Tag Archive | Copic Marker X-Press It Blending Card

Christmas Cheer!!

Oct30

Today we are having a sponsor day over at the Passionate Paper Creations & Friends FB group and I’m sharing a snowman card I made using this digital image from Whimsy Stamps – Snowman’s New Hope and clear stamp for the sentiment Dragon Christmas Cheer.

For the base card, I used AC Cardstock – White and cut it and scored it to be 6″ x 6″. The image was printed out using HP High Quality Grayscale onto Copic Marker X-Press It Blending Card. The background paper was cut to the size of 6″ x 6″ using Hot Buy – Recollections – Jewel Tones paper. This was applied directly to the base using double-sided tape. I die cut Doodlebug Design Inc. – Winter Wonderland paper using my Couture Creations – Go Power and Emboss and Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B. This was inked around the edges with Lawn Fawn – Peacock Ink and applied directly over top of the bottom layer using double-sided tape. The circles were cut with my Cuttlebug, various colours from Hot Buy – Recollections – Jewel Tones paper and Copic Marker X-Press It Blending Card using Lifestyle Crafts Cutting Dies – Nesting Circles. I applied the 1st 2 circles with double-sided tape over top of the snowman background.

The image was coloured in with Copic markers. I popped up the image and applied it to to the card using 3M double sided tape. I added snow to the bottom of the snowman using Stickles – Diamond to add texture. The snowy background was created with a Ranger – Emboss It Pen Clear and the sentiment was stamped with Versamark ink. Ranger Embossing Powder White – Extra Fine Detail was applied and heat embossed using Marvy Uchida – Embossing Heat Tool. I fussy cut around the sentiment and it was popped up using 3M double-sided tape onto the card to finish it off.

Card Recipe:

Stamp: Snowman’s New Hope – Whimsy Digital Stamps

Sentiment: Dragon Christmas Cheer Whimsy Clear Stamps

Inks: HP High Quality Grayscale, Lawn Fawn – Peacock Ink, Versamark, Ranger – Emboss It Pen Clear

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Hot Buy – Recollections – Jewel Tones, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″)

Die Cuts: Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B, Lifestyle Crafts Cutting Dies – Nesting Circles

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: Couture Creations – Go Power and Emboss, 3M double-sided tape, Stickles – Diamond, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Snowman: YR18, YR15, YR12, R30, R20, B60, C0, C00, Colorless Blender

Hat and Scarf: B37, B26, B23, B21, B14, B12, BG72, BG57, BG34, BG11

Sky: BG10, BG000, BG0000

Hope you like it and have a great week!

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Whimsy Stamps until Sunday, October 31, 2021.

If you are a member of Passionate Paper Creations & Friends FB group
you can go to the top of the page and get a shopping discount.

 

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Penguin – Thinking of You!!

Oct29

Hi everyone…today we are having a sponsor day over at the Passionate Paper Creations & Friends FB group site with Whimsy stamps!! Sharing a card I made today using this adorable image from Whimsy Stamps – Penguin Thinking of You and for the sentiment Penguins Winter Adventure.

For the base card, I used Hammermill – Premium Colour 100 lb. and cut it and scored it to be 5.5″ x 4.25″. I printed out the image using HP High Quality Grayscale onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then fussy cut around the image and snow. I coloured in the background separately and then splattered some FolkArt – Extreme Glitter Acrylic Paint and Delta Ceramcoat – White onto the background. The background was cut down to 5.25″ x 4″ and was popped up onto the base using U-line double-sided tape. The image was then popped up onto the background using U-line double-sided tape and the sentiment was stamped with VersaMark ink and embossed with Ranger Embossing Powder White – Extra Fine Detail and my Marvy Uchida – Embossing Heat Tool. This was popped up using 3M double-sided tape and applied to the card to finish it off.

Card Recipe:

Stamps and sentiment: Penguin Thinking of You – Whimsy Stamps

Sentiment: Penguins Winter Adventure – Whimsy Stamps

Inks: HP High Quality Grayscale, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: 3M double-sided tape, Stickles – Diamond, FolkArt – Extreme Glitter Acrylic Paint, Delta Ceramcoat – White, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape

Image coloured with Copic Markers:

Penguin: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, R11, RV00, E43, E42, E41, E40

Hat: RV09, RV06, RV04, BG09, BG05, BG02, BG01

Sky and Snow: BV23, BV20, BV00, B97, B95, B63, B60, B45, B41, YG17, YG11, YG03, YG00, RV02, RV00, RV000

Hope you like it and have a great week!

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Whimsy Stamps until Saturday, October 31, 2021.

If you are a member of Passionate Paper Creations & Friends FB group
you can go to the top of the page and get a shopping discount.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Viking Gnome!!

Oct27

Sharing a card I made today using KLM Digital Designs –  Viking Gnome from the new October release. This image also comes with 2 more sayings: “Today is all about you” and “Happy Anniversary”. This card would also be great for a birthday card too!

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. My Creative Time – Rectangle Frame Dies were used to die cut the image. The image was coloured in with Copic markers.  The base was created with Hammermill – Premium Colour 100 lb. cardstock cut and folded to the size of 5.5″ x 4.25″. I attached the background pattern from Doodlebug Design Inc. – Dragon Tails to the base and then inked around the edges of the image and card. Double-sided tape was used to pop-up the finished image to the base card using U-Line double-sided tape.

Card Recipe:

Stamp and Sentiment:  Viking Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Doodlebug Design Inc. – Dragon Tails (6″ x 6″)

Die Cuts: My Creative Time – Rectangle Frame Dies

Miscellaneous: U-Line – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard and Hair: E18, E08, YR18, YR14

Helmet: C5, C3, C2, C1, E53, E51, E50

Clothing: E89, E87, E84

Boots: C9, C7, C5, C0

Axe: C5, C4, C3, C2, C1, E49, E27, E25, E23

Sheild: C5, C3, C1, YG67, YG23, YG17, YG11, G99, G21, G14

Fur: E37, E35, E33

Shadow: C2, C1, C0

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Polar Friends!!!

Oct27

It’s Wednesday, and this week, I made a Christmas card using Polar Friends – TT058 by High Hopes Rubber Stamps for the main image and All Hearts – HDG004 (High Hopes Rubber Stamps) for the sentiment. Sharing Christmas with loved ones is always something to look forward to.

Using My Creative Time – Rectangle Frame Dies and my Cuttlebug, I die cut a 5.25″ x 4″ rectangle from Copic Marker X-Press It Blending Card paper. With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto it. I coloured in the image with Copic markers and then added some snow to the sky using a Gelly Roll Sakura #8 Pen and Sharpie Water Based Paint – White – Extra Fine Point. Stickles – Diamond was added to the ice cubes and Wink of Stella – Clear was applied to the candy cane. Stickles – Star Dust was added to all of the snow. This was then set aside to dry.

Once everything was dry, I popped up the image onto Hammermill – Premium Colour 100 lb. paper cut and folded to 5.5″ x 4.25″ with U-Line double-sided tape. I stamped out the sentiment onto Copic Marker X-Press It Blending Card and coloured in the hearts with Copics and tinted the white paper with Lawn Fawn – Peacock ink. To finish off the card, I popped this up with 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Polar Friends – TT058 (High Hopes Rubber Stamps)

Sentiment: All Hearts – HDG004 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Lawn Fawn – Peacock Ink

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: My Creative Time – Rectangle Frame Dies

Stickles: Star Dust, Diamond

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Gelly Roll Sakura #8 Pen, Sharpie Water Based Paint – White – Extra Fine Point, Wink of Stella – Clear, U-Line double-sided tape, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Polar Bear: B60, BV23, BV20, C1, C00, R30, R20, R02, Colorless Blender

Penguin: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, R11, RV00, E43, E42, E41, E40

Penguin Scarf and Hat: BG72, BG57, BG05, BG11, BG10, BG000, BG0000

Bear Scarf: RV66, RV63, RV55, BG09, BG07, BG02, BG01, B00, B000, B0000

Ice: B60, B000, B0000

Sky: B99, B97, B95, B93, B45, B41, BG45, BG11, BG10, BV25, BV23, BV20, BV04, V04, V01, YG11, RV04, RV63

Snow: BV23, BV20, Colorless Blender, Stickles – Star Dust

Soda: RV66, RV63, RV55, RV52

Candy Cane and Hearts: R59, R37, R35

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Dreams!!

Oct24

Sharing a card I made today using KLM Digital Designs –  Alexbay Lighthouse from the new October release. This image also comes with 2 more sayings: “Today is all about you” and “Happy Anniversary”.

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. My Creative Time – Rectangle Frame Dies were used to die cut the image. The image was coloured in with Copic markers and the clouds were created with Tim Holtz Distress Ink – Salty Ocean and stencils that I created using Avery Elle – Pierced Clouds Dies. Double-sided tape was used to attach it to the base card of Hammermill – Premium Colour 100 lb. cardstock cut and folded to the size of 5.5″ x 4.25″.

Card Recipe:

Stamp and Sentiment:  Alexbay Lighthouse – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time – Rectangle Frame Dies, Avery Elle – Pierced Clouds Die (D-05-01)

Miscellaneous: 3M VHB – 2 sided tape, Picket Fence Studio Blender Brush

Image coloured with Copic Markers:

Lighthouse: R59, R37, R35, C1, C0, Y02, Y00, Y000

Building: R59, R37, R35, C3, C2, C1, C0, E17, E15, E13

Steps: C5, C3, C1

Rocks : E74, E71, E70, W5, W3, W1

Water: BG10, BG02, BG01, BG000, B02, B01, B00, B000

Sky: B000, B0000, Tim Holtz Distress Ink – Salty Ocean

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Believe!!!

Oct19

It’s Wednesday, and this week, I made a Christmas card using Believe Snowman – TFL006 and Snow Globe – ULF002 by High Hopes Rubber Stamps for the main image and North Pole Greetings – GLL005 (High Hopes Rubber Stamps) for the sentiment. It’s time to start believing the magic of Christmas and the joy that it brings to everyone!

To make my card this week, I began with a card base using AC Cardstock – White cut and folded to 6″ x 6″. The snowflake background is from Lawn Fawn – Let It Shine Snowflakes (6″ x 6″) paper pad. I applied this directly to the base using double-sided tape.

Using Lifestyle Crafts Cutting Dies – Nesting Circles and my Cuttlebug, I die cut a 3.75″ circle from Copic Marker X-Press It Blending Card paper. With my MISTI and Memento – Tuxedo Black ink, I stamped the snowman scene image onto it. I coloured in the image with Copic markers and then added some snow to the sky and snowman’s arms using a Gelly Roll Sakura #8 Pen. Sakura Glaze – Black was added to the eyes of the snowman and birds and the snowman’s mouth. With a Ranger – Emboss It Pen Clear, I added some ink to the top of the Snowman’s hat, sign, icicles, tops of the birdhouses and snow drifts and then heat embossed everything with WOW! Sparkling Snow Embossing Glitter and a Marvy Uchida – Embossing Heat Tool. Stickles – Diamond was added as an extra layer to the snow and Wink of Stella – Clear was applied over all the snowman. This was then set aside to dry.

With my MISTI and Memento – Summer Sky ink I stamped the top part of the globe onto Copic Marker X-Press It Blending Card paper. I cleaned off the stamp and this time, I used some Post-it Notes to hide the background inside the globe and inked the braided border for both the top and bottom of the base with Versamark ink. I applied Ranger Super Fine Detail Gold Embossing powder and heat embossed it using a Marvy Uchida – Embossing Heat Tool. With my globe image still in place on my MISTI, I removed the snowglobe stamp and added the sentiment turning up both ends of the stamp slightly to give the words some curvature. The sentiment was stamped using Versamark ink and then Ranger Super Fine Detail Gold Embossing powder was applied to it and then heat embossed using a Marvy Uchida – Embossing Heat Tool. The base was then coloured in using my Copic markers and a Gelly Roll Stardust – Clear pen was used to colour in the white areas to give it some glitter. I also added some of this pen to the tops of the snowman’s arms. With my scissors, I fussy cut around the entire snow globe.

The card was now ready to assemble. I attached 3M double-side tape to pop up the snow globe onto the main background and then added 3M double-sided tape to the back of the circle and centred it on the top part of the globe. Lastly, to finish off the card, I applied some Nuvo Crystal Drops – Caribbean Ocean, Violet Galaxy and Nuvo Glitter Drops – Sherbert Shimmer to some of the snowflakes on the base card.

Card Recipe:

Stamp: Believe Snowman – TFL006 (High Hopes Rubber Stamps), Snow Globe – ULF002 (High Hopes Rubber Stamps)

Sentiment: North Pole Greetings – GL005 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Memento – Summer Sky ink, Versamark

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Lawn Fawn – Let It Shine Snowflakes (6″ x 6″)

Die Cut: Lifestyle Crafts Cutting Dies – Nesting Circles

Stickles: Diamond

Nuvo: Crystal Drops – Caribbean Ocean, Violet Galaxy and Glitter Drops – Sherbert Shimmer

Embossing Powder:Ranger Super Fine Detail Gold Embossing powder, WOW! Sparkling Snow Embossing Glitter

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Cuttlebug, Gelly Roll Sakura #8 Pen, Ranger – Emboss It Pen Clear, Sakura Glaze – Black pen, Gelly Roll Stardust – Clear pen

Image coloured with Copic Markers:

Snowman: B60, C1, C00, Colorless Blender

Hat and Buttons: C10, C8, C6, C4

Arms and Sign: E27, E25, E23, E21

Scarves, Patches, Hat Band: RV66, RV63, RV55, BG09, BG07, BG02, BG01

Bird Houses: RV66, RV63, RV55, BG09, BG07, BG02, BG01, E27, E25, E23, E21

Birds: R46, R14, R08

Sky: B99, B97, B95, B93, B91

Snow: B60, C1, C00, B0000, BG0000, Colorless Blender

Snow Globe: R46, R14, R08

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Toadly Awesome!!

Oct18

Sharing a card I made today using KLM Digital Designs –  Ryan The Frog Catcher from the new October release. This image also comes with 2 more sayings: “You’re unfrogetable” and “Don’t worry, be hoppy”.

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card.  The image was coloured in with Copic markers and then fussy cut and inked around the edges with a black marker. I fussy cut around the sentiment and ran it through my Xyron Create a Sticker. I applied this to some green cardstock and then repeated the process to add it to some more green cardstock. Once again, I fussy cut around it and then added 3M VHB – 2 sided tape to the back of it to pop-it up onto the card later.

For the base card, I used Hammermill – Premium Colour 100 lb. cardstock and cut it and scored it to be 5.5″ x 4.25″. I cut AC – Green Cardstock to the same size as the base and attached it using double-sided tape. For the inside background, I cut Reminisce – The Menagerie – Happy Frogs paper to the size of 5.25″ x 4″, 1 lime green panel – 5.25″ x 2″, 1 darker green panel, 1 medium green panel and 1 lighter green panel to the size of 5.25″ x .5″. I applied some Tim Holtz Distress Ink – Rustic Wilderness using a Picket Fence Studio Blender Brush to the 2″ panel on both of the long sides. Using my Cuttlebug and various scraps of greens and browns, I die cut the grass and cattails using Lawn Fawn – Shadow Box Card Park Add-On, Lawn Fawn – Bayou Backdrop and Lawn Fawn – Meadow Backdrop: Landscape.

The card was now ready to assemble. I attached the smaller patch of grass on the right side of the frog background with glue. Next, I added the 2″ panel on the left size. Using glue, I attached each of the remaining .5″ panels, centering them in between the 2″ green panel. The 2nd layer of grass was attached with glue along the lower edge of the card and then I used scissors to cut off the pieces that were over the edges of the main background piece. I made sure that no glue was added to the tops of the grasses. I pieced the 2 cattails together using glue and then popped up the tops of them with 3M VHB – 2 sided tape. I added some glue and inserted the 1st cattail under the top blades of grass. 3M VHB – 2 sided tape was added to the back of the boy and the net, except for the area behind the shoes and he was inserted under the top blade of grass and in front of the cattail. The other cattail was then applied to the card using 3M VHB – 2 sided tape for the top part of the cattail and glue was added to the remainder of the piece and added to the card. The other 2 darker blades of grass were added with some glue. Lastly, to finish off the card, the popped up sentiment was added.

Card Recipe:

Stamp and sentiment:  Ryan The Frog Catcher – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Reminisce – The Menagerie – Happy Frogs (12″ x 12″), AC – Green Cardstock, Various green cardstocks

Die Cuts: Lawn Fawn – Shadow Box Card Park Add-On, Lawn Fawn – Bayou Backdrop, Lawn Fawn – Meadow Backdrop: Landscape

Miscellaneous: 3M VHB – 2 sided tape, Picket Fence Studio Blender Brush, Gelly Roll Sakura #5 Pen, Xyron Create a Sticker

Image coloured with Copic Markers:

Skin and Mouth: E21, E11, E00, E000, R30, R20

Hair: E47, E45, E43, E41

Overalls: B26, B23, B21

Shirt : YR18, YR16, YR14, Y17, Y15, Y13

Shoes: C8, C6, C4, C2, C1, C00

Toad: G46, G28, Gelly Roll Sakura #5 Pen

Net: G07, G05, YG06, C8, C6, C4

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

So Mushroom In My Heart!!

Oct15

Sharing a card I made today using these adorable images from Sweet Sentiment- Internet Troll. He’s in the mood for love, are you?

For the base card, I used AC Cardstock – White and cut it and scored it to be 6″ x 6″. I die cut Craft Consortium – It’s Snome Time paper and Recollections – Red cardstock using my Couture Creations – Go Power and Emboss and Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B. The grass was cut with the same cutting machine, green cardstock and Lawn Fawn – Simple Grassy Hillsides die cut. I ran the grass through the die cut machine again using the same size square that I had used for the smaller mushroom background. Tim Holtz Distress Ink – Pine Needles was applied around the edges of the smaller mushroom square. Using double-sided tape, I applied the larger mushroom background directly to the base card. The lawn was layered and applied to the small mushroom square. The red square and smaller mushroom square were both applied to ivory cardstock using double-sided tape. Using my cutter, I cut around the edges leaving a small border. The red and ivory square were then applied directly to the base background using double-sided tape. The mushroom square, grass, ivory square combo were popped up onto the red square using 3M double-sided tape.

Copic Marker X-Press It Blending Card was used for the images and sentiment. The images were coloured in with Copic markers. I fussy cut around all of the images and sentiment and inked around the sentiment with Tim Holtz Distress Ink – Pine Needles. Using glue, I adhered the images to the mushroom background and in between the grass. The sentiment was popped up using 3M double-sided tape onto the card to finish it off.

Card Recipe:

Stamps and sentiment: Internet Troll – Sweet Sentiments

Inks: Tim Holtz Distress Ink – Pine Needles

Paper: Copic Marker X-Press It Blending Card, Craft Consortium – It’s Snome Time (6″ x 6″), Recollections – Red, Ivory cardstock, AC Cardstock – White

Die Cuts: Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B, Lawn Fawn – Simple Grassy Hillsides

Miscellaneous: Couture Creations – Go Power and Emboss, 3M double-sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20, R01, R00, R000

Eyes: YG67, YG63, YG61,

Hair: C5, C3, C1

Clothing: B26, B23, B21, E43, E42, E41

Hat and Patch: BG72, BG57, BG32, BG11

Walking Stick: E49, E37, E35, E34

Mushrooms: E42, E40, E09, E08, E0000, BV31, R08

Hope you like it and have a great week!

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Sweet Sentiment until Saturday, October 16, 2021.

If you are a member of Passionate Paper Creations & Friends FB group
you can go to the top of the page and get a shopping discount.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Confirmation!!

Oct13

Sharing a CAS card I made today using KLM Digital Designs –  Confirmation Cross from the new October release. This stamp also comes with 2 other sayings, “For Your Confirmation” and “Confirmation”.

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. Using my Couture Creations – Go Power and Emboss and Gina Marie Designs – Loopy Rectangle Die Set, I die cut the image and sentiment. The image was coloured in with Copic markers.  Hammermill – Premium Colour 100 lb. cardstock was used for the base, cut and scored to be 5.5″ x 4.25″. Using 3M double-sided tape, I adhered the die cut to the base.

Card Recipe:

Stamp and sentiment:  Confirmation Cross – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: Gina Marie Designs – Loopy Rectangle Die Set

Miscellaneous: 3M – 2 sided tape, Couture Creations – Go Power and Emboss

Image coloured with Copic Markers:

Cross: E49, E27, E25, E23

Flame: R24, YR16, YR14, YR12, Y08

Dove: B60, C00, Colourless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Brrr!!!

Oct13

It’s Wednesday, and this week, I made a Christmas card using Havin’ A Ball Snowman – S147 by High Hopes Rubber Stamps for the main image and Brr… – FDG004 (High Hopes Rubber Stamps) for the sentiment. Brr…. – Winter is coming soon!

To make my card this week, I began with a card base using Hammermill – Premium Colour 100 lb. cut to 4.25″ x 5.5″. I cut out the background from Heartfelt Creations – Merry and Bright Collection and sized it to 4″ x 5.25″. Adding double-sided tape, I adhered this to some yellow cardstock. I cut around the yellow cardstock and left a very thin border. Lastly, I applied some double-sided tape and glue and attached it to the base.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image and sentiment onto Copic Marker X-Press It Blending Card. I coloured in the image and sentiment with Copic markers. I ran the sentiment through my Xyron Create a Sticker and then I fussy cut around the image and the sentiment. Using a black pen, I outlined all of the edges for the image and sentiment, except in the snowy area. I peeled off the backing to the sentiment pieces and adhered them to the card front. I glued the snowman image in place at the bottom of the cut out background. I applied Stickles – Sea Glass to the Sweater cuffs and trim and a little bit in the snow at the bottom of the snowman. Stickles – HIbiscus was applied to the hat trim and pom pom. Stickles – Diamond was added to the snowballs and Stickles Crystal, Diamond and Stardust were all added to the snow to finish off the card.

Card Recipe:

Stamp: Havin’ A Ball Snowman – S147 (High Hopes Rubber Stamps)

Sentiment: Brr… – FDG004 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb. cardstock, Heartfelt Creations – Merry and Bright Collection, Yellow Cardstock

Stickles: Sea Glass, Hibiscus, Crystal, Diamond, Stardust

Tools: MISTI – Most Incredible Stamping Tool, Xyron Create a Sticker

Image coloured with Copic Markers:

Snowman and Snowballs: B60, C1, C00, R30, R20, YR18, YR15, YR14, E27, E25, E23

Hat and Scarf: RV66, RV63, RV55, Y17, Y15, Y13

Sweater: B04, B02, B01, B00

Boots: RV66, RV63, RV55, B04, B02, B01, B00, C7, C5, C3, C1

Sentiment: RV66, RV63, RV55, Y17, Y15, Y13, B04, B02, B01, B00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Moo-rry Christmas!!!

Oct6

It’s Wednesday, and this week, I made a Christmas card using Chillin’ Charlie – TT049 by High Hopes Rubber Stamps for the main image and Moo-rry Christmas – FDG002 (High Hopes Rubber Stamps) for the sentiment. It’s beginning to look a lot like Christmas release is being celebrated this month at High Hopes Rubber Stamps.

To make my card this week, I began with a card base from Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards). I cut Crafter’s Companion – Luxury Cardstock – Navy Blue paper to the size of 3-5/8″ x 4-5/8″. The 3.5″ x 4.5″ background was cut from Heartfelt Creations – Festive Winterscapes Collection. I inked around the edges of the base card and background image with Tim Holtz Distress Ink – Faded Jeans. The sentiment was added to the base card using Versa Fine – Onyx Black ink and my MISTI. The ink was embossed using my Marvy Uchida – Embossing Heat Tool and Ranger – Clear Super Fine Detail embossing powder. I applied the 2 cut pieces together using double-sided tape and then popped them onto the base using 3M  double-sided tape. I had some branches pre-punch from earlier from various green cardstock using my Martha Stuart – Branch punch. I applied liquid glue to the backs of each of the branches and applied them to the popped up background.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers and then I fussy cut around it. For the hat trim and pop-pom, I used Ranger – Emboss It Pen Clear and sprinkled on some WOW! Sparkling Snow Embossing Glitter. I heated this with my Marvy Uchida – Embossing Heat Tool and then repeated the process to give it more texture. The image was popped up onto the background using 3M double-sided tape and a few small Ranger Snowflakes were added. Lastly, I added some Stickles – Diamond to the snowflakes on the background and in the centres of the smaller snowflakes to complete my card.

Card Recipe:

Stamp: Chillin’ Charlie – TT049 (High Hopes Rubber Stamps)

Sentiment: Moo-rry Christmas – FDG002 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Faded Jeans, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards), Crafter’s Companion – Luxury Cardstock – Navy Blue, Heartfelt Creations – Festive Winterscapes Collection

Die Cut: Martha Stuart – Branch punch

Embossing Powder: WOW! Sparkling Snow Embossing Glitter

Tools: MISTI – Most Incredible Stamping Tool, 3M – 2 sided tape, Marvy Uchida – Embossing Heat Tool, Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen, Ranger – Emboss It Pen Clear, Ranger Snowflake Glitter

Image coloured with Copic Markers:

Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen

Cow: C8, C6, C4, C3, C1, C00, B60, R30, R20, R00, R000, E95, E93, E53, E51, E50

Santa Hat: R59, R37, R35, WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff

Collar, Holly and Bell: G43, G29, G28, H 14, YG23, YG03, E15, YR24, Y35, Y08

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Time to Celebrate!!

Oct4

Today, I’m sharing a Christmas card using Dreamerland Crafts stamps called Let’s Celebrate – D19074 for the main image and Christmas Snow Scene – M18313 for the background. For the sentiment, I used Holiday Sentiments Set 001 – D163001. 

 

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. My Cuttlebug and My Creative Time – Rectangle Frame Layers Die were used to die-cut Copic Marker X-Press It Blending Cardstock. Using the background stamps, I stamped the background using my MISTI and Memento – Summer Sky ink. I coloured in the sky, trees and house with Copic markers and then added some snow using Gelly Roll Sakura #8 Pen. Once this was done, I added Gina K Designs – Glitz Glitter Gel – Iridescent to the remainder of the die cut for the sparkling snow. I added a little bit more where the boys feet would land and set it aside to dry. Once again, I used my MISTI and Memento – Tuxedo Black ink and stamped the main images. I coloured them in with Copic markers and then applied Ranger – Emboss It Pen Clear to the fur trims for the hats and clothing. I applied WOW! Sparkling Snow Embossing Glitter to the inked areas and then heat embossed everything with my Marvy Heat Embossing Tool. For the pompoms, I applied Cosmic Shimmer Fluffy Stuff and then heat embossed the liquid for it to puff up. For the present, I added some gold swirls using a Pental Sunburst Metalic Med Gel Pen. Then I fussy cut around the images leaving a thin white border. I stamped the sentiment using my MISTI and Lawn Fawn – Peacock Ink on to the base card. Then I stamped it again, this time using Versamark ink and then added Ranger – Clear Super Fine Detail embossing powder and heat embossed it.

The card was now ready to assemble. Using double-sided tape, I attached the background to the scalloped border. I added 3M double-sided tape to the back of the scalloped border and popped it up onto the base card. Using 3M double-sided tape, I popped up the main image and present onto the background. A little more of the Stickles – Diamond was added to snow where his feet are to complete the card.

Card Recipe:

Stamps: Let’s Celebrate – D19074 – Dreamerland Crafts, Christmas Snow Scene – M18313 – Dreamerland Crafts

Sentiment: Holiday Sentiments Set 001 – DS163001 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark, Lawn Fawn – Peacock Ink, Memento – Summer Sky ink

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy – Recollections – Jewel Tones

Die Cuts: My Creative Time – Rectangle Frame Layers, Gina Marie Designs – Nested Scalloped Stitched Rectangles

Stickles: Diamond

Embossing Powder: WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff, Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug,  Marvy Heat Embossing Tool, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #5 Pen, 3M VHB – 2 sided tape and Pental Sunburst Metalic Med Gel Pen

Image coloured with Copic Markers:

All Eyes and Small Noses:  Sakura Glaze – Black pen, Gelly Roll Sakura #5 Pen

Skin: E21, E11, E00, E000, R30, R22, R20

Hair: E47, E44, E43

Clothing and Hat: B37, B14, B12

Mitts: YG67, YG63, YG61

Boots: C8, C6, C4, C2, C1

Bear: E57, E55, E53, E51

Pig: E95, E93, R00, R000

Rabbit: C2, C1, C00, R30, R20

Present and Bow: BG09, BG05, BG02, BG01, E15, Y38, Y15, Y08

House: E40, E41, E30, E18, E15, Y04

Trees: G99, G21, YG67, YG17

Sky: B04, B02, B01, B00

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Open If You Dare!!

Sep30

Sharing a Hallowe’en card I made today using these adorable images from 2CuteInk – Hallowe’en Animals Digital Stamp Set. Hallowe’en is one of my favourite times of the year when we get to see all of the little one’s all dressed up and having fun!

For the base card, I used Hammermill – Premium Colour 100 lb. and cut it and scored it to be 8.25″ x 3.25″. I die cut Stampin’ Up – Magic in this Night Designer Series Paper using my Couture Creations – Go Power and Emboss and Whimsy Stamps – Slimline Pillows Die – WSD473. This was used for the main background. I used the same die-cut again for the inserts, only this time I used Doodlebug Design Inc. – Ghost Town paper and also die-cut the sentiment. I glued the main background to the base and used Tim Holtz Distress Inks – Dusty Concord to ink around all of the outside edges and around each of the shapes. For the sentiment, I used my Blending brushes and Tim Holtz Distress Ink – Twisted Citron to colour it and ink around the edges. Each of the shapes were glued and placed into their corresponding places.

The images and sentiment were imported into Microsoft Word and then printed out onto onto Copic Marker X-Press It Blending Card using my printer and HP Printer High Quality Grayscale for the setting. This prevents them from smearing when colouring. My Brother Scan and Cut was used to die cut the images leaving a small white border. The images were coloured in with Copic markers and then popped up using 3M double-sided tape onto the card.

Card Recipe:

Stamps and sentiment: Hallowe’en Animals Digital Stamp Set – 2CuteInk

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Inks – Dusty Concord, Tim Holtz Distress Ink – Twisted Citron

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Stampin’ Up – Magic in this Night Designer Series Paper (12″ x 12″), Doodlebug Design Inc. – Ghost Town (6″ x 6″)

Die Cuts: Whimsy Stamps – Slimline Pillows Die – WSD473

Miscellaneous: Couture Creations – Go Power and Emboss, Brother Scan and Cut

Image coloured with Copic Markers:

Giraffe Mummy: E79, E77, E74, Y38, YR31, YR000, C1, C00

Vampire Pig: E95, E93, R01, R00, R000, E79, E77, E74, C8, C6, C4, R59, R39, R29, V17, V15, V12

Alligator Witch: C8, C6, C4, YG67, YG63, G43, G24, V17, V15, V12, Y38, YR31, Y23, Y21

Frankenstein Hippo: W5, W3, W1, YG67, YG63, G43, G24, C7, C4, R01, B26, B23, B21

Hope you like it and have a great week!

Come and check us out on Passionate Paper Creations & Friends FB group as we are currently sponsoring 2CuteInk.

If you are a member of Passionate Paper Creations & Friends FB group
you can go to the top of the page and get a shopping discount.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Santa’s New Ride!!!

Sep29

It’s Wednesday, and this week, I made a Christmas card using Flyin’ High Santa – T093 by High Hopes Rubber Stamps for the main image and Here Comes Santa Claus – G272 (High Hopes Rubber Stamps) for the sentiment. Santa’s giving his reindeer a rest this year as he checks out his new ride. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut the background paper from Creative Memories – Glacier Paper Pack to be the same size and applied this directly to the base card using double-sided tape. I took a small scrap of Recollections – Black cardstock and ran it through my Xyron Create a Sticker so that it would become a sticker. With my Cuttlebug and Joy Crafts – Lin & Len Design 1201/0027, I die cut the silhouette out of the black paper and then peeled off the backing and placed it directly to the bottom of the card. Stampendous – Snowflakes – Chunky White was sprinkled over top of the card and melted from the bottom of the card using my Marvy Uchida – Embossing Heat Tool.

With my MISTI and Memento – Tuxedo Black ink, I stamped both the image and the sentiment onto Copic Marker X-Press It Blending Card. I cut the sentiment in half using my cutter and ran it through the Xyron Create a Sticker. I placed the sticker on top of some Recollections – Black cardstock and cut it again using my small cutting tool. I coloured in the image with Copic markers and then I fussy cut around it. With a Gelly Roll Sakura #8 Pen, I coloured in the candy cane swirls on the airplane and small circles. Once it was dry, I used Gelly Roll Stardust – Clear to go over the big yellow gumdrop, the swirls on the propeller, the candy cane swirls, small circles on the plane and the star on the tree to add some glitter. For Santa’s cuffs, coat trim and hat, I used Ranger – Emboss It Pen Clear and sprinkled on some WOW! Sparkling Snow Embossing Glitter. I heated this with my Marvy Uchida – Embossing Heat Tool and then repeated the process to give it more texture. For Santa’s pop pom, I applied a little bit of Cosmic Shimmer Fluffy Stuff and then heat embossed it with my Marvy Uchida – Embossing Heat Tool.

The Santa image and sentiment were both popped up onto the background using 3M double-sided tape to complete the card.

Card Recipe:

Stamp: Flyin’ High Santa – T093 (High Hopes Rubber Stamps)

Sentiment: Here Comes Santa Claus – G272 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Creative Memories – Glacier Paper Pack (12″ x 12″), Recollections – Black cardstock

Die Cut: Joy Crafts – Lin & Len Design 1201/0027

Embossing Powder: WOW! Sparkling Snow Embossing Glitter, Stampendous – Snowflakes – Chunky White

Tools: MISTI – Most Incredible Stamping Tool, 3M – 2 sided tape, Gelly Roll Stardust – Clear, Xyron Create a Sticker, Cosmic Shimmer Fluffy Stuff, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #8 Pen, Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen, Ranger – Emboss It Pen Clear

Image coloured with Copic Markers:

Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen

Skin: E21, E11, E00, E000, R30, R20

Beard: C1, C0, C00, Colorless Blender

Santa Hat, Clothing, Mitts: R59, R37, R35, YG67, YG63, YG61, WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff

Airplane: R29, R27, R22, R17, G14, YG23, YG01, BG0000, C5, C3, C2, C1, C0, C00, Colorless Blender, Gelly Roll Stardust – Clear

Star and Present Bow: Y17, Y13, Y04, BG07, BG05, BG02, BG01, Gelly Roll Stardust – Clear

Christmas Tree, Propeller and Leaves: G14, YG23, YG01, Y17, Y13, Y04, Gelly Roll Stardust – Clear

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Moo-Chas Grass-ius!!

Sep27

Sharing a card I made today using KLM Digital Designs –  Udderly Fun from the new September release. This stamp also comes with 2 other fun sayings, “Have a moo-tiful day” and “Your Moo-velous!”

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and My Creative Time – Rectangle Frame Die Layers, I die cut the image and then coloured it in with Copic markers leaving a thin white border from the dotted line. Using My Creative Time – Rectangle Frame Dies, I die cut black cardstock to create a border for the image and put them together using double-sided tape. The larger dies from this same set were used to die cut the background from Doodle Bug Designs Inc. – Down on the Farm paper.

I die-cut the sentiment using Whimsy Stamps – Quick Strips Die Set. Then, I traced around the outer edge of the die with a coloured pencil onto black cardstock so that I could see the lines. I used my cutter and scissors to create a smaller outer border for the sentiment.

For the base card, I used Hammermill – Premium Colour 100 lb. cardstock and cut it and scored it to be 5.5″ x 4.25″. Using double-sided tape, I adhered the patterned paper directly to the base and inked around the edges using Tim Holtz Distress Ink – Black Soot. The sentiment was added to the black cardstock die cut using double-sided tape. I added some 3M – 2 sided tape to the backs of the image and sentiment and they were both popped up on top of the base to complete the card.

Card Recipe:

Stamp and sentiment:  Udderly Fun – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Black Soot

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Doodle Bug Designs Inc. – Down on the Farm – 6″ x 6″ paper pad

Die Cuts: Whimsy Stamps – Quick Strips Die Set – WSD330, My Creative Time – Rectangle Frame Die Layers, My Creative Time – Rectangle Frame Dies

Miscellaneous: 3M – 2 sided tape

Image coloured with Copic Markers:

Cow: E95, E93, E42, E41, E40, E34, E33, E31, R02, R00, C8, C6, C4, C1, C0, C00

Bonnet: V17, V15, V12

Flowers and Leaves: YG17, YG03, Y38, Y19, Y17, Y15, Y13, E18, E15

Grass: G14, YG23, YG11

Sky and Clouds: B60, B01, B00, B000, B0000, C0, C00, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Seas The Day!!

Sep26

Sharing a CAS birthday card I made for a friend using Art Impressions – Loads of Fun Set – Ai5111. We are never too old to still have fun and enjoy life and this gal is showing us how to still have some. LOL!

 

To make the card, I began with the base of 5.5″ x 4.25″ Hammermill – Premium Colour cardstock. Using my MISTI and Memento – Tuxedo Black ink, the image was stamped onto Copic Marker X-Press It Blending Cardstock and coloured in with Copic Markers. Once everything was coloured, the sentiments were stamped with Versa Fine – Onyx Black ink and then embossed with Ranger – Clear Super Fine Detail Embossing Powder. Marvy Uchida – Embossing Heat Tool was used to heat the embossing powder. I added double-sided tape to the back of the image and attached it directly to the base card.

Card Recipe:

Stamp and Sentiments: Loads of Fun Set – Ai5111 – Art Impressions

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Embossing Powder: Ranger – Clear Super Fine Detail

Miscellaneous: Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Eye Shadow and Glasses: YG17, YG11, B00

Hair: E47, E44, E43, E41

Nightgown: V12, V9, V06, V04, C1, C0, Atyou Spica – Lavender – 01, Gelly Roll Sakura #10 Pen

Housecoat: RV09, RV06, RV04, RV02, Atyou Spica – Blossom – 14

Ironing Board: B04, B02, B01, B00, C9, C5, C4, C3, C1

Shadow: E35, E34, E33

Hope you like it and have a great week!

Congrats! You Did It!!

Sep25

Sharing a card I made today using KLM Digital Designs –  Thumbs Up Gnome from the new September release. This gnome is great for so many different cards! I just love him!

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card.  The image was coloured in with Copic markers and then fussy cut around with a thin white border. I cut the sentiment with my cutter and then inked around the edges with Tim Holtz Distress Ink – Salty Ocean and a Picket Fence Studio Blender Brush.

For the base card, I used Hammermill – Premium Colour 100 lb. cardstock and cut it and scored it to be 5.5″ x 5.25″. I taped around the edges with painters tape and then used multiple Tim Holtz Distress Inks listed below and Picket Fence Studio Blender Brushes to create the background. Once I was satisfied, I removed the tape. I die cut Hammermill – Premium Colour 100 lb. cardstock using my Cuttlebug and Your Next Stamp – Confetti Panel Die. I added some 3M VHB – 2 sided tape to the back of the panel and popped it on top of the background. 3M VHB – 2 sided tape was added to the backs of the image and sentiment and they were both popped up on top of the panel die cut. Lastly, I added in some Kraftin’ Kimmie – Polar Dots to finish off the card.

Card Recipe:

Stamp and sentiment:  Thumbs Up Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks: Salty Ocean, Cracked Pistachio, Mustard Seed, Picked Rasberry and Peacock Feathers

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: Your Next Stamp – Confetti Panel Die – YNSD770

Miscellaneous: 3M VHB – 2 sided tape, Picket Fence Studio Blender Brushes, Kraftin’ Kimmie – Polar Dots

Image coloured with Copic Markers:

Skin and Mouth: E21, E11, E00, E000

Beard: E47, E45, E43, E41

Jeans: B26, B23, B21

Shirt and Hat: B09, BG05, BG02, BG01

Shoes: E27, E25, E23

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

All Dressed Up!!

Sep24

Sharing a card I made today using this adorable witch from All Dressed Up Digital Designs – Magical Day. This adorable little witch is all ready for Hallowe’en!

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and die cut with Hero Arts – Infinity Die Ovals.

For the base card, I used Hammermill – Premium Colour 100 lb. and cut it and scored it to be 5.5″ x 4.25″. On the left side, I used the following: Echo Park – I Love Halloween – Cut to the size of 5.5″ x 1.5″ and then I applied double-sided tape to the back and attached the spider Decorative Ribbon (07-3018478). Then, I used, double-sided tape and attached it directly to the base. I cut paper from the same paper pack to be 5.5″ x 2″ and inked around the edges with Tim Holtz Distress Ink – Carved Pumpkin. I applied this to the right side of the card using double-sided tape. For the centre, I cut orange cardstock to the size of 5.5″ x 1″ and Craft Consortium – Happy Haunting paper, cut to the size of 5.5″ x .75″. I inked all of the edges with Tim Holtz Distress Ink – Carved Pumpkin and then layered them using double-sided tape over top of the other 2 prints. I popped up the image over top of the background and added some Kraftin’ Kimmie Dots – Summer Dots and Kraftin’ Kimmie Dots – Polar Dots to finish off the card.

Card Recipe:

Stamp and sentiment: Magical Day – All Dressed Up Digital Stamps

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Carved Pumpkin

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Craft Consortium – Happy Haunting (6″ x 6″), Echo Park – I Love Halloween (6″ x 6″), Orange – Cardstock

Die Cuts: Hero Arts – Infinity Die Ovals

Embossing Powder: Ranger – Holographic

Miscellaneous: Ranger Emboss It Pen – Clear, Decorative Ribbon (07-3018478), Pop-Up Tape, Kraftin’ Kimmie Dots – Summer Dots, Kraftin’ Kimmie Dots – Polar Dots

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Hair: V25, V17, V09, V04, BV08

Hat, Cat and Shoes: C8, C6, C4

Bows: YR68, YR31, YR18, Y38

Dress and Leggings: V17, V09, V04, YR68, YR18, Y38, G14, YG23, YG13, C8, C6, C4

Wings: YG0000, V000, YR000, Ranger – Holographic Embossing Powder, Ranger Emboss It Pen – Clear

Pumpkin: E08, YR16, YR14, YR12, C8, C6

Stars: V09, Atyou Spica – Lavender (01), Gelly Roll Stardust – Clear

Shadow: C2, C1, C0

Hope you like it and have a great week!

If you are a member of Passionate Paper Creations & Friends FB group
you can go to the top of the page and get a shopping discount.
If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Santa’s Coming!!!

Sep22

It’s Wednesday, and this week, I made a card using Motorin’ By Santa – T094 by High Hopes Rubber Stamps for the main image and Coming To Town – G271 (High Hopes Rubber Stamps) for the sentiment. Santa’s motoring through town to bring everyone some Christmas Cheer!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut the background paper from Stampin’ Up – Snowflake Splendor Designer Series Paper to be the same size as the base and inked around the edges using Tim Holtz Distress Ink – Salty Ocean. I applied this directly to the base card using double-sided tape. AC – Black cardstock was cut to 5.5″ x .75″ and adhered to the bottom using double-sided tape. I die cut the village using my Cutttlebug, Hammermill – Premium Colour 100 lb. cardstock and Village Edges dies from Elizabeth Craft Designs. I coloured in the homes and put some yellow cardstock behind for the windows. Then I took the little doors, coloured them in and inset them back into the die cuts. Once this was done, I added Gina K Designs – Glitz Glitter Gel – Iridescent to the hills and Stickles – Diamond to the roof tops.

With my MISTI and Memento – Tuxedo Black ink, I stamped both the image and the sentiment onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers and then I fussy cut around it. I added Stickles – Xmas Red to the Holly on the motorbike and Stickles – Diamond to the pop pom on Santa’s hat. Using my Cuttlebug, I die cut the sentiment using Whimsy Stamps – Quick Strips Die Set. I ran this through my Xyron Create a Sticker and placed it on some red cardstock. Then using my cutter, I cut around it leaving a slim border.

Once everything was dry, it was time to assemble the remainder of the card. I applied the houses directly to the base over top of the road. The Santa image and sentiment were both popped up onto the background using 3M double-sided tape.

Card Recipe:

Stamp: Motorin’ By Santa – T094 (High Hopes Rubber Stamps)

Sentiment: Coming To Town – G271 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., AC – Black, Stampin’ Up – Snowflake Splendor Designer Series Paper (12″ x 12″)

Die Cuts: Elizabeth Craft Designs – 1691 – Village Edges, Whimsy Stamps – Quick Strips Die Set – WSD330

Stickles: Xmas Red and Diamond

Tools: MISTI – Most Incredible Stamping Tool, 3M – 2 sided tape, Gina K Designs – Glitz Glitter Gel – Iridescent, Xyron Create a Sticker

Image coloured with Copic Markers:

Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen

Skin: E21, E11, E00, E000, R30, R20

Santa Hat, Clothing: R59, R37, R35

Mitts, Seat, Boots and Wheels: C8, C6, C4

Santa’s Beard, Trim and Smoke: C2, C1, C0

Motorcycle, Decorations, Wheel Hubs and Fenders: R59, R37, R35, G14, YG23, YG11, C8, C6, C5, C4, C3, C2, C1, Y08

Houses: C5, C4, C3, C1, C0, E55, E53, E51, E50, E44, E43, E41, E15, E13, BV25, BV13, BV11, BV02, B26, B24, B23

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Good Things To Come!!

Sep20

Sharing a card I made today using KLM Digital Designs – Jumping Gnome for the main image and Thumbs Up Gnome for the sentiment from the new September release.

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. I die-cut the image using Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B. The image was coloured in with Copic markers. I printed out the black and white image again onto regular photocopy paper and used by Brother Scan and Cut to die cut the image to use as a mask. I created the grass background and then attached the mask to the coloured image. A combination of Avery Elle – Pierced Clouds Die (D-05-01) which I created stencils from and Tim Holtz Distress Ink – Salty Ocean and Tim Holtz Distress Inks – Tumbled Glass were used to create the clouds in the sky. I accidentally used too much ink for the one cloud, so I decided to cover it up by creating a few trees in the background.

For the base card, I used Hammermill – Premium Colour 100 lb. cardstock and cut it and scored it to be 5.5″ x 5.5″.  Using double-sided tape, I attached the coloured image to some black cardstock and then used my trimmer to create a small border. I then added double-sided tape to the back of the black cardstock and adhered it directly to the base to finish off my card.

Card Recipe:

Stamp and sentiment: Jumping Gnome – KLM Digital Designs, Thumbs Up Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Black Cardstock

Die Cuts: Avery Elle – Pierced Clouds Die (D-05-01), Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Miscellaneous: Brother Scan and Cut

Image coloured with Copic Markers:

Skin and Mouth: E21, E11, E00, E000, R26, R24

Beard: E47, E45, E43

Jeans and Hat: B26, B23, B21

Shirt: E89, E87, E84

Shoes: E27, E25, E23

Grass: YG17, YG13, YG03, YG01

Trees: YG67, YG63, R25

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.