Tag Archive | Versa Fine – Onyx Black

Birthday Wishes!


Today I’m sharing a birthday card that I made for my mom using Yummy Cupcake Bunny (CYNS592) (#Your Next Stamp) on the front of the card and  Rosie Rabbit Gift (CYNS542) (#Your Next Stamp) on the inside of the card.

On the inside:

To make the card I stamped the images on to Copic Marker X-Press It Blending Card using Memento – Tuxedo Black and my MISTI – Most Incredible Stamping Tool to get a nice clean crisp image. After colouring the images, I fussy cut around them both. I then used My Creative Time – Scalloped Stitched Oval Dies to die cut an oval out of Doodle Bug Designs Inc. – Sugar Shoppe paper. I cut the remainder of the paper to be 4″ x 5.25″ and turned it over to the opposite side and mounted it onto a card base of 4.25″ x 5.5″. I used Tim Holtz Distress Ink – Picked Raspberry to ink around the edges.

For the sentiments I used Versa Fine Onyx Black and VersaMark ink and then embossed both with Ranger embossing powders listed below.

To complete the card, I mounted the bunny on the front with 3M VHB – 2 sided tape to pop it up as well as the sentiment.

Card Recipe:

Stamp and Sentiment: Yummy Cupcake Bunny (CYNS592) (#Your Next Stamp), Rosie Rabbit Gift (CYNS542) (#Your Next Stamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Versa Fine – Onyx Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Hot Pink cardstock

Die Cuts:  My Creative Time – Scalloped Stitched Oval Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Bunnies: E29, E27, E25, E23, R30, R02, R85, R83

Cupcake and Wrapper: BG18, BG15, BG11, BG10, YR18, YR16, RV09, RV04, RV02, RV00, E35, E33, E31

Presents and Ribbons: BG18, BG15, BG11, BG10, YR18, YR15, Y06, Y04, Y02, RV04, RV02, RV00

Background: B04, B02, B00

Hope you like it and have a great week!

You can find more cards to inspire you at Roberta Stevenson on my Facebook page.

Love Every Little Moment


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card that I made using Mix and Match Clear Stamps (DC19095) (Dreamerland Crafts)!  Love the images for this stamp. There are so many different scenes that can be created. I chose to do a night scene with the 2 best friends sharing the serenity of the night sky.

To make this card, I first die cut some Bristol paper and then drew in the hills with light pencil and traced around the stamps to get the general idea of placement. I created a masked image of the bear and bunny using Inkadoo Stamping Mask Paper and Post-It Note for the hills and cut them both out. Next I erased all of the lines so that you could barely see them and stamped the bear and the bunny image directly onto the Bristol Paper. Next, I mounted the mask of the characters and hills that I had cut out previously over top of the stamped images so that they would be protected while I coloured in the sky.

To do the sky I used a mixture of Tim Holtz inks listed below and PrismaColor pencils. Then I blended all of the colours together using Gamsol and a blending paper stump. I repeated the process with the PrismaColor pencils several times.

Once the sky was completed, I removed the stencil for the grass and proceeded to colour it in using the same technique that I had used for the sky.

Lastly, I removed the mask for the bear and bunny and coloured them in. I added in some small trees using a Black Prismacolor pencil.

I popped my finished image, back into my MISTI again and stamped the sentiment using VersaMark. I also stamped in the stars in the sky and embossed everything with Ranger Embossing Powder White – Extra Fine Detail. I also used a brush and tapped some of the white embossing powder all over the sky. Then heated it with my Marvy Uchida – Embossing Heat Tool. Lastly, I stamped and embossed the seagulls using VersaFine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder. I coloured them in using Black PrismaColor pencil and then added in some highlights on the wings.

I popped up the coloured image and blue cardstock with 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: Mix and Match Clear Stamps (DC19095) (Dreamerland Crafts)

Inks: Versa Fine – Onyx Black, Versa Mark, (Sky Base): Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Black Soot

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder.

Paper: Inkadoo Stamping Mask Paper, Blue and Green – Recollections paper, Bristol Paper

Die Cuts:  My Creative Time -Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with PrismaColor Pencils:

Sky:  Indigo Blue (PC901), Indanthrone Blue (PC208), Violet Blue (PC933), Denim Blue (PC1101), Black (PC935)

Grass: Dark Green (PC908), Peacock Green (PC907), Marine Green (PC988), Grass Green (909)

Bear: Dark Brown (PC946), Dark Umber (PC947), Chocolate (PC1082), Burnt Ochre (PC943), Sienna Brown (PC945)

Rabbit: 30% Warm Grey (PC1052), 20% Warm Grey (PC1051), 10% Warm Grey (PC1050)

Seagull Wings Highlight: White (PC938), Denim Blue (PC933)

All colours were blended with paper stump and Gamsol blending fluid.

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Panda Party


Hi There! Today I’m sharing a card for my friend who absolutely LOVES Panda bears. Every year, I try to find a new panda image to make her card with and this year I used Party Like A Panda (Simon Says Stamps) to make this fun card.

I used my MISTI, Memento – Tuxedo Black ink and Copic Marker X-Press It Blending Card to get a nice clear image when interchanging the various stamps from this set. Then, I die cut the main image using Your Next Stamp – Stitched Rectangle Die Set. I coloured in the images with Copic Markers and then stamped the presents separately. After colouring the presents, I fussy cut around them and added them to the card. I inserted the image back into the MISTI and used Versa Fine – Onyx Black to stamp “Birthday” and Embossed with Ranger – Clear Super Fine Detail embossing powder.

Next I used a small stamping block and added in the extra confetti and coloured it in to complete the background. Lastly, I mounted the image with 3M VHB 2-sided tape onto a 5.5″ x 4.25″ Hot Pink cardstock base.

Card Recipe:

Stamp and Sentiments: Party Like A Panda (Simon Says Stamps)

Die Cut: Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Ink: Memento – Tuxedo Black, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Pink Cardstock

Embossing Powder: Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB 2-sided tape, Marvy Uchida – Embossing Heat Tool

Images coloured with Copic Markers:

Panda Bears: W5, W3, W1, W0, E53, Sakura Glaze – Black

Balloons and Confetti: RV66, RV55, RV14, RV13, RV00, R81, V06, V04, V01, V000, BG57, BG53, B26, B24, B00, B000, G17, G14, G000, YG41

Cake and Icing: E29, E27, E25, E13, RV66, RV14, RV13, R81

Candles: R24, Y17, Y08, Y000, Y00, V04, V01

Plate: BV23, BV20, Colorless Blender

Hat: BG57, BG53, B26, B24, B21, B00

Horn: E15, Y35, Y17, Y08

Grass: G17, G14, G09, G07, YG41, YG23, YG21, YG13, YG11

Hope you like it and have a terrific week!

Super Tall Cake!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card that I made using Dreamerland Crafts Clear Stamps  Super Tall Cake – D19017 for the main image and Birthday Sentiments – Set 002 (DS163007) for the sentiment!  This adorable little bear made a cake for someone very special! Hmmm! I wonder who that could be. LOL!

To make the card I first die cut Copic Marker X-Press It Blending Card with Craftin Desert Diva’s – Inside Scalloped Squares. Then using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the paper. I coloured in the image using Copic markers.

Next I cut out used some tape to inlay the image back into the frame that I had previously die cut to make it one piece again. I also die cut the yellow and aqua paper with the same die cut twice. Then I used the yellow to be the inlay for the aqua frame and taped it back together on the reverse. After that, I used my MISTI and Versa Fine – Onyx Black to apply the sentiment. The sentiment was then embossed with Ranger – Clear Super Fine Detail embossing powder and heated up using Marvy Uchida – Embossing Heat Tool.

Next, I edged around the borders of both frames with Tim Holtz Distress Ink – Evergreen Bough. I ran the base frame through Xyron Creative Station to make it into a sticker and so that the entire frame would lay flat. I mounted this onto 5″ x 5″ white cardstock. Then I popped up the smaller frame and image using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Super Tall Cake – D19017 (Dreamerland Crafts Clear Stamps)

Sentiments: Birthday Sentiments – Set 002 (DS163007) (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Evergreen Bough

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Momenta – Cardstock, Recollections – Blue Ombre Cardstock, Recollections – White Cardstock

Die Cuts: Craftin Desert Diva’s – Inside Scalloped Squares

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool, Xyron Creative Station

Image coloured with Copic Markers:

Bear: E53, E51, E50, E37, E35, E33, E31, R30, R22, R20, R02

Hat, Apron and Cart: C3, C2, C1, C0, Colorless Blender

Cake: E29, E27, E25, E23, B04, B02, Y35, Y08

Tablecloth: Mitts and Boots: B04, B02, B000

Icing: BG49, BG45, BG11

Bunny: C3, C1, C0, R22, R20

Whistle: G17, G14

Base: E15, E13, E11

Background: Y19, Y18, Y15, Y11

 

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Wishing You the Sweetest Things!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing Dreamerland Craft Stamps Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar and Love The Music From My Guitar – D172006! This little boy loves his guitar and all of the animals love his music.

To make his card, I stamped all of the images using my MISTI, Memento – Tuxedo Black ink and Copic Marker X-Press It Blending Card. I coloured in all of the images using Copic markers and then used my Cuttlebug and all of the die cuts from Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps). I also die cut the sentiment at the same time and stamped it with Versa Fine – Onyx Black and then heat embossed it using Marvy Uchida – Embossing Heat Tool and Ranger – Clear Super Fine Detail embossing powder..

I was now ready to do the background. To achieve this I cut several die cuts using Monte Mart A4 Watercolour Book paper, Lawn Cuts – Simple Stitched Hillside Borders – Lawn Fawn and Your Next Stamp – Stitched Rectangle Die Set (YNSD214).

For the sky I used several Tim Holtz Blue inks in various shades listed below using a stencil that I had created from Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie. For the grass I used various shades of Tim Holtz green inks – (see below).

I ran all of the die cuts and the back 2 layers of grass through Xyron Creative Station. Then I set them all aside.

I was now ready to assemble my card. I layered the first 2 die cuts onto the main die cut and then popped up the bottom grass cut with 3M VHB – 2 sided tape. I then added on the characters that I made stickers out of for easy assembly. I popped up the upper half of the little dog with 3M VHB – 2 sided tape. Once the scene was completed I mounted it onto 5.25″ x 4.25″ white cardstock.

Card Recipe:

Stamps and Sentiment: Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps), Love The Music From My Guitar – D172006 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Clouds: Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Broken China

Grass: Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Bundled Sage, Tim Holtz Distress Ink – Twisted Citron, Tim Holtz Distress Inks – Peeled Paint

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Mont Mart A4 Watercolour Book paper – Acid Free – 190 GSM, Recollections – White Cardstock

Die Cuts:  Your Next Stamp – Stitched Rectangle Die Set (YNSD214), Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps), Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

Shirt: BG49, BG45, BG34

Pants: B26, B23, B21

Guitar: E99, E97, E93, E51, E35, E33, E31, YR27

Bird: B04, B02, B00, Y38

Dog: E35, E34, E33, E31

Rabbit: C7, C5, C3, R30, R02

Cat: W9, W7, W5

Pig: E93,E04, R20, R00, R000, E44, E04

Background: B04, B02, B00

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Hello My Friend


Welcome Back Dreamerland Craft Fans!

Dreamerland released some brand new stamps in October 2019 and today, I’m sharing Hello My Friend (D19080) from the October Character release!

I stamped the image onto Copic Marker X-Press It Blending Card and coloured it with Copic markers. Once it was all coloured, I fussy cut around it leaving a small white border. I then added the final touch on the pom-poms with Stickles Pink and Stickles Aqua.

I used a 5-1/2″ x 4-1/4″ white card for my base. I then cut the patterned paper from Doodle Bug Designs Inc. – Sugar Shoppe at 5-1/4″ x 4″ , inked the edges with Tim Holtz Distress Ink – Evergreen Bough and mounted it onto the white base.

For the ovals I used the die cuts from My Creative Time – Scalloped Stitched Oval Dies, to create the various layers. I used the same paper pad to cut the small oval. Miscellaneous scrap paper that I had for the second oval and white for the last oval. I popped up the first 2 ovals using 3M VHB – 2 sided tape onto the largest oval and then mounted the large oval directly onto the base. Then, I popped up the image using the same 2 sided tape on the top oval.

To finish off the card, I stamped the sentiment using Versa Fine – Onyx Black and then embossed with Ranger – Clear Super Fine Detail embossing powder. Cut around the sentiment and then mounted it onto card using 3M VHB – 2 sided tape.

All edges were inked with Tim Holtz Distress Ink – Evergreen Bough before mounting onto card.

Card Recipe:

Stamp and Sentiment: Hello My Friend (D19080) (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Versa Fine – Onyx Black

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail.

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, White Cardstock

Die Cuts:  My Creative Time – Scalloped Stitched Oval Dies

Embossing Powder: Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Girl 1:

Hair: E57, E55, E53, E50

Dress, Boots and Hat: BG57, BG34, BG32, BG11, BG000, Stickles – Aqua

Girl 2:

Dress 2, Boots and Hat: R59, R56, R34, R81, Stickles – Pink

Hair: E47, E44, E43

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Birthday Wishes Come True!


Sharing a birthday card that I made for a friend using the images and sentiments from Birthday Song CYNS724 (#Your Next Stamp).

Inside of the card:

Stamp and Sentiments: Birthday Song CYNS724 (Your Next Stamp)

Paper: Copic Marker X-Press It Blending Card, Echo Parks Paper Co. – Birthday Wishes by Alisha Gordon – 6″ x 6″ Paper Pads, Echo Park Paper Co. – Happy Birthday Boy 6″ x 6″

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Die Cuts: Mini Balloon Trio Die Set (YNSD241) (#Your Next Stamp)

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Miscellaneous: MISTI – Most Incredible Stamping Tool

Coloured With Copic Markers:

Dogs: E53, E51, E39, E37, E35, E34, E33, C9, R37, R35, R32

Hats: Y19, Y08, Y02

Guitar: B39, B37, B34

Shadow: C2, C1, Colorless Blender