

Using my Cuttlebug, I die cut 6 petals and 7 leaves out of scraps of paper using Spellbinders – Holiday Flower & Greenery dies. Liquid glue was used to attach the petals together and the I added U-Line double-sided tape and some liquid glue to the bottoms of them to attach them to the card. I trimmed the leaves and with a small amount of liquid glue applied to the tips of the leaves, I adhered them to the card under the flowers. PinkFresh Studio – Essentials Jewel Mix yellow jewels were glued to the centre of each flower. Using my Cuttlebug once again, I die cut 2 sentiments using Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel die with some scrap gold paper. The oval was die cut using Creative Expressions – Frames and Tags – Charlotte dies and a scrap piece of AC – Christmas Cardstock – Burgundy. I glued the 2 sentiments on top of each other to give it some dimension and then attached the sentiment to the oval. U-Line double-sided tape was added to the back of the finished image and it was popped up onto the centre of the card. U-Line double-sided tape was applied to the oval and it was popped up onto the top of the card to finish it off.

Card Recipe:

Stamps: Making Beautiful Music – D152002 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, AC – Christmas Cardstock, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: Creative Expressions – Frames and Tags – Charlotte (CED4319), Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel – CED3073, Spellbinders – Holiday Flower & Greenery (S1-099), My Creative Time -Stitched Squares Inside and Out

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, PinkFresh Studio – Essentials Jewel Mix, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen, Cuttlebug, Clear – Wink of Stella

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R22, R20

Hair: E47, E44, E43, E41

Dress: R59, R37, R35, R21, C1, Gelly Roll Sakura #10 Pen

Wing: BG0000, BG000, B0000, Y000, RV0000, Clear – Wink of Stella

Flower: R59, R37, R35, R21, Y35

Horn: E15, YR24, Y35, Y08

Background Sky: B02, B01, B00, B000

Snow: FolkArt – Extreme Glitter Acrylic Paint, DecoArt Glamour Dust, Delta Ceramcoat – White

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Dance With Me!!

Sep5

Today, I’m sharing a card that I made using Dreamerland Crafts stamps called Just Dance With Me – DCS17037. Sometimes just dancing with our partners or friends can bring such joy to us. No matter where you may be, just hear the music and dance no like no one is watching!

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. The sky was created using Lawn Fawn Cuts – Cloudy Stencil, a  blender brush and Tim Holtz Distress Inks – Salty Ocean and Broken China. To create the grass, I first cut 2 pieces of DCWV – Pocket Blossom designer paper to the sizes of 5.5″ x 2.5″ and 5.5″ x 1-5/8″.  Lawn Fawn – Grassy Hillside Borders die cuts and my Anna Griffin Empress Mini Cutting Machine were used to die cut the 2 pieces. Using a blender brush and Tim Holtz Distress Ink – Rustic Wilderness, I inked over top of the blades of grass and then around the other 3 edges.

The main image was stamped using my MISTI and Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I coloured in the image and then fussy cut around it leaving a slim white border. U-Line double-sided tape was added to the back of the image. I then placed the image onto the card before removing the tape backing to see where to place the sentiment. Using my MISTI again and Versa Fine – Onyx Black ink, I applied the sentiment onto the base card. Ranger – Clear Super Fine Detail embossing powder was then applied to it and it was heat embossed with Marvy Uchida – Embossing Heat Tool.

The final pieces of the card were now ready to assemble. I peeled off the tape backings from the large die-cut and added some liquid glue to allow me to move it into the correct position over top of the grass I had placed down earlier onto the base card. After popping up the top grass cut, I then repeated the same process and popped up the image in between the blades of grass. Finally, I added in some butterflies from the same stamp set using Tim Holtz Distress Ink – Wilted Violet. I had made them lighter by first stamping off of the page and then onto the card.

Card Recipe:

Stamps: Just Dance With Me – DSC17037 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, Wilted Violet, Salty Ocean and Broken China, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., DCWV – Pocket Blossom – 12″X12″ (30.5cmx30.5cm)

Die Cuts: Lawn Fawn – Grassy Hillside Borders

Stencil: Lawn Fawn Cuts – Cloudy Stencil

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, Anna Griffin Empress Mini Machine, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R30, R20

Hair: E47, E44, E43, E41

Dress: V06, V04, V01, V0000, Gelly Roll Sakura #10 Pen

Shirt: BG72, BG57, BG32, BG11

Jeans: B26, B23, B21

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.